Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Cerium promoted V-g-C3N4 as highly efficient heterogeneous catalysts for the direct benzene hydroxylation.

ABSTRACT: A series of Ce x -V-g-C3N4 catalysts with different cerium content were synthesized by a facile co-assembly method. Compared with pure V-g-C3N4 catalyst, the addition of cerium facilitated the high dispersion of vanadium species as well as the benzene adsorption ability of the corresponding catalysts. Also, the existence of cerium promoted the partial reduction of vanadium species, which improved the redox property of vanadium species as the active centres. The Ce x -V-g-C3N4 catalysts showed considerably improved activity in the benzene hydroxylation reaction compared with V-g-C3N4 catalyst. Among the catalysts studied, Ce0.07-0.07?V-g-C3N4 exhibited the best catalytic activity with a benzene conversion of 33.7% and a phenol yield of 32.3% with good structural and catalytic stability, while only 24.7% of benzene conversion and phenol yield of 24.2% were obtained over 0.07?V-g-C3N4.

SUBMITTER: Wang C

PROVIDER: S-EPMC6030258 | biostudies-literature | 2018 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Cerium promoted V-g-C3N4 as highly efficient heterogeneous catalysts for the direct benzene hydroxylation.

Wang Cheng C Hu Liya L Wang Meiyin M Yue Bin B He Heyong H

Royal Society open science 20180627 6

A series of Ce x -V-g-C3N4 catalysts with different cerium content were synthesized by a facile co-assembly method. Compared with pure V-g-C3N4 catalyst, the addition of cerium facilitated the high dispersion of vanadium species as well as the benzene adsorption ability of the corresponding catalysts. Also, the existence of cerium promoted the partial reduction of vanadium species, which improved the redox property of vanadium species ...[more]

PMID: 30110402

Similar Datasets

Hollow PdAg-CeO2 heterodimer nanocrystals as highly structured heterogeneous catalysts.

Project description:In the present work, hollow PdAg-CeO2 heterodimer nanocrystals (NCs) were prepared and tested as catalysts for the selective hydrogenation of alkynes. These nanostructures combine for the first time the beneficial effect of alloying Pd with Ag in a single NC hollow domain with the formation of active sites at the interface with the CeO2 counterpart in an additive manner. The PdAg-CeO2 NCs display excellent alkene selectivity for aliphatic alkynes. For the specific case of hydrogenation of internal alkynes such as 4-octyne, very low over-hydrogenation and isomerization products were observed over a full conversion regime, even after prolonged reaction times. These catalytic properties were remarkably superior in comparison to standard catalysts. The promotion of Ag on the moderation of the reactivity of the Pd phase, in combination with the creation of interfacial sites with the CeO2 moiety in the same nanostructure, is pointed as the responsible of such a remarkable catalytic performance.

| S-EPMC6906419 | biostudies-literature

Sub-Nanometer Thick Gold Nanosheets as Highly Efficient Catalysts.

Project description:2D metal nanomaterials offer exciting prospects in terms of their properties and functions. However, the ambient aqueous synthesis of atomically-thin, 2D metallic nanomaterials represents a significant challenge. Herein, freestanding and atomically-thin gold nanosheets with a thickness of only 0.47 nm (two atomic layers thick) are synthesized via a one-step aqueous approach at 20 °C, using methyl orange as a confining agent. Owing to the high surface-area-to-volume ratio, abundance of unsaturated atoms exposed on the surface and large interfacial areas arising from their ultrathin 2D nature, the as-prepared Au nanosheets demonstrate excellent catalysis performance in the model reaction of 4-nitrophenol reduction, and remarkable peroxidase-mimicking activity, which enables a highly sensitive colorimetric sensing of H2O2 with a detection limit of 0.11 × 10-6 m. This work represents the first fabrication of freestanding 2D gold with a sub-nanometer thickness, opens up an innovative pathway toward atomically-thin metal nanomaterials that can serve as model systems for inspiring fundamental advances in materials science, and holds potential across a wide region of applications.

| S-EPMC6839621 | biostudies-literature

Single Atomic Cu-N2 Catalytic Sites for Highly Active and Selective Hydroxylation of Benzene to Phenol.

