Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Dislocation driven nanosample plasticity: new insights from quantitative in-situ TEM tensile testing.

ABSTRACT: Intrinsic dislocation mechanisms in the vicinity of free surfaces of an almost FIB damage-free single crystal Ni sample have been quantitatively investigated owing to a novel sample preparation method combining twin-jet electro-polishing, in-situ TEM heating and FIB. The results reveal that the small-scale plasticity is mainly controlled by the conversion of few tangled dislocations, still present after heating, into stable single arm sources (SASs) as well as by the successive operation of these sources. Strain hardening resulting from the operation of an individual SAS is reported and attributed to the decrease of the length of the source. Moreover, the impact of the shortening of the dislocation source on the intermittent plastic flow, characteristic of SASs, is discussed. These findings provide essential information for the understanding of the regime of 'dislocation source' controlled plasticity and the related mechanical size effect.

SUBMITTER: Samaee V

PROVIDER: S-EPMC6089927 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Source truncation and exhaustion: insights from quantitative in situ TEM tensile testing.

Project description:A unique method for quantitative in situ nanotensile testing in a transmission electron microscope employing focused ion beam fabricated specimens was developed. Experiments were performed on copper samples with minimum dimensions in the 100-200 nm regime oriented for either single slip or multiple slip, respectively. We observe that both frequently discussed mechanisms, truncation of spiral dislocation sources and exhaustion of defects available within the specimen, contribute to high strengths and related size-effects in small volumes. This suggests that in the submicrometer range these mechanisms should be considered simultaneously rather than exclusively.

| S-EPMC3172822 | biostudies-other

Strength, Hardening, and Failure Observed by In Situ TEM Tensile Testing.

Project description:We present in situ transmission electron microscope tensile tests on focused ion beam fabricated single and multiple slip oriented Cu tensile samples with thicknesses in the range of 100-200 nm. Both crystal orientations fail by localized shear. While failure occurs after a few percent plastic strain and limited hardening in the single slip case, the multiple slip samples exhibit extended homogenous deformation and necking due to the activation of multiple dislocation sources in conjunction with significant hardening. The hardening behavior at 1% plastic strain is even more pronounced compared to compression samples of the same orientation due to the absence of sample taper and the interface to the compression platen. Moreover, we show for the first time that the strain rate sensitivity of such FIB prepared samples is an order of magnitude higher than that of bulk Cu.

| S-EPMC3573867 | biostudies-other

Direct observation of dislocation plasticity in high-Mn lightweight steel by in-situ TEM.

Project description:To gain the fundamental understanding of deformation mechanisms in an aluminum-containing austenitic high-Mn steel (Fe-32Mn-8.9Al-0.78?C (wt.%)), in-situ straining transmission electron microscopy (TEM) analysis is conducted. The in-situ observation during the deformation demonstrates that the plastic deformation is accommodated by the pronounced planar dislocation gliding followed by the formation of slip bands (SBs) and highly dense dislocation walls (HDDWs). Experimental evidences of the glide plane softening can be obtained from the interaction between the gliding perfect dislocations and the L'12 ordered precipitates in the austenite matrix. Furthermore, the observation of the localized cross-slip of dislocations at the slip band intersections enables to understand why slip bands are extensively developed without mutual obstructions between the slip bands. The enhanced strain hardening rate of the aluminum-containing austenitic high-Mn steels can be attributed to the pronounced planar dislocation glides followed by formation of extensive slip band which prevent premature failure by suppressing strain localization.

| S-EPMC6811588 | biostudies-literature

Low-temperature plasticity of olivine revisited with in situ TEM nanomechanical testing.

Project description:The rheology of the lithospheric mantle is fundamental to understanding how mantle convection couples with plate tectonics. However, olivine rheology at lithospheric conditions is still poorly understood because experiments are difficult in this temperature range where rocks and mineral become very brittle. We combine techniques of quantitative in situ tensile testing in a transmission electron microscope and numerical modeling of dislocation dynamics to constrain the low-temperature rheology of olivine. We find that the intrinsic ductility of olivine at low temperature is significantly lower than previously reported values, which were obtained under strain-hardened conditions. Using this method, we can anchor rheological laws determined at higher temperature and can provide a better constraint on intermediate temperatures relevant for the lithosphere. More generally, we demonstrate the possibility of characterizing the mechanical properties of specimens, which can be available in the form of submillimeter-sized particles only.

| S-EPMC4795657 | biostudies-literature

In Situ Quantitative Tensile Testing of Antigorite in a Transmission Electron Microscope.

Project description:The determination of the mechanical properties of serpentinites is essential toward the understanding of the mechanics of faulting and subduction. Here we present the first in situ tensile tests on antigorite in a transmission electron microscope. A push-to-pull deformation device is used to perform quantitative tensile tests, during which force and displacement are measured, while the evolving microstructure is imaged with the microscope. The experiments have been performed at room temperature on 2 × 1 × 0.2 μm3 beams prepared by focused ion beam. The specimens are not single crystals despite their small sizes. Orientation mapping indicated that several grains were well oriented for plastic slip. However, no dislocation activity has been observed even though the engineering tensile stress went up to 700 MPa. We show also that antigorite does not exhibit a purely elastic-brittle behavior since, despite the presence of defects, the specimens accumulate permanent deformation and did not fail within the elastic regime. Instead, we observe that strain localizes at grain boundaries. All observations concur to show that under these experimental conditions, grain boundary sliding is the dominant deformation mechanism. This study sheds a new light on the mechanical properties of antigorite and calls for further studies on the structure and properties of grain boundaries in antigorite and more generally in phyllosilicates.

| S-EPMC7375155 | biostudies-literature

In-situ tensile testing of ZrCu-based metallic glass composites.

