Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Direct Synthesis of Co-doped Graphene on Dielectric Substrates Using Solid Carbon Sources.

ABSTRACT: Direct synthesis of high-quality doped graphene on dielectric substrates without transfer is highly desired for simplified device processing in electronic applications. However, graphene synthesis directly on substrates suitable for device applications, though highly demanded, remains unattainable and challenging. Here, a simple and transfer-free synthesis of high-quality doped graphene on the dielectric substrate has been developed using a thin Cu layer as the top catalyst and polycyclic aromatic hydrocarbons as both carbon precursors and doping sources. N-doped and N, F-co-doped graphene have been achieved using TPB and F₁₆CuPc as solid carbon sources, respectively. The growth conditions were systematically optimized and the as-grown doped graphene were well characterized. The growth strategy provides a controllable transfer-free route for high-quality doped graphene synthesis, which will facilitate the practical applications of graphene.

SUBMITTER: Wang Q

PROVIDER: S-EPMC6223911 | biostudies-literature | 2015

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Direct Synthesis of Co-doped Graphene on Dielectric Substrates Using Solid Carbon Sources.

Wang Qi Q Zhang Pingping P Zhuo Qiqi Q Lv Xiaoxin X Wang Jiwei J Sun Xuhui X

Nano-micro letters 20150716 4

Direct synthesis of high-quality doped graphene on dielectric substrates without transfer is highly desired for simplified device processing in electronic applications. However, graphene synthesis directly on substrates suitable for device applications, though highly demanded, remains unattainable and challenging. Here, a simple and transfer-free synthesis of high-quality doped graphene on the dielectric substrate has been developed using a thin Cu layer as the top catalyst and polycyclic aromat ...[more]

PMID: 30464984

Similar Datasets

Scalable and direct growth of graphene micro ribbons on dielectric substrates.

Project description:Here we report on a scalable and direct growth of graphene micro ribbons on SiO(2) dielectric substrates using a low temperature chemical vapor deposition. Due to the fast annealing at low temperature and dewetting of Ni, continuous few-layer graphene micro ribbons grow directly on bare dielectric substrates through Ni assisted catalytic decomposition of hydrocarbon precursors. These high quality graphene micro ribbons exhibit low sheet resistance of ~700 ? -2100 ?, high on/off current ratio of ~3, and high carrier mobility of ~655 cm(2)V(-1)s(-1) at room temperature, all of which have shown significant improvement over other lithography patterned CVD graphene micro ribbons. This direct approach can in principle form graphene ribbons of any arbitrary sizes and geometries. It allows for a feasible methodology towards better integration with semiconductor materials for interconnect electronics and scalable production for graphene based electronic and optoelectronic applications where the electrical gating is the key enabling factor.

| S-EPMC3583003 | biostudies-literature

Growth of Hexagonal Columnar Nanograin Structured SiC Thin Films on Silicon Substrates with Graphene-Graphitic Carbon Nanoflakes Templates from Solid Carbon Sources.

Project description:We report a new method for growing hexagonal columnar nanograin structured silicon carbide (SiC) thin films on silicon substrates by using graphene-graphitic carbon nanoflakes (GGNs) templates from solid carbon sources. The growth was carried out in a conventional low pressure chemical vapor deposition system (LPCVD). The GGNs are small plates with lateral sizes of around 100 nm and overlap each other, and are made up of nanosized multilayer graphene and graphitic carbon matrix (GCM). Long and straight SiC nanograins with hexagonal shapes, and with lateral sizes of around 200-400 nm are synthesized on the GGNs, which form compact SiC thin films.

| S-EPMC5452306 | biostudies-other

Scalable bottom-up synthesis of Co-Ni-doped graphene.