Project description:Searching for an efficient single-atom catalyst for benzene hydroxylation to phenol is of critical importance, but it still remains a challenge. Herein, a single-atom catalyst with unique Cu-N2 moieties (Cu1-N2/HCNS) was prepared and confirmed by HAADF-STEM and EXAFS. Turnover number (TON) over Cu1-N2/HCNS (6,935) is 3.4 times of Cu1-N3/HCNS (2,034) under the same reaction conditions, and both exhibit much higher phenol selectivity (close to 99%) and stability compared with Cu nanoparticles and nanoclusters. Experiments and DFT calculations reveal that atomically dispersed Cu species are active sites for benzene hydroxylation to phenol, and the Cu-N2 is more active than Cu-N3 owing to its much lower energy barrier concerning the activation of H2O2 led by its unique coordination state of local atomic structure. We envision that this work opens a new window for modulating coordination environments of single metallic atoms in catalysis design.

| S-EPMC6880104 | biostudies-literature

Copper nanoparticles on controlled pore glass (CPG) as highly efficient heterogeneous catalysts for "click reactions".

Project description:We herein report that supported copper nanoparticles (CuNPs) on commercially available controlled pore glass (CPG), which exhibit high mechanical, thermal and chemical stability as compared to other silica-based materials, serve as a useful heterogeneous catalyst system for 1,3-dipolar cycloadditions ("click" reactions) between terminal alkynes and organic azides under green chemistry conditions. The supported CuNPs-CPG catalyst exhibited a broad substrate scope and gave the corresponding triazole products in high yields. The CuNPs-CPG catalyst exhibit recyclability and could be reuced multiple times without contaminating the products with Cu.

| S-EPMC7688963 | biostudies-literature

Hydrogen-bonding 2D metal-organic solids as highly robust and efficient heterogeneous green catalysts for Biginelli reaction.

Project description:Two new Zn(II) and Cd(II) MOFs have been synthesized. These MOFs have been applied as heterogeneous catalysts for the green synthesis of a variety of dihydropyrimidinone derivatives through the Biginelli reaction and the desired products were obtained in high yields with short reaction time under mild solvent- free conditions. Moreover, the MOF catalysts may be readily recovered after the reaction and reused for many cycles.

| S-EPMC3203686 | biostudies-literature

Highly efficient TiO2-supported Co-Cu catalysts for conversion of glycerol to 1,2-propanediol.

Project description:Glycerol is a low-cost byproduct of the biodiesel manufacturing process, which can be used to synthesize various value-added chemicals. Among them, 1,2-propanediol (1,2-PDO) is of great interest because it can be used as an intermediate and additive in many applications. This work investigated the hydrogenolysis of glycerol to 1,2-PDO over Co-Cu bimetallic catalysts supported on TiO2 (denoted as CoCu/TiO2) in aqueous media. The catalysts were prepared using the co-impregnation method and their physicochemical properties were characterized using several techniques. The addition of appropriate Cu increased the glycerol conversion and the 1,2-PDO yield. The highest 1,2-PDO yield was achieved over a 15Co0.5Cu/TiO2 catalyst at 69.5% (glycerol conversion of 95.2% and 1,2-PDO selectivity of 73.0%). In the study on the effects of operating conditions, increasing the reaction temperature, initial pressure, and reaction time increased the glycerol conversion but decreased the selectivity to 1,2-PDO due to the degradation of formed 1,2-PDO to lower alcohols (1-propanol and 2-propanol). The reaction conditions to obtain the maximum 1,2-PDO yield were a catalyst-to-glycerol ratio of 0.028, a reaction temperature of 250 °C, an initial H2 pressure of 4 MPa, and a reaction time of 4 h.

| S-EPMC8630069 | biostudies-literature

Efficient Catalysts for Cyclohexane Dehydrogenation Synthesized by Mo-Promoted Growth of 3D Block Carbon Coupled with Mo2C.

