Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Growth of Hexagonal Columnar Nanograin Structured SiC Thin Films on Silicon Substrates with Graphene-Graphitic Carbon Nanoflakes Templates from Solid Carbon Sources.

ABSTRACT: We report a new method for growing hexagonal columnar nanograin structured silicon carbide (SiC) thin films on silicon substrates by using graphene-graphitic carbon nanoflakes (GGNs) templates from solid carbon sources. The growth was carried out in a conventional low pressure chemical vapor deposition system (LPCVD). The GGNs are small plates with lateral sizes of around 100 nm and overlap each other, and are made up of nanosized multilayer graphene and graphitic carbon matrix (GCM). Long and straight SiC nanograins with hexagonal shapes, and with lateral sizes of around 200-400 nm are synthesized on the GGNs, which form compact SiC thin films.

SUBMITTER: Liu X

PROVIDER: S-EPMC5452306 | biostudies-other | 2013 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Substantial LIB Anode Performance of Graphitic Carbon Nanoflakes Derived from Biomass Green-Tea Waste.

Project description:Biomass-derived carbonaceous constituents constitute fascinating green technology for electrochemical energy-storage devices. In light of this, interconnected mesoporous graphitic carbon nanoflakes were synthesized by utilizing waste green-tea powders through the sequential steps of air-assisted carbonization, followed by potassium hydroxide activation and water treatment. Green-tea waste-derived graphitic carbon displays an interconnected network of aggregated mesoporous nanoflakes. When using the mesoporous graphitic carbon nanoflakes as an anode material for the lithium-ion battery, an initial capacity of ~706 mAh/g and a reversible discharge capacity of ~400 mAh/g are achieved. Furthermore, the device sustains a large coulombic efficiency up to 96% during 100 operation cycles under the applied current density of 0.1 A/g. These findings depict that the bio-generated mesoporous graphitic carbon nanoflakes could be effectively utilized as a high-quality anode material in lithium-ion battery devices.

| S-EPMC6631619 | biostudies-literature

Graphitic carbon nitride/graphene nanoflakes hybrid system for electrochemical sensing of DNA bases in meat samples.

Project description:This research presents a simple, fast and simultaneous electrochemical quantitative determination of nucleobases, for example guanine (G), adenine (A), and thymine (T) in a beef and chicken livers samples to measure the quality of food products based on hybrids of graphitic carbon nitride/Graphene nanoflakes (g-C3N4/GNF) modified electrode. Graphitic carbon nitride (g-C3N4) made of graphite-like covalent link connects nitrogen, nitride, and carbon atoms in the structural design with improved the electrical properties and low band gap semiconductor. The g-C3N4/GNF nanocomposite was synthesized by the hydrothermal treatment to form a porous g-C3N4 interconnected three dimensional (3D) network of g-C3N4 and GNF. The 3D g-C3N4/GNF/GCE was utilized for the detection of nucleic acid bases with a well resolved oxidation peak for the individual analyte. The electrocatalytic current was established to be a linear range from 0.3?×?10-7 to 6.6?×?10-6, 0.3?×?10-7 to 7.3?×?10-6, and 5.3?×?10-6 to 63.3?×?10-4 M for G, A, and T with a detection limit of 4.7, 3.5 and 55 nM, respectively. The diffusion co-efficient and the kinetic parameters were derived from the chronoamperometry technique. The proposed sensing strategy has been effectively used for the application in real sample analysis and observed that the electrode free from the surface fouling.

| S-EPMC7393070 | biostudies-literature

From 1D to 3D Graphitic Carbon Nitride (Melon): A Bottom-Up Route via Crystalline Microporous Templates.

