Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Highly efficient TiO₂-supported Co-Cu catalysts for conversion of glycerol to 1,2-propanediol.

ABSTRACT: Glycerol is a low-cost byproduct of the biodiesel manufacturing process, which can be used to synthesize various value-added chemicals. Among them, 1,2-propanediol (1,2-PDO) is of great interest because it can be used as an intermediate and additive in many applications. This work investigated the hydrogenolysis of glycerol to 1,2-PDO over Co-Cu bimetallic catalysts supported on TiO₂ (denoted as CoCu/TiO₂) in aqueous media. The catalysts were prepared using the co-impregnation method and their physicochemical properties were characterized using several techniques. The addition of appropriate Cu increased the glycerol conversion and the 1,2-PDO yield. The highest 1,2-PDO yield was achieved over a 15Co0.5Cu/TiO₂ catalyst at 69.5% (glycerol conversion of 95.2% and 1,2-PDO selectivity of 73.0%). In the study on the effects of operating conditions, increasing the reaction temperature, initial pressure, and reaction time increased the glycerol conversion but decreased the selectivity to 1,2-PDO due to the degradation of formed 1,2-PDO to lower alcohols (1-propanol and 2-propanol). The reaction conditions to obtain the maximum 1,2-PDO yield were a catalyst-to-glycerol ratio of 0.028, a reaction temperature of 250 °C, an initial H₂ pressure of 4 MPa, and a reaction time of 4 h.

SUBMITTER: Mondach W

PROVIDER: S-EPMC8630069 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Catalytic Conversion of Biomass-Derived 1,2-Propanediol to Propylene Oxide over Supported Solid-Base Catalysts.

Project description:A series of supported alkali metal salts were investigated as catalysts to produce propylene oxide (PO) from biomass-derived 1,2-propanediol via dehydrative epoxidation in a solid-gas reaction system. The effects of supports, cations, and anions in the alkali metal salts and calcination temperature were investigated by X-ray diffraction and CO2-temperature-programmed desorption. The results indicate the catalysts with relative mild basicity having higher yields of PO. The highest yield of PO is 58.2% from reactions at 400 °C at an atmospheric pressure over KNO3/SiO2. In addition, the catalyst could be reused after calcination in air at 550 °C.

| S-EPMC6644628 | biostudies-literature

CeO2-Supported TiO2-Pt Nanorod Composites as Efficient Catalysts for CO Oxidation.

Project description:Supported Pt-based catalysts have been identified as highly selective catalysts for CO oxidation, but their potential for applications has been hampered by the high cost and scarcity of Pt metals as well as aggregation problems at relatively high temperatures. In this work, nanorod structured (TiO2-Pt)/CeO2 catalysts with the addition of 0.3 at% Pt and different atomic ratios of Ti were prepared through a combined dealloying and calcination method. XRD, XPS, SEM, TEM, and STEM measurements were used to confirm the phase composition, surface morphology, and structure of synthesized samples. After calcination treatment, Pt nanoparticles were semi-inlayed on the surface of the CeO2 nanorod, and TiO2 was highly dispersed into the catalyst system, resulting in the formation of (TiO2-Pt)/CeO2 with high specific surface area and large pore volume. The unique structure can provide more reaction path and active sites for catalytic CO oxidation, thus contributing to the generation of catalysts with high catalytic activity. The outstanding catalytic performance is ascribed to the stable structure and proper TiO2 doping as well as the combined effect of Pt, TiO2, and CeO2. The research results are of importance for further development of high catalytic performance nanoporous catalytic materials.

| S-EPMC9959209 | biostudies-literature

Hydrogenolysis of glycerol over TiO2-supported Pt-WOx catalysts: Effects of the TiO2 crystal phase and WOx loading.

Project description:The selective hydrogenolysis of glycerol to 1,3-propanediol (1,3-PDO) with high added value is attraction but challenging. Pt-WOx-based catalysts have been extensively studied in the selective hydrogenolysis of glycerol. The catalyst support and the physicochemical state of WOx play important roles on this reaction. In this paper, Pt-WOx catalysts supported on TiO2 with different crystal forms were prepared and studied for their catalytic performance in hydrogenolysis of glycerol. It was observed that the catalytic performance of anatase-type (A-type) TiO2-supported catalyst (Pt/W/A-Ti) is much better than that of the rutile-type (R-type) TiO2 catalyst (Pt/W/R-Ti) due to its higher stability. Furthermore, the influence of W loading amount and state were thoroughly investigated for the Pt/W/A-Ti catalysts, and Pt/W/A-TiO2 with 5 wt% loading of WOx achieved the best catalytic performance (100% conversion of glycerol and 41% yield of 1,3-PDO under the optimal reaction conditions), owing to the suitable WOx domains and high dispersion of W species, as evidenced by XRD patterns and TEM images. Mechanism study by in-situ DRIFTS experiments indicated that glycerol was first converted to 3-hydroxypropanal and then converted to 1,3-PDO through subsequent reactions.

| S-EPMC9532750 | biostudies-literature

Turning Biodiesel Waste Glycerol into 1,3-Propanediol: Catalytic Performance of Sulphuric acid-Activated Montmorillonite Supported Platinum Catalysts in Glycerol Hydrogenolysis.

