Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Dataset on the microstructure morphology and elemental composition of the palm kernel shell and the coconut kernel shell by TEM/SEM and EDXA/EDS.

ABSTRACT: Coconut kernel shell (CKS) and palm kernel shell (PKS) powders were analyzed using Surface Electron Microcopy (SEM) and Transmission Electron Microscopy (TEM). The SEM and TEM were combined with Energy Dispersive X-ray Spectroscopy Analysis for elemental composition of the sample materials. The micrographs of all samples were thoroughly examined and explained. The dataset presented herein helps to elucidate the ultrastructure and could suggest expanding traditional applications of the PKS/CKS to novel ones. The data are related to the research article "Insight on the Ultrastructure, Physicochemical and Thermal Characteristics and Applications of the Palm Kernel Shells" (Ntenga et al., 2018).

SUBMITTER: Ntenga R

PROVIDER: S-EPMC6307344 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Production of bioadsorbent from phosphoric acid pretreated palm kernel shell and coconut shell by two-stage continuous physical activation via N<sub>2</sub> and air.

Project description:In the present study, agricultural biomass-palm kernel shell (PKS) and coconut shell (CS)-was used to produce high porosity bioadsorbent using two-stage continuous physical activation method with different gas carrier (air and N2) in each stage. The activation temperature was set constant at 600, 700, 800 or 900°C for both activation stages with the heating rate of 3°C min-1. Two parameters, the gas carrier and activation temperature, were determined as the significant factors on the adsorption properties of bioadsorbent. BET, SEM, FTIR, TGA, CHNS/O and ash content were used to elucidate the developed bioadsorbent prepared from PKS and CS and its capacity towards the adsorption of methylene blue and iodine. The novel process of two-stage continuous physical activation method was able to expose mesopores and micropores that were previously covered/clogged in nature, and simultaneously create new pores. The synthesized bioadsorbents showed that the surface area (PKS: 456.47 m2 g-1, CS: 479.17 m2 g-1), pore size (PKS: 0.63 nm, CS: 0.62 nm) and pore volume (PKS: 0.13 cm3 g-1, CS: 0.15 cm3 g-1) were significantly higher than that of non-treated bioadsorbent. The surface morphology of the raw materials and synthesized bioadsorbent were accessed by SEM. Furthermore, the novel process meets the recent industrial adsorbent requirements such as low activation temperature, high fixed carbon content, high yield, high adsorption properties and high surface area, which are the key factors for large-scale production of bioadsorbent and its usage.

| S-EPMC6304154 | biostudies-literature

In situ elemental analyses of living biological specimens using 'NanoSuit' and EDS methods in FE-SEM.

Project description:Energy dispersive X-ray spectroscopy (EDS) carried out alongside scanning electron microscopy (SEM) is a common technique for elemental analysis. To investigate "wet" biological specimens, complex pre-treatments are required to stabilize them under the high vacuum conditions of high-resolution SEM. These often produce unwanted artifacts. We have previously reported that the polymerization of natural surface substances on organisms by the electron beam of the SEM setup or by plasma irradiation causes a nano-scale layer to form-called a "NanoSuit"-that can act as a barrier and keep organisms alive and hydrated in a field-emission SEM system. In the study reported herein, we examined the suitability of the NanoSuit method for elemental analyses of biological specimens by EDS. We compared experimental results for living Drosophila larvae and Aloe arborescens specimens prepared by the NanoSuit method and by conventional fixation. The NanoSuit method allowed accurate detection of the elemental compositions at high resolution. By contrast, specimens prepared by the conventional fixation method displayed additional EDS signals corresponding to the elements in the chemicals involved in the fixation process. Our results demonstrate that the NanoSuit method is useful for studying hydrous samples via EDS and SEM, particularly in biological sciences.

| S-EPMC7471950 | biostudies-literature

Dataset on the assessment of pervious concrete containing palm oil kernel shell and seashell in heavy metal removal from stormwater

Project description: Not available

| S-EPMC10519824 | biostudies-literature

Primary Products from Fast Co-Pyrolysis of Palm Kernel Shell and Sawdust.