Project description:Introducing heteroatoms into graphene is a powerful strategy to modulate its catalytic, electronic, and magnetic properties. At variance with the cases of nitrogen (N)- and boron (B)-doped graphene, a scalable method for incorporating transition metal atoms in the carbon (C) mesh is currently lacking, limiting the applicative interest of model system studies. This work presents a during-growth synthesis enabling the incorporation of cobalt (Co) alongside nickel (Ni) atoms in graphene on a Ni(111) substrate. Single atoms are covalently stabilized within graphene double vacancies, with a Co load ranging from 0.07 to 0.22% relative to C atoms, controllable by synthesis parameters. Structural characterization involves variable-temperature scanning tunneling microscopy and ab initio calculations. The Co- and Ni-codoped layer is transferred onto a transmission electron microscopy grid, confirming stability through scanning transmission electron microscopy and electron energy loss spectroscopy. This method holds promise for applications in spintronics, gas sensing, electrochemistry and catalysis, and potential extension to graphene incorporation of similar metals.

| S-EPMC11546814 | biostudies-literature

Introducing carbon diffusion barriers for uniform, high-quality graphene growth from solid sources.

Project description:Carbon diffusion barriers are introduced as a general and simple method to prevent premature carbon dissolution and thereby to significantly improve graphene formation from the catalytic transformation of solid carbon sources. A thin Al2O3 barrier inserted into an amorphous-C/Ni bilayer stack is demonstrated to enable growth of uniform monolayer graphene at 600 °C with domain sizes exceeding 50 μm, and an average Raman D/G ratio of <0.07. A detailed growth rationale is established via in situ measurements, relevant to solid-state growth of a wide range of layered materials, as well as layer-by-layer control in these systems.

| S-EPMC3813970 | biostudies-literature

Transcriptome Sequencing of Solid Fermentation under Different Induced Carbon Sources

Project description:Here comparative transcriptomic analyses of Penicillium oxalicum grown on wheat bran (WB), WB plus rice straw (WR) and WB plus Avicel (WA) as the sole carbon source under solid-state fermentation (SSF) revealed that most of differentially expressed genes (DEGs) were involved in metabolism specifically carbohydrate metabolism.

2019-10-15 | GSE131173 | GEO

Boron/nitrogen co-doped carbon synthesized from waterborne polyurethane and graphene oxide composite for supercapacitors.

Project description:We report B/N co-doped carbon materials synthesized by an efficient and easy one-step carbonization method with ferric catalyst treatment from a precursor with boric acid treatment after the formation of the composite between waterborne polyurethane (WPU) and graphene oxide (GO). The nitrogen content was improved with the introduction of numerous melamine in the synthetic process of WPU. In addition, WPU possessed a repetitive basic unit urethane bond (-NHCOO); thus, nitrogen heteroatom could be efficiently introduced into the WPU/GO composite from WPU as a nitrogen-rich carbon. In addition, the specific surface area was increased by the boric acid treatment and washing process. The ferric catalyst treatment could prevent the formation of inert B-N bonds. Thus, the synthesized B/N co-doped carbon materials exhibited high specific capacitance (330 F g-1 at 0.5 A g-1), superior rate performance, and excellent cycling stability. Furthermore, the assembled symmetric supercapacitor displayed a good energy density (7.9 W h kg-1 at 505 W kg-1) and a good capacitance retention of about 89.9% after 5000 charge-discharge cycles in 6 M KOH electrolyte. Therefore, the as-prepared B/N co-doped carbon materials show a promising future in supercapacitor application.

| S-EPMC9059642 | biostudies-literature

Combustion Activation Induced Solid-State Synthesis for N, B Co-Doped Carbon/Zinc Borate Anode with a Boosting of Sodium Storage Performance.

