Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Liquid-Phase Monolayer Doping of InGaAs with Si-, S-, and Sn-Containing Organic Molecular Layers.

ABSTRACT: The functionalization and subsequent monolayer doping of InGaAs substrates using a tin-containing molecule and a compound containing both silicon and sulfur was investigated. Epitaxial InGaAs layers were grown on semi-insulating InP wafers and functionalized with both sulfur and silicon using mercaptopropyltriethoxysilane and with tin using allyltributylstannane. The functionalized surfaces were characterized using X-ray photoelectron spectroscopy (XPS). The surfaces were capped and subjected to rapid thermal annealing to cause in-diffusion of dopant atoms. Dopant diffusion was monitored using secondary ion mass spectrometry. Raman scattering was utilized to nondestructively determine the presence of dopant atoms, prior to destructive analysis, by comparison to a blank undoped sample. Additionally, due to the As-dominant surface chemistry, the resistance of the functionalized surfaces to oxidation in ambient conditions over periods of 24 h and 1 week was elucidated using XPS by monitoring the As 3d core level for the presence of oxide components.

SUBMITTER: O'Connell J

PROVIDER: S-EPMC6640969 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Investigation of Boron Distribution at the SiO2/Si Interface of Monolayer Doping.

Project description:Monolayer doping is a possible method for achieving complex-geometry structures with different semiconductors. Understanding the dopant diffusion behavior of monolayer doping, especially under different heating sources, is essential for further improvement. We examine and compare the doping profile and dopant activation with two different heating sources (rapid thermal annealing and microwave annealing), especially focused on SiO2/Si interface. These heating sources are used for junction diode fabrication, to realize current switching behavior. Direct observations of monolayer doping profiles, especially inside the capping oxide, are discussed to provide quantitative information for dopant concentration. This can provide significant information for better tuning of surface chemistries and process protocols applied in monolayer doping methodologies.

| S-EPMC7807803 | biostudies-literature

Synthesis of nanocrystals by discharges in liquid nitrogen from Si-Sn sintered electrode.

Project description:The synthesis feasibility of silicon-tin nanocrystals by discharges in liquid nitrogen is studied using a Si-10 at % Sn sintered electrode. Time-resolved optical emission spectroscopy shows that silicon and tin melt almost simultaneously. The presence of both vapours does not lead to the synthesis of alloyed nanocrystals but to the synthesis of separate nanocrystals of silicon and tin with average sizes of 10 nm. These nanocrystals are transformed into amorphous silicon oxide (am-SiO2) and β-SnO2 by air oxidation, after evaporation of the liquid nitrogen. The synthesis of an am-Si0.95Sn0.05 phase around large silicon crystals (~500 nm) decorated by β-Sn spheroids is achieved if the current flowing through electrodes is high enough. When the sintered electrode is hit by powerful discharges, some grains are heated and tin diffuses in the large silicon crystals. Next, these grains are shelled and fall into the dielectric liquid.

| S-EPMC4664926 | biostudies-literature

Doping nanoparticles using pulsed laser ablation in a liquid containing the doping agent.

Project description:While doping of semiconductors or oxides is crucial for numerous technological applications, its control remains difficult especially when the material is reduced down to the nanometric scale. In this paper, we show that pulsed laser ablation of an undoped solid target in an aqueous solution containing activator ions offers a new way to synthesise doped-nanoparticles. The doping efficiency is evaluated for laser ablation of an undoped Gd2O3 target in aqueous solutions of EuCl3 with molar concentration from 10-5 mol L-1 to 10-3 mol L-1. Thanks to luminescence experiments, we show that the europium ions penetrate the core of the synthesised monoclinic Gd2O3 nanoparticles. We also show that the concentration of the activators in the nanoparticles is proportional to the initial concentration in europium ions in the aqueous solution, and a doping of about 1% ([Eu]/[Gd] atomic ratio) is reached. On the one hand, this work could open new ways for the synthesis of doped nanomaterials. On the other hand, it also raises the question of undesired penetration of impurities in laser-generated nanoparticles in liquids.

| S-EPMC9419851 | biostudies-literature

Hidden phase in a two-dimensional Sn layer stabilized by modulation hole doping.

