Dataset Information

Bactericidal ZnO glass-filled thermoplastic polyurethane and polydimethyl siloxane composites to inhibit biofilm-associated infections.

ABSTRACT: This study investigates a novel approach to controlling biofilms of the most frequent pathogens implicated in the etiology of biomaterials-associated infections. New bactericidal filler based on a non-toxic glass, belonging to B₂O₃-SiO₂-Al₂O₃-Na₂O-ZnO system, was used to formulate composites of the most widely used polymers in biomedical applications [i.e. thermoplastic polyurethane (TPU) and polydimethyl siloxane (PDMS)], with varying percentage by weight of the bactericidal glass (5, 15, 25, 35, 50%). Glass-filled polymer composites show dramatically restricted bacterial colonisation and biofilm formation. They exhibit time- and dose-dependent killing, with maximal action at 5 days. The highest activity was found against S.epidermidis biofilm (99% of reduction), one of the most common cause of nosocomial infections. The tensile properties of the obtained glass-filled composites are comparable with the literature data concerning polymeric biomaterials for medical implants and devices. In addition, all the materials presented in this research, revealed an excellent biocompatibility. This was disclosed by cell viability values above 70%, none alteration on erythrocyte membrane or cell functionality in contact with materials (haemolytic index 0-2%), and absence of interferences in blood coagulation (intrinsic, extrinsic and final pathways).

SUBMITTER: Cabal B

PROVIDER: S-EPMC6391378 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Bactericidal ZnO glass-filled thermoplastic polyurethane and polydimethyl siloxane composites to inhibit biofilm-associated infections.

Cabal Belén B Sevillano David D Fernández-García Elisa E Alou Luis L Suárez Marta M González Natalia N Moya José S JS Torrecillas Ramón R

Scientific reports 20190226 1

This study investigates a novel approach to controlling biofilms of the most frequent pathogens implicated in the etiology of biomaterials-associated infections. New bactericidal filler based on a non-toxic glass, belonging to B2O3-SiO2-Al2O3-Na2O-ZnO system, was used to formulate composites of the most widely used polymers in biomedical applications [i.e. thermoplastic polyurethane (TPU) and polydimethyl siloxane (PDMS)], with va ...[more]

PMID: 30808968

Similar Datasets

Project description:The design and development of thermal insulation materials is very important for the treatment of offshore oil pipelines. Understanding thermal energy transport in thermal insulation materials and predicting their thermal conductivities have important theoretical and practical value for the design of thermal insulation materials. In this work, lightweight and thermally insulated (LWTI) composites with the desired mechanical strength for offshore oil pipelines applications were prepared using epoxy resin (EP) as the matrix and hollow glass microspheres (HGMs) as the filler. The morphology, density, and mechanical properties of HGM/EP LWTI composites were studied first. The flexural strength and the flexural modulus of HGM/EP LWTI composites could still be as high as 22.34 ± 2.75 Mpa and 1.34 ± 0.03 GPa, respectively, while the density was only 0.591 g/cm3. The relationship between the effective thermal conductivity of HGM/EP LWTI composites and material parameters (sizes and contents together) has been studied systematically. A three-phase prediction model was built using the self-consistent approximation method to predict the effective thermal conductivity of HGM/EP LWTI composites, and the resin matrix, the wall thickness, the HGM particle size, and other parameters (such as air) were fully considered during the derivation of this three-phase thermal conductivity model. Finally, the insulation mechanism of HGM/EP LWTI composites was systematically analyzed. The thermal conductivities of HGM/EP LWTI composites with different diameters and HGM contents calculated by the three-phase prediction model agreed well with the experimental test results, with a minimum error of only 0.69%. Thus, this three-phase thermal conductivity model can be used to theoretically simulate the thermal conductivity of epoxy resin-based LWTI composites and can be the theoretical basis for the design and prediction of the thermal conductivity of other similar hollow spheres filled materials.

Dataset Information

Bactericidal ZnO glass-filled thermoplastic polyurethane and polydimethyl siloxane composites to inhibit biofilm-associated infections.

Publications

Bactericidal ZnO glass-filled thermoplastic polyurethane and polydimethyl siloxane composites to inhibit biofilm-associated infections.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets