Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Immobilization of proteolytic enzymes on replica-molded thiol-ene micropillar reactors via thiol-gold interaction.

ABSTRACT: We introduce rapid replica molding of ordered, high-aspect-ratio, thiol-ene micropillar arrays for implementation of microfluidic immobilized enzyme reactors (IMERs). By exploiting the abundance of free surface thiols of off-stoichiometric thiol-ene compositions, we were able to functionalize the native thiol-ene micropillars with gold nanoparticles (GNPs) and these with proteolytic α-chymotrypsin (CHT) via thiol-gold interaction. The micropillar arrays were replicated via PDMS soft lithography, which facilitated thiol-ene curing without the photoinitiators, and thus straightforward bonding and good control over the surface chemistry (number of free surface thiols). The specificity of thiol-gold interaction was demonstrated over allyl-rich thiol-ene surfaces and the robustness of the CHT-IMERs at different flow rates and reaction temperatures using bradykinin hydrolysis as the model reaction. The product conversion rate was shown to increase as a function of decreasing flow rate (increasing residence time) and upon heating of the IMER to physiological temperature. Owing to the effective enzyme immobilization onto the micropillar array by GNPs, no further purification of the reaction solution was required prior to mass spectrometric detection of the bradykinin hydrolysis products and no clogging problems, commonly associated with conventional capillary packings, were observed. The activity of the IMER remained stable for at least 1.5 h (continuous use), suggesting that the developed protocol may provide a robust, new approach to implementation of IMER technology for proteomics research. Graphical abstract.

SUBMITTER: Tahka S

PROVIDER: S-EPMC6459972 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

"Grafting to" of RAFTed Responsive Polymers to Glass Substrates by Thiol-Ene and Critical Comparison to Thiol-Gold Coupling.

Project description:Surface-grafted polymers have been widely applied to modulate biological interfaces and introduce additional functionality. Polymers derived from reversible addition-fragmentation transfer (RAFT) polymerization have a masked thiol at the ?-chain end providing an anchor point for conjugation and in particular displays high affinity for gold surfaces (both flat and particulate). In this work, we report the direct grafting of RAFTed polymers by a "thiol-ene click" (Michael addition) onto glass substrates rather than gold, which provides a more versatile surface for subsequent array-based applications but retains the simplicity. The immobilization of two thermoresponsive polymers are studied here, poly[oligo(ethylene glycol) methyl ether methacrylate] (pOEGMA) and poly(N-isopropylacrylamide) (pNIPAM). Using a range of surface analysis techniques the grafting efficiency was compared to thiol-gold and was quantitatively compared to the gold alternative using quartz crystal microbalance. It is shown that this method gives easy access to grafted polymer surfaces with pNIPAM resulting in significantly increased surface coverage compared to pOEGMA. The nonfouling (protein resistance) character of these surfaces is also demonstrated.

| S-EPMC4979048 | biostudies-literature

Mechano-Triboelectric Analysis of Surface Charge Generation on Replica-Molded Elastomeric Nanodomes.

Project description:Replica molding-based triboelectrification has emerged as a new and facile technique to generate nanopatterned tribocharge on elastomer surfaces. The "mechano-triboelectric charging model" has been developed to explain the mechanism of the charge formation and patterning process. However, this model has not been validated to cover the full variety of nanotexture shapes. Moreover, the experimental estimation of the tribocharge's surface density is still challenging due to the thick and insulating nature of the elastomeric substrate. In this work, we perform experiments in combination with numerical analysis to complete the mechano-triboelectrification charging model. By utilizing Kelvin probe force microscopy (KPFM) and finite element analysis, we reveal that the mechano-triboelectric charging model works for replica molding of both recessed and protruding nanotextures. In addition, by combining KPFM with numerical electrostatic modeling, we improve the accuracy of the surface charge density estimation and cross-calibrate the result against that of electrostatic force microscopy. Overall, the regions which underwent strong interfacial friction during the replica molding exhibited high surface potential and charge density, while those suffering from weak interfacial friction exhibited low values on both. These multi-physical approaches provide useful and important tools for comprehensive analysis of triboelectrification and generation of nanopatterned tribocharge. The results will widen our fundamental understanding of nanoscale triboelectricity and advance the nanopatterned charge generation process for future applications.

| S-EPMC8705332 | biostudies-literature

Photopatterned thiol surfaces for biomolecule immobilization.