Project description:Co-pyrolysis is one possible method to handle different biomass leftovers. The success of the implementation depends on several factors, of which the quality of the produced bio-oil is of the highest importance, together with the throughput and constraints of the feedstock. In this study, the fast co-pyrolysis of palm kernel shell (PKS) and woody biomass was conducted in a micro-pyrolyser connected to a Gas Chromatograph-Mass Spectrometer/Flame Ionisation Detector (GC-MS/FID) at 600 °C and 5 s. Different blend ratios were studied to reveal interactions on the primary products formed from the co-pyrolysis, specifically PKS and two woody biomasses. A comparison of the experimental and predicted yields showed that the co-pyrolysis of the binary blends in equal proportions, PKS with mahogany (MAH) or iroko (IRO) sawdust, resulted in a decrease in the relative yield of the phenols by 19%, while HAA was promoted by 43% for the PKS:IRO-1:1 pyrolysis blend, and the saccharides were strongly inhibited for the PKS:MAH-1:1 pyrolysis blend. However, no difference was observed in the yields for the different groups of compounds when the two woody biomasses (MAH:IRO-1:1) were co-pyrolysed. In contrast to the binary blend, the pyrolysis of the ternary blends showed that the yield of the saccharides was promoted to a large extent, while the acids were inhibited for the PKS:MAH:IRO-1:1:1 pyrolysis blend. However, the relative yield of the saccharides was inhibited to a large extent for the PKS:MAH:IRO-1:2:2 pyrolysis blend, while no major difference was observed in the yields across the different groups of compounds when PKS and the woody biomass were blended in equal amounts and pyrolysed (PKS:MAH:IRO-2:1:1). This study showed evidence of a synergistic interaction when co-pyrolysing different biomasses. It also shows that it is possible to enhance the production of a valuable group of compounds with the right biomass composition and blend ratio.

| S-EPMC10574147 | biostudies-literature

Microwave-assisted conversion of palm kernel shell biomass waste to photoluminescent carbon dots.

Project description:In the present work, palm kernel shell (PKS) biomass waste has been used as a low-cost and easily available precursor to prepare carbon dots (CDs) via microwave irradiation method. The impacts of the reacting medium: water and diethylene glycol (DEG), and irradiation period, as well as the presence of chitosan on the CDs properties, have been investigated. The synthesized CDs were characterized by several physical and optical analyses. The performance of the CDs in terms of bacteria cell imaging and copper (II) ions sensing and removal were also explored. All the CDs possessed a size of 6-7 nm in diameter and the presence of hydroxyl and alkene functional groups indicated the successful transformation of PKS into CDs with carbon core consisting of C = C elementary unit. The highest quantum yield (44.0%) obtained was from the CDs synthesised with DEG as the reacting medium at irradiation period of 1 min. It was postulated that the high boiling point of DEG resulted in a complete carbonisation of PKS into CDs. Subsequently, the absorbance intensity and photoluminescence intensity were also much higher compared to other precursor formulation. All the CDs fluoresced in the bacteria culture, and fluorescence quenching occurred in the presence of heavy metal ions. These showed the potential of CDs synthesised from PKS could be used for cellular imaging and detection as well as removal of heavy metal ions.

| S-EPMC7712893 | biostudies-literature

Dataset on leaf surface and elemental study of four species of Bignoniaceae family by SEM-EDAX.

Project description:The data presented in this article are related to the scanning electron microscope and elemental studies in the four species of Bignoniaceae namely Tecoma gaudichaudi DC (Sample 1), Tecoma capensis (Thunb.) Lindl. (Sample 2), Tecoma stans (L.) Juss.Ex Kunth (Sample 3), Tabebuia rosea (Bertol.) (Sample 4). The SEM images were obtained for permanent record. The abaxial and adaxial surfaces of each species were carefully studied. In addition to this, the consistent occurrence of anomocytic stomata in all four species of this family shows that morphological and taxonomically all the species are very close and intimate. The elemental data on leaf samples of all four species were performed and total eight important components were present such as C, O, Mg, Al, Si, Cl, K, Ca. These elements are useful, so identification of inorganic components of these species defiantly helps to promote as dietary elements.

| S-EPMC5988445 | biostudies-literature

Palm Kernel Shell Activated Carbon as an Inorganic Framework for Shape-Stabilized Phase Change Material.

