Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Silicon germanium photo-blocking layers for a-IGZO based industrial display.

ABSTRACT: Amorphous indium- gallium-zinc oxide (a-IGZO) has been intensively studied for the application to active matrix flat-panel display because of its superior electrical and optical properties. However, the characteristics of a-IGZO were found to be very sensitive to external circumstance such as light illumination, which dramatically degrades the device performance and stability practically required for display applications. Here, we suggest the use for silicon-germanium (Si-Ge) films grown plasma-enhanced chemical vapour deposition (PECVD) as photo-blocking layers in the a-IGZO thin film transistors (TFTs). The charge mobility and threshold voltage (V_th) of the TFTs depend on the thickness of the Si-Ge films and dielectric buffer layers (SiN_X), which were carefully optimized to be ~200?nm and ~300?nm, respectively. As a result, even after 1,000?s illumination time, the V_th and electron mobility of the TFTs remain unchanged, which was enabled by the photo-blocking effect of the Si-Ge layers for a-IGZO films. Considering the simple fabrication process by PECVD with outstanding scalability, we expect that this method can be widely applied to TFT devices that are sensitive to light illumination.

SUBMITTER: Kang SH

PROVIDER: S-EPMC6277433 | biostudies-literature | 2018 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A vertical silicon-graphene-germanium transistor.

Project description:Graphene-base transistors have been proposed for high-frequency applications because of the negligible base transit time induced by the atomic thickness of graphene. However, generally used tunnel emitters suffer from high emitter potential-barrier-height which limits the transistor performance towards terahertz operation. To overcome this issue, a graphene-base heterojunction transistor has been proposed theoretically where the graphene base is sandwiched by silicon layers. Here we demonstrate a vertical silicon-graphene-germanium transistor where a Schottky emitter constructed by single-crystal silicon and single-layer graphene is achieved. Such Schottky emitter shows a current of 692 A cm-2 and a capacitance of 41 nF cm-2, and thus the alpha cut-off frequency of the transistor is expected to increase from about 1 MHz by using the previous tunnel emitters to above 1 GHz by using the current Schottky emitter. With further engineering, the semiconductor-graphene-semiconductor transistor is expected to be one of the most promising devices for ultra-high frequency operation.

| S-EPMC6814790 | biostudies-literature

Diameter-dependent dopant location in silicon and germanium nanowires.

Project description:We report studies defining the diameter-dependent location of electrically active dopants in silicon (Si) and germanium (Ge) nanowires (NWs) prepared by nanocluster catalyzed vapor-liquid-solid (VLS) growth without measurable competing homogeneous decomposition and surface overcoating. The location of active dopants was assessed from electrical transport measurements before and after removal of controlled thicknesses of material from NW surfaces by low-temperature chemical oxidation and etching. These measurements show a well-defined transition from bulk-like to surface doping as the diameter is decreased <22-25 nm for n- and p-type Si NWs, although the surface dopant concentration is also enriched in the larger diameter Si NWs. Similar diameter-dependent results were also observed for n-type Ge NWs, suggesting that surface dopant segregation may be general for small diameter NWs synthesized by the VLS approach. Natural surface doping of small diameter semiconductor NWs is distinct from many top-down fabricated NWs, explains enhanced transport properties of these NWs and could yield robust properties in ultrasmall devices often dominated by random dopant fluctuations.

| S-EPMC2730964 | biostudies-literature

Selective synthesis of germasila-adamantanes through germanium-silicon shift processes.

Project description:The regioselective synthesis of germasila-adamantanes with the germanium atoms in the bridgehead positions is described starting from cyclic precursors by a cationic sila-Wagner-Meerwein (SWM) rearrangement reaction. The SWM rearrangement allows also a deliberate shift of germanium atoms from the periphery and within the cage structures into the bridgehead positions. This opens the possibility for a synthesis of germasila-adamantanes of defined germanium content and controlled regiochemistry. In the same way that sila-adamantane can be regarded as a molecular building block of elemental silicon, the germasila-adamantane molecules represent cutouts of silicon/germanium alloys.

| S-EPMC10445437 | biostudies-literature

Selective One-Pot Syntheses of Mixed Silicon-Germanium Heteroadamantane Clusters.

Project description:Six Gey alloys are emerging materials for modern semiconductor technology. Well-defined model systems of the bulk structures aid in understanding their intrinsic characteristics. Three such model clusters have now been realized in the form of the Six Gey heteroadamantanes [0], [1], and [2] through selective one-pot syntheses starting from Me2 GeCl2 , Si2 Cl6 , and [nBu4 N]Cl. Compound [0] contains six GeMe2 and four SiSiCl3 vertices, whereas one and two of the GeMe2 groups are replaced by SiCl2 moieties in compounds [1] and [2], respectively. Chloride-ion-mediated rearrangement quantitatively converts [2] into [1] at room temperature and finally into [0] at 60 °C, which is not only remarkable in view of the rigidity of these cage structures but also sheds light on the assembly mechanism.

| S-EPMC8596519 | biostudies-literature

Memristors Using Solution-Based IGZO Nanoparticles.

Project description:Solution-based indium-gallium-zinc oxide (IGZO) nanoparticles deposited by spin coating have been investigated as a resistive switching layer in metal-insulator-metal structures for nonvolatile memory applications. Optimized devices show a bipolar resistive switching behavior, low programming voltages of ±1 V, on/off ratios higher than 10, high endurance, and a retention time of up to 104 s. The better performing devices were achieved with annealing temperatures of 200 °C and using asymmetric electrode materials of titanium and silver. The physics behind the improved switching properties of the devices is discussed in terms of the oxygen deficiency of IGZO. Temperature analysis of the conductance states revealed a nonmetallic filamentary conduction. The presented devices are potential candidates for the integration of memory functionality into low-cost System-on-Panel technology.

| S-EPMC6644988 | biostudies-literature

Reproducibility analyses of photo-induced pyroelectric photodetector based on vertically grown SnS layers.