Project description:The ability to pattern small molecules and proteins on artificial surfaces is of importance for the development of new tools including tissue engineering, cell-based drug screening, and cell-based sensors. We describe here a novel "caged" thiol-mediated strategy for the fabrication of planar substrates patterned with biomolecules using photolithography. A thiol-bearing phosphoramidite (3-(2'-nitrobenzyl)thiopropyl (NBTP) phosphoramidite) was synthesized and coupled to a hydroxyl-terminated amorphous carbon substrate. A biocompatible oligo(ethylene glycol) spacer was used to resist nonspecific adsorption of protein and DNA and enhance flexibility of attached biomolecules. Thiol functionalities are revealed by UV irradiation of NBTP-modified surfaces. Both the surface coupling and photodeprotection were monitored by Polarization Modulation Fourier Transform Infrared Reflection Absorption Spectroscopy (PM-FTIRRAS) and X-ray Photoelectron Spectroscopy (XPS) measurements. The newly exposed thiols are chemically very active and react readily with a wide variety of groups. A series of molecules including biotin, DNA, and proteins were attached to the surfaces with retention of their biological activities, demonstrating the utility and generality of the approach.

| S-EPMC2768491 | biostudies-literature

Functional graphene by thiol-ene click chemistry.

Project description:Thiol-ene click reaction was successfully employed for chemical modification of graphene oxide (GO) by one-step synthesis. Herein, 2,2-azobis(2-methylpropionitrile) (AIBN) was used as thermal catalyst and cysteamine hydrochloride (HS-(CH2 )2 -NH2 HCl) was used as thiol-containing compound, which is incorporated to GO surface upon reaction with the C=C bonds. The hydrochloride acts as protecting group for the amine, which is finally eliminated by adding sodium hydroxide. The modified GO contains both S- and N-containing groups (NS-GO). We found that NS-GO sheets form good dispersion in water, ethanol, and ethylene glycol. These graphene dispersions can be processed into functionalized graphene film. Besides, it was demonstrated that NS-GO was proved to be an excellent host matrix for platinum nanoparticles. The developed method paves a new way for graphene modification and its functional nanocomposites.

| S-EPMC6174942 | biostudies-literature

Microfluidic Reactors for Plasmonic Photocatalysis Using Gold Nanoparticles.

Project description:This work reports a microfluidic reactor that utilizes gold nanoparticles (AuNPs) for the highly efficient photocatalytic degradation of organic pollutants under visible light. The bottom of microchamber has a TiO2 film covering a layer of AuNPs (namely, TiO2/AuNP film) deposited on the F-doped SnO2 (FTO) substrate. The rough surface of FTO helps to increase the surface area and the AuNPs enables the strong absorption of visible light to excite electron/hole pairs, which are then transferred to the TiO2 film for photodegradation. The TiO2 film also isolates the AuNPs from the solution to avoid detachment and photocorrosion. Experiments show that the TiO2/AuNP film has a strong absorption over 400-800 nm and enhances the reaction rate constant by 13 times with respect to the bare TiO2 film for the photodegradation of methylene blue. In addition, the TiO2/AuNP microreactor exhibits a negligible reduction of photoactivity after five cycles of repeated tests, which verifies the protective function of the TiO2 layer. This plasmonic photocatalytic microreactor draws the strengths of microfluidics and plasmonics, and may find potential applications in continuous photocatalytic water treatment and photosynthesis. The fabrication of the microreactor uses manual operation and requires no photolithography, making it simple, easy, and of low cost for real laboratory and field tests.

| S-EPMC6952777 | biostudies-literature

Radical-Mediated Thiol-Ene Strategy: Photoactivation of Thiol-Containing Drugs in Cancer Cells.

Project description:Photoactivated drugs provide an opportunity to improve efficacy alongside reducing side-effects in the treatment of severe diseases such as cancer. Described herein is a photoactivation decaging method of isobutylene-caged thiols through a UV-initiated thiol-ene reaction. The method was demonstrated with an isobutylene-caged cysteine, cyclic disulfide-peptide, and thiol-containing drug, all of which were rapidly and efficiently released under mild UV irradiation in the presence of thiol sources and a photoinitiator. Importantly, it is shown that the activity of histone deacetylase inhibitor largazole can be switched off when stapled, but selectively switched on within cancer cells when irradiated with non-phototoxic light.

| S-EPMC6391964 | biostudies-literature

Investigations of thiol-modified phenol derivatives for the use in thiol-ene photopolymerizations.

