Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Highly Flexible, Stretchable, and Tunable Optical Diffusers with Mechanically Switchable Wettability Surfaces.

ABSTRACT: Highly stretchable and super-hydrophobic photonics provides a new geometric degree of freedom for photonic system design and self-cleaning applications. Here, we describe the design and experimental realization of mechanically stretchable and tunable photonic diffusers. These intrinsically designed diffusers (based on periodic arrays of cylindrical lenslets and microtip) were made directly on elastomer material using laser ablation. The dimensions of both the tips and the lenslet arrays play a critical role in the distribution of illumination and wettability resistance. By stretching the diffusers mechanically along the lenslet arrays, diffusion angle tuning was achieved and also a reversible change between hydrophilic to super-hydrophobic states. These multifunctional diffusers constitute an important step toward integration with flexible materials or devices such as stretchable organic light-emitting diodes and polymer light-emitting diodes.

SUBMITTER: Alqurashi T

PROVIDER: S-EPMC6598385 | biostudies-literature | 2019 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Highly Flexible, Stretchable, and Tunable Optical Diffusers with Mechanically Switchable Wettability Surfaces.

Alqurashi Tawfiq T Butt Haider H

ACS central science 20190524 6

Highly stretchable and super-hydrophobic photonics provides a new geometric degree of freedom for photonic system design and self-cleaning applications. Here, we describe the design and experimental realization of mechanically stretchable and tunable photonic diffusers. These intrinsically designed diffusers (based on periodic arrays of cylindrical lenslets and microtip) were made directly on elastomer material using laser ablation. The dimensions of both the tips and the lenslet arrays play a c ...[more]

PMID: 31263759

Similar Datasets

Stretchable Ag electrodes with mechanically tunable optical transmittance on wavy-patterned PDMS substrates.

Project description:We report on semi-transparent stretchable Ag films coated on a wavy-patterned polydimethylsiloxane (PDMS) substrate for use as stretchable electrodes for stretchable and transparent electronics. To improve the mechanical stretchability of the Ag films, we optimized the wavy-pattern of the PDMS substrate as a function of UV-ozone treatment time and pre-strain of the PDMS substrate. In addition, we investigated the effect of the Ag thickness on the mechanical stretchability of the Ag electrode formed on the wavy-patterned PDMS substrate. The semi-transparent Ag films formed on the wavy-patterned PDMS substrate showed better stretchability (strain 20%) than the Ag films formed on a flat PDMS substrate because the wavy pattern effectively relieved strain. In addition, the optical transmittance of the Ag electrode on the wavy-patterned PDMS substrate was tunable based on the degree of stretching for the PDMS substrate. In particular, it was found that the wavy-patterned PDMS with a smooth buckling was beneficial for a precise patterning of Ag interconnectors. Furthermore, we demonstrated the feasibility of semi-transparent Ag films on wavy-patterned PDMS as stretchable electrodes for the stretchable electronics based on bending tests, hysteresis tests, and dynamic fatigue tests.

| S-EPMC5402286 | biostudies-literature

Flexible and stretchable micromagnet arrays for tunable biointerfacing.

Project description:A process to surface pattern polydimethylsiloxane (PDMS) with ferromagnetic structures of varying sizes (micrometer to millimeter) and thicknesses (>70 ?m) is developed. Their flexibility and magnetic reach are utilized to confer dynamic, additive properties to a variety of substrates, such as coverslips and Eppendorf tubes. It is found that these substrates can generate additional modes of magnetic droplet manipulation, and can tunably steer magnetic-cell organization.

| S-EPMC4416700 | biostudies-literature

Highly Stretchable, Strain Sensing Hydrogel Optical Fibers.

Project description:A core-clad fiber made of elastic, tough hydrogels is highly stretchable while guiding light. Fluorescent dyes are easily doped into the hydrogel fiber by diffusion. When stretched, the transmission spectrum of the fiber is altered, enabling the strain to be measured and also its location.

| S-EPMC5148684 | biostudies-literature

Development of Hybrid Surfaces with Tunable Wettability by Selective Surface Modifications.