Project description:The preparation of activated carbon using palm kernel shells as the precursor (PKSAC) was successfully accomplished after the parametric optimization of the carbonization temperature, carbonization holding time, and the ratio of the activator (H₃PO₄) to the precursor. Optimization at 500 °C for 2 h of carbonization with 20% H₃PO₄ resulted in the highest surface area of the activated carbon (C20) of 1169 m² g-1 and, with an average pore size of 27 Å. Subsequently, the preparation of shape-stabilized phase change material (SSPCM-C20) was done by the encapsulation of n-octadecane into the pores of the PKSAC, C20. The field emission scanning electron microscope images and the nitrogen gas adsorption-desorption isotherms show that n-octadecane was successfully encapsulated into the pores of C20. The resulting SSPCM-C20 nano-composite shows good thermal reliability which is chemically and thermally stable and can stand up to 500 melting and freezing cycles. This research work provided a new strategy for the preparation of SSPCM material for thermal energy storage application generated from oil palm waste.

| S-EPMC6165392 | biostudies-literature

Experimental data on the properties of pelletization of palm kernel shell using sago starch and sodium acetate.

Project description:Pellet mixed with 5 wt% and 10 wt% of binders was tested. The pelleting process was performed using a pellet mill operated at 100 °C and at 50 MPa. The physical and chemical characteristics including hardness, high heating value and proximate analysis of pellet produces were obtained using durometer and through thermographic analysis and the results were reported in this paper. Bulk and unit density were determined according to ASABE standard. The dataset presented here are the data of palm kernel shell pellet prepared using two types of binder; (1) sago starch and (2) sodium acetate. The pelletization of palm kernel shell aimed to increase the density and strength of the palm kernel shell pellet and consequently provide better thermal degradation characteristics.

| S-EPMC8129651 | biostudies-literature

Core–shell silica@CuxZnAl LDH catalysts for efficient CO2 hydrogenation to methanol† † Electronic supplementary information (ESI) available: XRD, SEM, TEM, FTIR, TGA, BET, EXAFS fitting, ICP-MS and elemental analysis. See DOI: https://doi.org/10.1039/d3sc02205f

Project description: Not available

| S-EPMC10510760 | biostudies-literature

Microscopical and elemental FESEM and Phenom ProX-SEM-EDS analysis of osteocyte- and blood vessel-like microstructures obtained from fossil vertebrates of the Eocene Messel Pit, Germany.

Project description:The Eocene (∾48 Ma) Messel Pit in Germany is a UNESCO World Heritage Site because of its exceptionally preserved fossils, including vertebrates, invertebrates, and plants. Messel fossil vertebrates are typically characterized by their articulated state, and in some cases the skin, hair, feathers, scales and stomach contents are also preserved. Despite the exceptional macroscopic preservation of Messel fossil vertebrates, the microstructural aspect of these fossils has been poorly explored. In particular, soft tissue structures such as hair or feathers have not been chemically analyzed, nor have bone microstructures. I report here the preservation and recovery of osteocyte-like and blood vessel-like microstructures from the bone of Messel Pit specimens, including the turtles Allaeochelys crassesculpta and Neochelys franzeni, the crocodile Diplocynodon darwini, and the pangolin Eomanis krebsi. I used a Field Emission Scanning Electron Microscope (FESEM) and a Phenom ProX desktop scanning electron microscope (LOT-QuantumDesign) equipped with a thermionic CeB6 source and a high sensitivity multi-mode backscatter electron (BSE) for microscopical and elemental characterization of these bone microstructures. Osteocyte-like and blood vessel-like microstructures are constituted by a thin layer (∾50 nm thickness), external and internal mottled texture with slightly marked striations. Circular to linear marks are common on the external surface of the osteocyte-like microstructures and are interpreted as microbial troughs. Iron (Fe) is the most abundant element found in the osteocyte-like and blood vessel-like microstructures, but not in the bone matrix or collagen fibril-like microstructures. The occurrence of well-preserved soft-tissue elements (at least their physical form) establishes a promising background for future studies on preservation of biomolecules (proteins or DNA) in Messel Pit fossils.

| S-EPMC4727973 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data