Project description:Herein, we present a novel bottom-up preparation route for heptazine-based polymers (melon), also known as graphitic carbon nitride. The growth characteristics of isolated 1D melon strings in microporous templates are presented and studied in detail. Removal of the microporous silicate template via etching is accompanied by the self-assembly of a 1D melon to stacked 3D structures. The advantages and limitations of the bottom-up approach are shown by using microporous templates with different pore sizes (ETS-10, ZSM-5, and zeolite Y). In accordance with the molecular size of the heptazine units (0.67 nm), a 1D melon can be deposited in ETS-10 with a pore width of about 0.78 nm, whereas its formation in the smaller 0.47 nm pores of ZSM-5 is sterically impeded. The self-assembly of isolated 1D melon to stacked 3D structures offers a novel experimental perspective to the controversial debate on the polymerization degree in 2D sheets of graphitic carbon nitride as micropore sizes below 1 nm confine the condensation degree of heptazine to isolated 1D strands at a molecular level. The growth characteristics and structural features were investigated by X-ray diffraction, N2 physisorption, scanning transmission electron microscopy/energy-dispersive X-ray analysis, 13C CP-NMR spectroscopy, and attenuated total reflection-infrared spectroscopy.

| S-EPMC8693173 | biostudies-literature

3C-SiC Growth on Inverted Silicon Pyramids Patterned Substrate.

Project description:This work reports on the properties of cubic silicon carbide (3C-SiC) grown epitaxially on a patterned silicon substrate composed of squared inverted silicon pyramids (ISP). This compliant substrate prevents stacking faults, usually found at the SiC/Si interface, from reaching the surface. We investigated the effect of the size of the inverted pyramid on the epilayer quality. We noted that anti-phase boundaries (APBs) develop between adjacent faces of the pyramid and that the SiC/Si interfaces have the same polarity on both pyramid faces. The structure of the heterointerface was investigated. Moreover, due to the emergence of APB at the vertex of the pyramid, voids buried on the epilayer form. We demonstrated that careful control of the growth parameters allows modification of the height of the void and the density of APBs, improving SiC epitaxy quality.

| S-EPMC6829442 | biostudies-literature

Effective Modulation of Optical and Photoelectrical Properties of SnS2 Hexagonal Nanoflakes via Zn Incorporation.

Project description:Tin sulfides are promising materials in the fields of photoelectronics and photovoltaics because of their appropriate energy bands. However, doping in SnS2 can improve the stability and robustness of this material in potential applications. Herein, we report the synthesis of SnS2 nanoflakes with Zn doping via simple hydrothermal route. The effect of doping Zn was found to display a huge influence in the structural and crystalline order of as synthesized SnS2. Their optical properties attest Zn doping of SnS2 results in reduction of the band gap which benefits strong visible-light absorption. Significantly, enhanced photoresponse was observed with respect to pristine SnS2. Such enhancement could result in improved electronic conductivity and sensitivity due to Zn doping at appropriate concentration. These excellent performances show that Sn1-xZnxS2 nanoflakes could offer huge potential for nanoelectronics and optoelectronics device applications.

| S-EPMC6669736 | biostudies-literature

A liquid-crystalline hexagonal columnar phase in highly-dilute suspensions of imogolite nanotubes.

Project description:Liquid crystals have found wide applications in many fields ranging from detergents to information displays and they are also increasingly being used in the 'bottom-up' self-assembly approach of material nano-structuration. Moreover, liquid-crystalline organizations are frequently observed by biologists. Here we show that one of the four major lyotropic liquid-crystal phases, the columnar one, is much more stable on dilution than reported so far in literature. Indeed, aqueous suspensions of imogolite nanotubes, at low ionic strength, display the columnar liquid-crystal phase at volume fractions as low as ? 0.2%. Consequently, due to its low visco-elasticity, this columnar phase is easily aligned in an alternating current electric field, in contrast with usual columnar liquid-crystal phases. These findings should have important implications for the statistical physics of the suspensions of charged rods and could also be exploited in materials science to prepare ordered nanocomposites and in biophysics to better understand solutions of rod-like biopolymers.

| S-EPMC4728447 | biostudies-literature

Enhanced crystallinity of epitaxial graphene grown on hexagonal SiC surface with molybdenum plate capping.