Project description:The data presented in this article includes the photograph of prepared samples and transient photoresponses for 365 and 850 nm wavelengths at different intensities. The original photographs of the working device made of vertically grown SnS layers on Si substrate are presented from the previous results (Kumar et al., 2017, 2018) [1], [2]. Reproducibility measure of the device were checked for thousands of cycles and presented with estimated parameters such as photo current density and photo+pyro current density. Data after analysis are summarized in the table, to profile the photo and pyro responses quantitatively.

| S-EPMC5996739 | biostudies-literature

The Effect of Doping on the Digital Etching of Silicon-Selective Silicon-Germanium Using Nitric Acids.

Project description:Gate-all-around (GAA) field-effect transistors have been proposed as one of the most important developments for CMOS logic devices at the 3 nm technology node and beyond. Isotropic etching of silicon-germanium (SiGe) for the definition of nano-scale channels in vertical GAA CMOS and tunneling FETs has attracted more and more attention. In this work, the effect of doping on the digital etching of Si-selective SiGe with alternative nitric acids (HNO3) and buffered oxide etching (BOE) was investigated in detail. It was found that the HNO3 digital etching of SiGe was selective to n+-Si, p+-Si, and intrinsic Si. Extensive studies were performed. It turned out that the selectivity of SiGe/Si was dependent on the doped types of silicon and the HNO3 concentration. As a result, at 31.5% HNO3 concentration, the relative etched amount per cycle (REPC) and the etching selectivity of Si0.72Ge0.28 for n+-Si was identical to that for p+-Si. This is particularly important for applications of vertical GAA CMOS and tunneling FETs, which have to expose both the n+ and p+ sources/drains at the same time. In addition, the values of the REPC and selectivity were obtained. A controllable etching rate and atomically smooth surface could be achieved, which enhanced carrier mobility.

| S-EPMC8147633 | biostudies-literature

Full-color micro-LED display with photo-patternable and highly ambient-stable perovskite quantum dot/siloxane composite as color conversion layers.

Project description:In this paper, we successfully fabricated color conversion layers (CCLs) for full-color-mico-LED display using a perovskite quantum dot (PQD)/siloxane composite by ligand exchanged PQD with silane composite followed by surface activation by an addition of halide-anion containing salt. Due to this surface activation, it was possible to construct the PQD surface with a silane ligand using a non-polar organic solvent that does not damage the PQD. As a result, the ligand-exchanged PQD with a silane compound exhibited high dispersibility in the siloxane matrix and excellent atmospheric stability due to sol-gel condensation. Based on highly ambient stable PQD/siloxane composite based CCLs, full-color micro-LED display has a 1 mm pixel pitch, about 25.4 pixels per inch (PPI) resolution was achieved. In addition, due to the thin thickness of the black matrix to prevent blue light interference, the possibility of a flexible display that can be operated without damage even with a bending radius of 5 mm was demonstrated.

| S-EPMC10039071 | biostudies-literature

Giant non-linear susceptibility of hydrogenic donors in silicon and germanium.

Project description:Implicit summation is a technique for the conversion of sums over intermediate states in multiphoton absorption and the high-order susceptibility in hydrogen into simple integrals. Here, we derive the equivalent technique for hydrogenic impurities in multi-valley semiconductors. While the absorption has useful applications, it is primarily a loss process; conversely, the non-linear susceptibility is a crucial parameter for active photonic devices. For Si:P, we predict the hyperpolarizability ranges from ? (3)/n 3D?=?2.9 to 580?×?10-38?m5/V2 depending on the frequency, even while avoiding resonance. Using samples of a reasonable density, n 3D, and thickness, L, to produce third-harmonic generation at 9?THz, a frequency that is difficult to produce with existing solid-state sources, we predict that ? (3) should exceed that of bulk InSb and ? (3) L should exceed that of graphene and resonantly enhanced quantum wells.

| S-EPMC6804565 | biostudies-literature

Perovskite Photodetectors Based on p-i-n Junction With Epitaxial Electron-Blocking Layers.

Project description:Organic-inorganic hybrid perovskite single crystals (PSCs) have been emerged as remarkable materials for some optoelectronic applications such as solid-state photodetectors, solar cells and light emitting diodes due to their excellent optoelectronic properties. To decrease the dark current, function layers based on spin-coating method are frequently requested for intrinsic PSCs to block the injected current by forming energy barrier. However, the amorphous function layers suffer from small carrier mobility and high traps density, which limit the speed of the photoelectric response of perovskite devices. This work supposes to grow thick MAPbBr3 and MAPbI3 mono-crystalline thin films on the surface of intrinsic MAPbBr2.5Cl0.5 PSCs substrate by a heteroepitaxial growth technique to act as electron-blocking layers. Meanwhile, C60 and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) layers are deposited on the opposite surface of substrate PSCs by spin-coating method to block injected holes. This Au-MAPbI3-MAPbBr3-MAPbBr2.5Cl0.5PSCs-C60-PCBM-Ag heterostructure can be used as excellent X-ray photodetector (XPD) due to its low dark current density of 6.97 × 10-11 A cm-2 at -0.5 V bias, high responsivity of 870 mA/W at -100 V bias and X-ray sensitivity as high as 59.7 μC mGy-1 cm-2 at -50 V bias.

| S-EPMC7522216 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data