Project description:Thiol-ene photopolymerizations gain a growing interest in academic research. Coatings and dental restoratives are interesting applications for thiol-ene photopolymerizations due to their unique features. In most studies the relative flexible and hydrophilic ester derivative, namely pentaerythritoltetra(3-mercaptopropionate) (PETMP), is investigated as the thiol component. Thus, in the present study we are encouraged to investigate the performance of more hydrophobic ester-free thiol-modified bis- and trisphenol derivatives in thiol-ene photopolymerizations. For this, six different thiol-modified bis- and trisphenol derivatives exhibiting four to six thiol groups are synthesized via the radical addition of thioacetic acid to suitable allyl-modified precursors and subsequent hydrolysis. Compared to PETMP better flexural strength and modulus of elasticity are achievable in thiol-ene photopolymerizations employing 1,3,5-triallyl-1,3,5-triazine-2,4,6-trione (TATATO) as the ene derivative. Especially, after storage in water, the flexural strength and modulus of elasticity is twice as high compared to the PETMP reference system.

| S-EPMC4142978 | biostudies-literature

Oxygen-Mediated Enzymatic Polymerization of Thiol-Ene Hydrogels.

Project description:Materials that solidify in response to an initiation stimulus are currently utilized in several biomedical and surgical applications; however, their clinical adoption would be more widespread with improved physical properties and biocompatibility. One chemistry that is particularly promising is based on the thiol-ene addition reaction, a radical-mediated step-growth polymerization that is resistant to oxygen inhibition and thus is an excellent candidate for materials that polymerize upon exposure to aerobic conditions. Here, thiol-ene-based hydrogels are polymerized by exposing aqueous solutions of multi-functional thiol and allyl ether PEG monomers, in combination with enzymatic radical initiating systems, to air. An initiating system based on glucose oxidase, glucose, and Fe2+ is initially investigated where, in the presence of glucose, the glucose oxidase reduces oxygen to hydrogen peroxide which is then further reduced by Fe2+ to yield hydroxyl radicals capable of initiating thiol-ene polymerization. While this system is shown to effectively initiate polymerization after exposure to oxygen, the polymerization rate does not monotonically increase with raised Fe2+ concentration owing to inhibitory reactions that retard polymerization at higher Fe2+ concentrations. Conversely, replacing the Fe2+ with horseradish peroxidase affords an initiating system is that is not subject to the iron-mediated inhibitory reactions and enables increased polymerization rates to be attained.

| S-EPMC4074923 | biostudies-literature

Thiol-ene enabled detection of thiophosphorylated kinase substrates.

Project description:Protein phosphorylation is a ubiquitous posttranslational modification that regulates cell signaling in both prokaryotes and eukaryotes. Although the study of phosphorylation has made great progress, several major hurdles remain, including the difficulty of the assignment of endogenous substrates to a discrete kinase and of global phosphoproteomics investigations. We have developed a novel chemical strategy for detecting phosphorylated proteins. This method utilizes adenosine 5'-O-(3-thiotriphosphate) (ATP?S), which results in the transfer of a thiophosphate moiety by a kinase to its substrate(s). This group can subsequently be employed as a nucleophilic handle to promote protein detection. To selectively label thiophosphorylated proteins, cellular thiols (e.g., cysteine-containing proteins) must first be blocked. Most common cysteine-capping strategies rely upon the nucleophilicity of the sulfur group and would therefore also modify the thiophosphate moiety. We hypothesized that the radical-mediated thiol-ene reaction, however, would be selective for cysteine over thiophosphorylated amino acids due to the differences in the electronics and pKa values between these groups. Here, we report rapid and specific tagging of thiophosphorylated proteins in vitro following chemoselective thiol capping using the thiol-ene reaction.

| S-EPMC3745782 | biostudies-literature

Hybrid Organic/Inorganic Thiol-ene-Based Photopolymerized Networks.

Project description:The thiol-ene reaction serves as a more oxygen tolerant alternative to traditional (meth)acrylate chemistry for forming photopolymerized networks with numerous desirable attributes including energy absorption, optical clarity, and reduced shrinkage stress. However, when utilizing commercially available monomers, many thiol-ene networks also exhibit decreases in properties such as glass transition temperature (T(g)) and crosslink density. In this study, hybrid organic/inorganic thiol-ene resins incorporating silsesquioxane (SSQ) species into the photopolymerized networks were investigated as a route to improve these properties. Thiol- and ene-functionalized SSQs (SH-SSQ and allyl-SSQ, respectively) were synthesized via alkoxysilane hydrolysis/condensation chemistry, using a photopolymerizable monomer [either pentaerythriol tetrakis(3-mercaptopropionate) (PETMP) or 1,3,5-triallyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TATATO)] as the reaction solvent. The resulting SSQ-containing solutions (SSQ-PETMP and SSQ-TATATO) were characterized, and their incorporation into photopolymerized networks was evaluated.

| S-EPMC3185307 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data