Project description:The crystallinity of epitaxial graphene (EG) grown on a Hexagonal-SiC substrate is found to be enhanced greatly by capping the substrate with a molybdenum plate (Mo-plate) during vacuum annealing. The crystallinity enhancement of EG layer grown with Mo-plate capping is confirmed by the significant change of measured Raman spectra, compared to the spectra for no capping. Mo-plate capping is considered to induce heat accumulation on SiC surface by thermal radiation mirroring and raise Si partial pressure near surface by confining the sublimated Si atoms between SiC substrate and Mo-plate, which would be the essential contributors of crystallinity enhancement.

| S-EPMC5386107 | biostudies-literature

C0.3N0.7Ti-SiC Toughed Silicon Nitride Hybrids with Non-Oxide Additives Ti3SiC2.

Project description:In situ grown C0.3N0.7Ti and SiC, which derived from non-oxide additives Ti3SiC2, are proposed to densify silicon nitride (Si3N4) ceramics with enhanced mechanical performance via hot-press sintering. Remarkable increase of density from 79.20% to 95.48% could be achieved for Si3N4 ceramics with 5 vol.% Ti3SiC2 when sintered at 1600 °C. As expected, higher sintering temperature 1700 °C could further promote densification of Si3N4 ceramics filled with Ti3SiC2. The capillarity of decomposed Si from Ti3SiC2, and in situ reaction between nonstoichiometric TiCx and Si3N4 were believed to be responsible for densification of Si3N4 ceramics. An obvious enhancement of flexural strength and fracture toughness for Si3N4 with x vol.% Ti3SiC2 (x = 1~20) ceramics was observed. The maximum flexural strength of 795 MPa for Si3N4 composites with 5 vol.% Ti3SiC2 and maximum fracture toughness of 6.97 MPa·m1/2 for Si3N4 composites with 20 vol.% Ti3SiC2 are achieved via hot-press sintering at 1700 °C. Pull out of elongated Si3N4 grains, crack bridging, crack branching and crack deflection were demonstrated to dominate enhance fracture toughness of Si3N4 composites.

| S-EPMC7143876 | biostudies-literature

Manganese molybdate nanoflakes on silicon microchannel plates as novel nano energetic material.

Project description:Nano energetic materials have attracted great attention recently owing to their potential applications for both civilian and military purposes. By introducing silicon microchannel plates (Si-MCPs) three-dimensional (3D)-ordered structures, monocrystalline MnMoO4 with a size of tens of micrometres and polycrystalline MnMoO4 nanoflakes are produced on the surface and sidewall of nickel-coated Si-MCP, respectively. The MnMoO4 crystals ripen controllably forming polycrystalline nanoflakes with lattice fringes of 0.542?nm corresponding to the [Formula: see text] plane on the sidewall. And these MnMoO4 nanoflakes show apparent thermite performance which is rarely reported and represents MnMoO4 becoming a new category of energetic materials after nanocrystallization. Additionally, the nanocrystallization mechanism is interpreted by ionic diffusion caused by 3D structure. The results indicate that the Si-MCP is a promising substrate for nanocrystallization of energetic materials such as MnMoO4.

| S-EPMC5750022 | biostudies-literature

Epitaxial diamond-hexagonal silicon nano-ribbon growth on (001) silicon.

Project description:Silicon crystallizes in the diamond-cubic phase and shows only a weak emission at 1.1 eV. Diamond-hexagonal silicon however has an indirect bandgap at 1.5 eV and has therefore potential for application in opto-electronic devices. Here we discuss a method based on advanced silicon device processing to form diamond-hexagonal silicon nano-ribbons. With an appropriate temperature anneal applied to densify the oxide fillings between silicon fins, the lateral outward stress exerted on fins sandwiched between wide and narrow oxide windows can result in a phase transition from diamond-cubic to diamond-hexagonal Si at the base of these fins. The diamond-hexagonal slabs are generally 5-8 nm thick and can extend over the full width and length of the fins, i.e. have a nano-ribbon shape along the fins. Although hexagonal silicon is a metastable phase, once formed it is found being stable during subsequent high temperature treatments even during process steps up to 1050?ºC.

| S-EPMC4523848 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data