Project description:Direct C-O hydrogenolysis of bioglycerine to produce 1,3-propanediol selectively is a vital technology that can expand the scope of biodiesel industry and green chemical production from biomass. Herein we report sulphuric acid-activated montmorillonite clay supported platinum nanoparticles as highly effective solid acid catalysts for the selective production of 1,3-propanediol from glycerol. The catalytic performances of the catalysts were investigated in the hydrogenolysis of glycerol with a fixed bed reactor under ambient pressure. The results were found promising and showed that the activation of montmorillonite by sulphuric acid incorporated Brønsted acidity in the catalyst and significantly improved the selectivity to 1,3-propanediol. The catalytic performance of different platinum loaded catalysts was examined and 2?wt% Pt/S-MMT catalyst presented superior activity among others validating 62% 1,3-propanediol selectivity at 94% glycerol conversion. The catalytic activity of 2Pt/S-MMT was systematically investigated under varying reaction parameters including reaction temperature, hydrogen flow rate, glycerol concentration, weight hourly space velocity, and contact time to derive the optimum conditions for the reaction. The catalyst stability, reusability and structure-activity correlation were also elucidated. The high performance of the catalyst could be ascribed to well disperse Pt nanoparticles immobilized on acid-activated montmorillonite, wider pore-structure and appropriate acid sites of the catalyst.

| S-EPMC5945670 | biostudies-literature

Mg(OH)2 -Facilitated Liquid-Phase Conversion of Lactic Acid into 1,2-Propanediol over Cu: An Experimental and Theoretical Study.

Project description:Mg(OH)2 is found to exhibit superior performance in the liquid-phase conversion of lactic acid (LA) into 1,2-propanediol over Cu. A conversion of 90?% with a selectivity of 98?% is achieved at 513?K and 5?MPa H2 . Mg(LA)2 could be identified as a crucial intermediate in this reaction, as it undergoes faster conversion than the combination of LA and Mg(OH2 ) and regeneration of Mg(OH)2 through the conversion of Mg(LA)2 as a substrate. DFT calculations reveal that the energetic span of the reaction decreases from 46.6?kcal?mol-1 catalyzed with no cation to 43.6?kcal?mol-1 with [Mg(OH)]+ , confirming the facilitating effect of Mg(OH)2 .

| S-EPMC6973064 | biostudies-literature

Towards selective electrochemical conversion of glycerol to 1,3-propanediol.

Project description:1,3-propanediol (1,3-PD) is a bulk chemical with myriad applications in polymers, lubricants, cosmetics, foods industries and in the synthesis of heterocyclic compounds. Current commercial production of 1,3-PD involves a thermocatalytic process using acrolein (DuPont) and ethylene oxide (Shell) as starting feedstock. These feedstocks are petroleum-based and there are many efforts at using glycerol as low cost biomass-derived feedstock for 1,3-PD production. A number of catalyst designs and bacterial & fungal strains are being explored for respective catalytic and fermentation routes to glycerol-to-1,3-PD. However, the electrochemical method received little attention for the purpose. In this work, in order to explore the possibility of using partly refined glycerol byproduct of biodiesel production as feedstock, we investigated conversion and 1,3-PD selectivity of glycerol electrolysis in chloride media. We demonstrated selective glycerol-to-1,3-PD conversion using Pt or RuO2-based dsa as anode and Zn or Pb as cathode in NaCl and KCl at pH 1. This electrochemical glycerol-to-1,3-PD conversion is not only green, it is a potential process network loop between biodiesel production and chlor-alkali industry.

| S-EPMC9078992 | biostudies-literature

Designation of highly efficient catalysts for one pot conversion of glycerol to lactic acid.