Project description:Recent advances in micro/nano technology have driven artificial modifications of surface wettability by mimicking biological surfaces, such as superhydrophobic and water-harvesting surfaces. In this study, surface wettability of polycarbonate (PC) films was modified using various surface treatments: micropatterning using ultrasonic imprint lithography, fluorinate silane coating, and electron beam irradiation. To modify surface wettability selectively in a specified region, these three treatments were performed using profiled masks with the corresponding shapes. Various combinations of these treatments were investigated in terms of wettability changes, by measuring contact angle (CA). The semi-hydrophobic PC film (CA: 89.2°) was modified to create a super- hydrophobic state (CA: 155.9°) by virtue of the selective micropatterning and coating. The electron beam irradiation had an opposite effect, reducing the CA (48.2°), so that the irradiated region was modified to create a hydrophilic state. Two combinations of the proposed surface modifications made it possible to have a great difference in CA on a single surface (107.7°), and to have four different wetting states on a single surface. Various water-drop experiments proved that the developed hybrid surfaces were selectively wettable and showed water-collecting capability.

| S-EPMC5456690 | biostudies-other

Tunable Optical Diffusers Based on the UV/Ozone-Assisted Self-Wrinkling of Thermal-Cured Polymer Films.

Project description:Tunable optical diffusers have attracted attention because of the rapid development of next generation stretchable optoelectronics and optomechanics applications. Flexible wrinkle structures have the potential to change the light path and tune the diffusion capability, which is beneficial to fabricate optical diffusers. The generation of wrinkles usually depends on an external stimulus, thus resulting in complicated fabricating equipment and processes. In this study, a facile and low-cost method is proposed to fabricate wrinkle structures by the self-wrinkling of thermal-cured polymer for tunable optical diffusers. The uncured polydimethylsiloxane (PDMS) precursors were exposed to UV/ozone to obtain hard silica layers and then crosslinked via heating to induce the wrinkle patterns. The wrinkle structures were demonstrated as strain-dependent tunable optical diffusers and the optical diffusion of transmitted light via the deformable wrinkle structures was studied and adjusted. The incident light isotropically diffused through the sample at the initial state. When the wrinkle structures deformed, it showed a more pronounced isotropic optical diffusion with uniaxial tensile strain. The optical diffusion is anisotropical with a further increase in uniaxial tensile strain. The proposed method of fabricating wrinkles by UV/ozone-assisted self-wrinkling of thermal-cured polymer films is simple and cost-effective, and the obtained structures have potential applications in tunable optical diffusers.

| S-EPMC8434521 | biostudies-literature

In Situ Electric-Induced Switchable Transparency and Wettability on Laser-Ablated Bioinspired Paraffin-Impregnated Slippery Surfaces.

Project description:Switchable wetting and optical properties on a surface is synergistically realized by mechanical or temperature stimulus. Unfortunately, in situ controllable wettability together with programmable transparency on 2D/3D surfaces is rarely explored. Herein, Joule-heat-responsive paraffin-impregnated slippery surface (JR-PISS) is reported by the incorporation of lubricant paraffin, superhydrophobic micropillar-arrayed elastomeric membrane, and embedded transparent silver nanowire thin-film heater. Owing to its good flexibility, in situ controllable locomotion for diverse liquids on planar/curved JR-PISS is unfolded by alternately applying/discharging low electric-trigger of 6 V. Simultaneously, optical visibility can be reversibly converted between opaque and transparent modes. The switching principle is that in the presence of Joule-heat, solid paraffin would be melt and swell within 20 s to enable a slippery surface for decreasing light scattering and frictional force derived from contact angle hysteresis (FCAH ). Once Joule-heat is discharged, undulating rough surface would reconfigure by cold-shrinkage of paraffin within 8 s to render light blockage and high FCAH . Upon its portable merit, in situ thermal management, programmable visibility, as well as steering functionalized droplets by electric-activated JR-PISSs are successfully deployed. Compared with previous Nepenthes-inspired slippery surfaces, the current JR-PISS is more competent for in situ harnessing optical and wetting properties on-demand.

| S-EPMC8292917 | biostudies-literature

Femtosecond laser directed fabrication of optical diffusers.

Project description:Optical diffusers are widely used in filament lamps, imaging systems, display technologies, lasers, and Light Emitting Diodes (LEDs). Here, a method for the fabrication of optical diffusers through femtosecond laser machining is demonstrated. Float glass surfaces were ablated with femtosecond laser light to form nanoscale ripples with dimensions comparable to the wavelength of visible light. These structures produce highly efficient and wide field of view diffusers. The machined patterns altered the average surface roughness, with the majority of particles in the range of a few hundred nanometers. The optical diffusion characteristic and a maximum diffusion angle of near 172° was achieved with optimum machining parameters. The transmission performance of the diffusers was measured to be ∼30% across the visible spectrum. The demonstrated technique has potential for producing low-cost large area optical devices. The process benefits from the flexibility of the laser writing method and enables the production of custom optical diffusers.

| S-EPMC6112377 | biostudies-literature

Forming Spacers in Situ by Photolithography to Mechanically Stabilize Electrofluidic-Based Switchable Optical Elements.