Project description:Zinc borates have merits of low voltage polarization and suitable redox potential, but usually suffer from low rate capability and poor cycling life, as an emerging anode candidate for Na+ storage. Here, a new intercalator-guided synthesis strategy is reported to simultaneously improve rate capability and stabilize cycling life of N, B co-doped carbon/zinc borates (CBZG). The strategy relies on a uniform dispersion of precursors and simultaneously stimulated combustion activation and solid-state reactions capable of scalable preparation. The Na+ storage mechanism of CBZG is studied: 1) ex situ XRD and XPS demonstrate two-step reaction sequence of Na+ storage: Zn6 O(OH)(BO3 )3 +Na+ +e- ↔3ZnO+Zn3 B2 O6 +NaBO2 +0.5H2 ①, Zn3 B2 O6 +6Na+ +6e- ↔3Zn+3Na2 O+B2 O3 ②; reaction ① is irreversible in ether-based electrolyte while reversible in ester-based electrolyte. 2) Electrochemical kinetics reveal that ether-based electrolyte possesses faster Na+ storage than ester-based electrolyte. The composite demonstrates an excellent capacity of 437.4 mAh g-1 in a half-cell, together with application potential in full cells (discharge capacity of 440.1 mAh g-1 and stable cycle performance of 2000 cycles at 5 A g-1 ). These studies will undoubtedly provide an avenue for developing novel synthetic methods of carbon-based borates and give new insights into the mechanism of Na+ storage in ether-based electrolyte for the desirable sodium storage.

| S-EPMC10190504 | biostudies-literature

Transcriptome Sequencing of Solid Fermentation under Different Induced Carbon Sources II

Project description:Transcriptomic profiling and real-time quantitative reverse transcription-PCR analyses revealed that TP05746 dynamically regulated the expression of genes encoding major PBDEs. Furthermore, in vitro binding experiments confirmed that TP05746 directly bound to the promoter regions of these major enzyme genes. Transcription factors mediated the regulation of plant-biomass-degrading enzyme (PBDE) gene expression in Talaromyces pinophilus.

2020-01-13 | GSE131872 | GEO

Direct Synthesis of Large-Area Graphene on Insulating Substrates at Low Temperature using Microwave Plasma CVD.

Project description:With a combination of outstanding properties and a wide spectrum of applications, graphene has emerged as a significant nanomaterial. However, to realize its full potential for practical applications, a number of obstacles have to be overcome, such as low-temperature, transfer-free growth on desired substrates. In most of the reports, direct graphene growth is confined to either a small area or high sheet resistance. Here, an attempt has been made to grow large-area graphene directly on insulating substrates, such as quartz and glass, using magnetron-generated microwave plasma chemical vapor deposition at a substrate temperature of 300 °C with a sheet resistance of 1.3k Ω/□ and transmittance of 80%. Graphene is characterized using Raman microscopy, atomic force microscopy, scanning electron microscopy, optical imaging, UV-vis spectroscopy, and X-ray photoelectron spectroscopy. Four-probe resistivity and Hall effect measurements were performed to investigate electronic properties. Key to this report is the use of 0.3 sccm CO2 during growth to put a control over vertical graphene growth, generally forming carbon walls, and 15-20 min of O3 treatment on as-synthesized graphene to improve sheet carrier mobility and transmittance. This report can be helpful in growing large-area graphene directly on insulating transparent substrates at low temperatures with advanced electronic properties for applications in transparent conducting electrodes and optoelectronics.

| S-EPMC6648798 | biostudies-literature

One-Step Chemical Vapor Deposition Synthesis of 3D N-doped Carbon Nanotube/N-doped Graphene Hybrid Material on Nickel Foam.

Project description:3D hybrid nanostructures connecting 1D carbon nanotubes (CNTs) with 2D graphene have attracted more and more attentions due to their excellent chemical, physical and electrical properties. In this study, we firstly report a novel and facile one-step process using template-directed chemical vapor deposition (CVD) to fabricate highly nitrogen doped three-dimensional (3D) N-doped carbon nanotubes/N-doped graphene architecture (N-CNTs/N-graphene). We used nickel foam as substrate, melamine as a single source for both carbon and nitrogen, respectively. The morphology and microstructure were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, isothermal analyses, X-ray photoelectron microscopy and Raman spectra. The obtained 3D N-CNTs/N-graphene exhibits high graphitization, a regular 3D structure and excellent nitrogen doping and good mesoporosity.

| S-EPMC6164574 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data