Project description:ZrCu-based bulk metallic glass composites (BMGCs) are well known for their plastic deformability, superior to traditional metallic glasses (MGs), which is attributed to a unique dual-phases structure, namely, the glassy matrix and unstable B2 phase. In the present study, in-situ tensile testing is used to trace the deformation process of a ZrCu-based BMGC. Three deformation stages of the BMGC, i.e., the elastic-elastic stage, the elastic-plastic stage, and the plastic-plastic stage are identified. In the elastic-elastic and elastic-plastic stages, the yield strength and elastic limit are major influenced by the volume fraction of the B2 crystals. In the plastic-plastic stage, the B2 phase stimulates the formation of multiple shear bands and deflects the direction of shear bands by disturbing the stress field in front of the crack tip. The deformation-induced martensitic transformation of the metastable B2 phase contributes to the plasticity and work hardening of the composite. This study highlights the formation and propagation of multiple shear bands and reveals the interactions of shear bands with structural heterogeneities in situ. Especially, the blocking of shear bands by crystals and the martensitic transformation of the B2 phase are critical for the mechanistic deformation process and illustrate the function of the B2 phase in the present BMGCs.

| S-EPMC5854620 | biostudies-literature

In-Situ Electron Channeling Contrast Imaging under Tensile Loading: Residual Stress, Dislocation Motion, and Slip Line Formation.

Project description:Elastoplastic phenomena, such as plastic deformation and failure, are multi-scale, deformation-path-dependent, and mechanical-field-sensitive problems associated with metals. Accordingly, visualization of the microstructural deformation path under a specific mechanical field is challenging for the elucidation of elastoplastic phenomena mechanisms. To overcome this problem, a dislocation-resolved in-situ technique for deformation under mechanically controllable conditions is required. Thus, we attempted to apply electron channeling contrast imaging (ECCI) under tensile loading, which enabled the detection of lattice defect motions and the evolution of elastic strain fields in bulk specimens. Here, we presented the suitability of ECCI as an in-situ technique with dislocation-detectable spatial resolution. In particular, the following ECCI-visualized plasticity-related phenomena were observed: (1) pre-deformation-induced residual stress and its disappearance via subsequent reloading, (2) heterogeneous dislocation motion during plastic relaxation, and (3) planar surface relief formation via loading to a higher stress.

| S-EPMC7021723 | biostudies-literature

Dedicated preparation for in situ transmission electron microscope tensile testing of exfoliated graphene.

Project description:Graphene, which is one of the most promising materials for its state-of-the-art applications, has received extensive attention because of its superior mechanical properties. However, there is little experimental evidence related to the mechanical properties of graphene at the atomic level because of the challenges associated with transferring atomically-thin two-dimensional (2D) materials onto microelectromechanical systems (MEMS) devices. In this study, we show successful dry transfer with a gel material of a stable, clean, and free-standing exfoliated graphene film onto a push-to-pull (PTP) device, which is a MEMS device used for uniaxial tensile testing in in situ transmission electron microscopy (TEM). Through the results of optical microscopy, Raman spectroscopy, and TEM, we demonstrate high quality exfoliated graphene on the PTP device. Finally, the stress-strain results corresponding to propagating cracks in folded graphene were simultaneously obtained during the tensile tests in TEM. The zigzag and armchair edges of graphene confirmed that the fracture occurred in association with the hexagonal lattice structure of graphene while the tensile testing. In the wake of the results, we envision the dedicated preparation and in situ TEM tensile experiments advance the understanding of the relationship between the mechanical properties and structural characteristics of 2D materials.

| S-EPMC7818284 | biostudies-literature

In-situ observation of the initiation of plasticity by nucleation of prismatic dislocation loops.

Project description:The elastic-to-plastic transition during the deformation of a dislocation-free nanoscale volume is accompanied by displacement bursts associated with dislocation nucleation. The dislocations that nucleate during the so-called "pop-in" burst take the form of prismatic dislocation loops (PDLs) and exhibit characteristic burst-like emission and plastic recovery. Here, we report the in-situ transmission electron microscopy (TEM) observation of the initial plasticity ensued by burst-like emission of PDLs on nanoindentation of dislocation-free Au nanowires. The in-situ TEM nanoindentation showed that the nucleation and subsequent cross slip of shear loop(s) are the rate-limiting steps. As the indentation size increases, the cross slip of shear loop becomes favored, resulting in a transition from PDLs to open half-loops to helical dislocations. In the present case of nanoindentation of dislocation-free volumes, the PDLs glide out of the indentation stress field while spreading the plastic zone, as opposed to the underlying assumption of the Nix-Gao model.

| S-EPMC7217955 | biostudies-literature

Cyclic Buckling Characterization of an Individual MWCNT Using Quantitative In Situ TEM Axial Compression.

Project description:Carbon nanotubes (CNTs) are extremely conductive and flexible, making them ideal for applications such as flexible electronics and nanoelectromechanical systems. However, in order to properly apply them in such devices, their long-term durability must be assessed. In the present study, we demonstrate cyclic loading of a thick MWCNT (175 nm) under axial compression, observed in situ under a transmission electron microscope (TEM). The force was applied via controlled displacement, while real-time TEM videos of the deformation process were gathered to produce the morphological data. The in situ observations combined with force-displacement curves revealed the onset of buckling instabilities, and the elastic limits of the tube were assessed. The MWCNT retained its original structure even after 68 loading-unloading cycles, despite observed clues for structural distortions. The stiffness of the tube, calculated after each loading cycle, was in a 0.15 to 0.28 TPa range-comparable to the literature, which further validates the measurement set-up. These in situ tests demonstrate the resilience of CNTs to fatigue which can be correlated with the CNTs' structure. Such correlations can help tailoring CNTs' properties to specific applications.

| S-EPMC9865386 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data