Project description:Electro-Fluidic Displays (EFD) have been demonstrated to be an attractive technology for incorporation into portable display devices. EFDs have excellent optical efficiency and fast switching enabling video content. Ensuring mechanical stability of EFD display cells is a key challenge and essential for developing large area as well as flexible displays. Although the electro-optic performance of an EFD, unlike a liquid crystal display (LCD), is insensitive to cell-gap, extreme changes in cell-gap can result in irreversible collapse of the cell. Here we use photolithography to develop spacers to prevent cell-gap collapse and provide the required mechanical stability for EFD devices. The spacer is formed directly on the cover plates (ITO/glass) after cell assembly with UV light induced phase separation polymerization in the illuminated area. Phase separation behavior between polar aqueous solution and polymer is closely related to the solubility of acrylate monomers. In this work, polyethylene glycol diacrylate (PEGDA) as cross-linker, 2-hydroxyethyl acrylate (HEA) and acrylic acid or acrylamide as co-monomers are investigated for fabricating the spacers. PEGDA was added to the mixtures in order to increase the mechanical strength of the spacer. The spacers showed excellent performance for cell-gap control in EFD devices.

| S-EPMC5502914 | biostudies-other

Transfer of assembled collagen fibrils to flexible substrates for mechanically tunable contact guidance cues.

Project description:Contact guidance or bidirectional migration along aligned fibers modulates many physiological and pathological processes such as wound healing and cancer invasion. Aligned 2D collagen fibrils epitaxially grown on mica substrates replicate many features of contact guidance seen in aligned 3D collagen fiber networks. However, these 2D collagen self-assembled substrates are difficult to image through, do not have known or tunable mechanical properties and cells degrade and mechanically detach collagen fibrils from the surface, leading to an inability to assess contact guidance over long times. Here, we describe the transfer of aligned collagen fibrils from mica substrates to three different functionalized target substrates: glass, polydimethylsiloxane (PDMS) and polyacrylamide (PA). Aligned collagen fibrils can be efficiently transferred to all three substrates. This transfer resulted in substrates that were to varying degrees resistant to cell-mediated collagen fibril deformation that resulted in detachment of the collagen fibril field, allowing for contact guidance to be observed over longer time periods. On these transferred substrates, cell speed is lowest on softer contact guidance cues for both MDA-MB-231 and MTLn3 cells. Intermediate stiffness resulted in the fastest migration. MTLn3 cell directionality was low on soft contact guidance cues, whereas MDA-MB-231 cell directionality marginally increased. It appears that the stiffness of the contact guidance cue regulates contact guidance differently between cell types. The development of this collagen fibril transfer method allows for the attachment of aligned collagen fibrils on substrates, particularly flexible substrates, that do not normally promote aligned collagen fibril growth, increasing the utility of this collagen self-assembly system for the fundamental examination of mechanical regulation of contact guidance.

| S-EPMC6267882 | biostudies-literature

Highly Porous Yet Transparent Mechanically Flexible Aerogels Realizing Solar-Thermal Regulatory Cooling.

Project description:The demand for highly porous yet transparent aerogels with mechanical flexibility and solar-thermal dual-regulation for energy-saving windows is significant but challenging. Herein, a delaminated aerogel film (DAF) is fabricated through filtration-induced delaminated gelation and ambient drying. The delaminated gelation process involves the assembly of fluorinated cellulose nanofiber (FCNF) at the solid-liquid interface between the filter and the filtrate during filtration, resulting in the formation of lamellar FCNF hydrogels with strong intra-plane and weak interlayer hydrogen bonding. By exchanging the solvents from water to hexane, the hydrogen bonding in the FCNF hydrogel is further enhanced, enabling the formation of the DAF with intra-layer mesopores upon ambient drying. The resulting aerogel film is lightweight and ultra-flexible, which possesses desirable properties of high visible-light transmittance (91.0%), low thermal conductivity (33 mW m-1 K-1), and high atmospheric-window emissivity (90.1%). Furthermore, the DAF exhibits reduced surface energy and exceptional hydrophobicity due to the presence of fluorine-containing groups, enhancing its durability and UV resistance. Consequently, the DAF has demonstrated its potential as solar-thermal regulatory cooling window materials capable of simultaneously providing indoor lighting, thermal insulation, and daytime radiative cooling under direct sunlight. Significantly, the enclosed space protected by the DAF exhibits a temperature reduction of 2.6 °C compared to that shielded by conventional architectural glass.

| S-EPMC10897091 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data