Project description:Cyclohexane can serve as a good dihydrogen (H2) carrier and a safer medium to store and transport H2, as it is liquid under ambient conditions and it has a relatively high hydrogen density per unit volume (0.056 g(H2)/cm3(Cy)liq.). However, cyclohexane can release H2 only with efficient cyclohexane dehydrogenation catalysts. Here, we report the synthesis of three-dimensional micron-sized block carbon-molybdenum carbide (BCMC) composite materials that can serve as noble-metal-free catalysts for cyclohexane dehydrogenation. The materials are synthesized by a facile hydrothermal synthetic route, and their structures and morphologies are characterized by various analytical techniques. The results show that the BCMCs, along with specific morphologies, form when a source of Mo is included in the precursor and that the sizes of the microparticles in them can be tailored by changing the relative amount of Mo used for their synthesis. The as-synthesized BCMC materials exhibit high catalytic activity for cyclohexane dehydrogenation while remaining stable and maintaining their catalytic activities during the reaction. The materials' catalytic activity increases as the amount of Mo used to make the materials is increased. This is further found to be because the BCMC materials containing higher amounts of ammonium molybdate or higher densities of Mo2C provide substantially lower activation energies for the reaction. These materials can be expected to find industrial applications for catalytic production of H2 from hydrocarbons.

| S-EPMC6644852 | biostudies-literature

Highly Active Ce- and Mg-Promoted Ni Catalysts Supported on Cellulose-Derived Carbon for Low-Temperature CO2 Methanation.

Project description:The CO2 methanation performance of Mg- and/or Ce-promoted Ni catalysts supported on cellulose-derived carbon (CDC) was investigated. The samples, prepared by biomorphic mineralization techniques, exhibit pore distributions correlated to the particle sizes, revealing a direct effect of the metal content in the textural properties of the samples. The catalytic performance, evaluated as CO2 conversion and CH4 selectivity, reveals that Ce is a better promoter than Mg, reaching higher conversion values in all of the studied temperature range (150-500 °C). In the interval of 350-400 °C, Ni-Mg-Ce/CDC attains the maximum yield to methane, 80%, reaching near 100% CH4 selectivity. Ce-promoted catalysts were highly active at low temperatures (175 °C), achieving 54% CO2 conversion with near 100% CH4 selectivity. Furthermore, the large potential stability of the Ni-Mg-Ce/CDC catalyst during consecutive cycles of reaction opens a promising route for the optimization of the Sabatier process using this type of catalyst.

| S-EPMC9161724 | biostudies-literature

g-C3N4-modified Zr-Fc MOFs as a novel photocatalysis-self-Fenton system toward the direct hydroxylation of benzene to phenol.

Project description:In order to explore a green, economic, and sustainable phenol production process, a heterojunction semiconductor materials g-C3N4/Zr-Fc MOF was synthesized via an in situ synthesis method. With the synergistic effect of photocatalysis and the Fenton effect, the composite could effectively catalyze the direct hydroxylation of benzene to phenol under visible light irradiation. The yield of phenol and the selectivity were 13.84% and 99.38% under the optimal conditions, respectively, and it could still maintain high photocatalytic activity after 5 photocatalytic cycles. Therefore, the designed photocatalysis-self-Fenton system has great potential in the field of the direct hydroxylation of benzene to phenol.

| S-EPMC10288341 | biostudies-literature

Functional Porous Ionic Polymers as Efficient Heterogeneous Catalysts for the Chemical Fixation of CO2 under Mild Conditions.

Project description:The development of efficient and metal-free heterogeneous catalysts for the chemical fixation of CO2 into value-added products is still a challenge. Herein, we reported two kinds of polar group (-COOH, -OH)-functionalized porous ionic polymers (PIPs) that were constructed from the corresponding phosphonium salt monomers (v-PBC and v-PBH) using a solvothermal radical polymerization method. The resulting PIPs (POP-PBC and POP-PBH) can be used as efficient bifunctional heterogeneous catalysts in the cycloaddition reaction of CO2 with epoxides under relatively low temperature, ambient pressure, and metal-free conditions without any additives. It was found that the catalytic activities of the POP-PBC and POP-PBH were comparable with the homogeneous catalysts of Me-PBC and PBH and were higher than that of the POP-PPh3-COOH that was synthesized through a post-modification method, indicating the importance of the high concentration catalytic active sites in the heterogeneous catalysts. Reaction under low CO2 concentration conditions showed that the activity of the POP-PBC (with a conversion of 53.8% and a selectivity of 99.0%) was higher than that of the POP-PBH (with a conversion of 32.3% and a selectivity of 99.0%), verifying the promoting effect of the polar group (-COOH group) in the porous framework. The POP-PBC can also be recycled at least five times without a significant loss of catalytic activity, indicating the high stability and robustness of the PIPs-based heterogeneous catalysts.

| S-EPMC9269538 | biostudies-literature