Project description:Production of lactic acid from glycerol is a cascade catalytic procedure using multifunctional catalysts combined with oxidative and acidic catalytic sites. Therefore, a series of silver-exchanged phosphomolybdic acid catalysts (AgxH3-xPMo12O40, x?=?1?~?3, abbreviated as AgxPMo) was designed and applied in glycerol oxidation with O2 as an oxidant to produce lactic acid (LA) without adding any base. Among all, total silver exchanged phosphomolybdic acid (Ag3PMo) was found to be the most active one with LA selectivity of 93% at 99% conversion under mild conditions of 5?h at 60?°C. The exceptionally high efficiency was contributed to the generation of strong Lewis acid sites, enhanced redox potentials and water-tolerance. More importantly, Ag3PMo was tolerant in crude glycerol from biodiesel production. And the reaction mechanism was also discussed. Meanwhile, Ag3PMo acted as a heterogeneous catalyst for 12 recycles without loss of activity.

| S-EPMC4949431 | biostudies-literature

Clarifying solvent effect during photocatalytic glycerol conversion on TiO2/GQD as selective photocatalyst.

Project description:Nowadays, dealing with the growing chemical and energy demands is important without compromising the environment. So, this work studies photocatalytic glycerol conversion (as biomass derivativ feedstock) into value-added products using an eco-friendly synthesized catalyst. Graphene quantum dots (GQDs) were prepared from available/cheap precursors like glucose via the hydrothermal method and used as a support for TiO2. TiO2/GQDs were characterized via different analytical techniques, revealing very small particle sizes of ~ 3-6 nm with a large surface area of ~ 253 m2/g and a band gap of ~ 2.6 eV. The prepared photocatalyst shows good efficiency during photocatalytic glycerol conversion to dihydroxyacetone (DHA). Different reaction conditions were tested: reaction time, catalyst amount, presence of oxidant (H2O2), and biphasic media (aqueous/organic phases). Comparing a monophasic (H2O) photoreactor with a biphasic reactor containing 90% organic phase (ethyl acetate) and 10% aqueous phase (H2O and/or H2O2) indicates that the presence of H2O2 increases glycerol conversion and liquid selectivity to reach 57% and 91%, respectively after 120 min. However, it still suffers a low DHA/GA ratio (2.7). On the other hand, using a biphasic reactor in the presence of an H2O2 oxidant increases the DHA/GA ratio to ~ 6.6, which was not reached in previous research. The formation of H2O/H2O2 as micro-reactors dispersed in the ethyl acetate phase increased the average light intensity effect of the glycerol/photocatalyst system in the micro-reactors. Unlike previous work, this work presents a facile way to prepare eco-friendly/cheap (noble metal free) photocatalysts for glycerol conversion to ultrapure DHA using a biphasic photoreactor.

| S-EPMC10710419 | biostudies-literature

Hydrogenation of Lactic Acid to 1,2-Propanediol over Ru-Based Catalysts.

Project description:The catalytic hydrogenation of lactic acid to 1,2-propanediol with supported Ru catalysts in water was investigated. The influence of catalyst support (activated carbon, ?-Al2O3, SiO2, TiO2, and CeO2) and promoters (Pd, Au, Mo, Re, Sn) on the catalytic performance was evaluated. Catalytic tests revealed that TiO2 yields the best Ru catalysts. With a monometallic Ru/TiO2 catalyst, a 1,2-propanediol yield of 70?% at 79?% lactic acid conversion was achieved at 130?°C after 20?h reaction. Minor byproducts of the hydrogenation reaction were propionic acid, ethanol, 1-propanol, and 2-propanol. For the bimetallic catalysts, the addition of Pd and Au slightly enhanced the performance of Ru/TiO2, whereas the addition of common hydrogenation promoters such as Re, Mo, and Sn impaired the activity.

| S-EPMC5838540 | biostudies-literature

Stable Cu Catalysts Supported by Two-dimensional SiO2 with Strong Metal-Support Interaction.

Project description:Cu-based catalysts exhibit excellent performance in hydrogenation reactions. However, the poor stability of Cu catalysts under high temperatures has restricted their practical applications. The preparation of stable Cu catalysts supported by SiO2 with strong metal-support interaction (SMSI) has thus aroused great interest due to the high abundance, low toxicity, feasible processability, and low cost of SiO2 . The challenge in the construction of such SMSI remains to be the inertness of SiO2 . Herein, a simple and scalable method is developed to prepare 2D silica (2DSiO2 ) supported Cu catalysts with SMSI by carefully manipulating the topological exfoliation of CaSi2 with CuCl2 and thereafter calcination. The prepared Cu-2DSiO2 catalysts with the unique encapsulated Cu nanoparticles exhibit excellent activity and long-term stability in high-temperature CO2 hydrogenation reactions. This feasible and low-cost solution for stabilizing Cu catalysts might shed light on their realistic applications.

| S-EPMC8948561 | biostudies-literature