Project description:Semiconductor surfaces and ultrathin interfaces exhibit an interesting variety of two-dimensional quantum matter phases, such as charge density waves, spin density waves and superconducting condensates. Yet, the electronic properties of these broken symmetry phases are extremely difficult to control due to the inherent difficulty of doping a strictly two-dimensional material without introducing chemical disorder. Here we successfully exploit a modulation doping scheme to uncover, in conjunction with a scanning tunnelling microscope tip-assist, a hidden equilibrium phase in a hole-doped bilayer of Sn on Si(111). This new phase is intrinsically phase separated into insulating domains with polar and nonpolar symmetries. Its formation involves a spontaneous symmetry breaking process that appears to be electronically driven, notwithstanding the lack of metallicity in this system. This modulation doping approach allows access to novel phases of matter, promising new avenues for exploring competing quantum matter phases on a silicon platform.

| S-EPMC5343494 | biostudies-literature

Liquid-liquid phase separation of freely falling undercooled ternary Fe-Cu-Sn alloy.

Project description:The active modulation and control of the liquid phase separation for high-temperature metallic systems are still challenging the development of advanced immiscible alloys. Here we present an attempt to manipulate the dynamic process of liquid-liquid phase separation for ternary Fe47.5Cu47.5Sn5 alloy. It was firstly dispersed into numerous droplets with 66 ~ 810 μm diameters and then highly undercooled and rapidly solidified under the containerless microgravity condition inside drop tube. 3-D phase field simulation was performed to explore the kinetic evolution of liquid phase separation. Through regulating the combined effects of undercooling level, phase separation time and Marangoni migration, three types of separation patterns were yielded: monotectic cell, core shell and dispersive structures. The two-layer core-shell morphology proved to be the most stable separation configuration owing to its lowest chemical potential. Whereas the monotectic cell and dispersive microstructures were both thermodynamically metastable transition states because of their highly active energy. The Sn solute partition profiles of Fe-rich core and Cu-rich shell in core-shell structures varied only slightly with cooling rate.

| S-EPMC4639789 | biostudies-other

Effect of Sn doping concentration on the oxidation of Al-containing MAX phase (Ti3AlC2) combining simulation with experiment.

Project description:Sn doping is usually adopted to prepare Ti3AlC2 in mass production because it can reduce the synthesis temperature while increasing the phase purity. However, excessive Sn doping usually deteriorates the oxidation resistance of Ti3AlC2. Therefore, an appropriate Sn doping concentration is a vital issue. In this work, the effect of Sn doping concentration on the oxidation behavior of Ti3AlC2 was systematically investigated by combining theoretical calculations and experimental methods. Density function theory calculations suggest that the oxygen adsorption mechanisms for the (001) surface of Ti3AlC2 with and without Sn doping are similar, and Ti-O bonds are always preferentially formed. The molecular dynamics simulation further indicates that Al atoms have a faster diffusion rate during the oxidation process. Therefore, a continuous Al2O3 layer can form rapidly at high temperature. Nevertheless, when the Sn doping concentration exceeds 10 mol%, the continuity of the Al2O3 layer is destroyed, thereby impairing the oxidation resistance of Ti3AlC2. Furthermore, oxidation experiments verify the above results. The oxidation mechanisms of Ti3AlC2 with different Sn doping concentrations are also proposed.

| S-EPMC11197679 | biostudies-literature

Liquid phase blending of metal-organic frameworks.

Project description:The liquid and glass states of metal-organic frameworks (MOFs) have recently become of interest due to the potential for liquid-phase separations and ion transport, alongside the fundamental nature of the latter as a new, fourth category of melt-quenched glass. Here we show that the MOF liquid state can be blended with another MOF component, resulting in a domain structured MOF glass with a single, tailorable glass transition. Intra-domain connectivity and short range order is confirmed by nuclear magnetic resonance spectroscopy and pair distribution function measurements. The interfacial binding between MOF domains in the glass state is evidenced by electron tomography, and the relationship between domain size and Tg investigated. Nanoindentation experiments are also performed to place this new class of MOF materials into context with organic blends and inorganic alloys.

| S-EPMC6004012 | biostudies-literature

Synthesis of organic liquid crystals containing selectively fluorinated cyclopropanes.

Project description:This paper describes the synthesis of a series of organic liquid crystals (LCs) containing selectively fluorinated cyclopropanes at their termini. The syntheses used difluorocarbene additions to olefin precursors, an approach which proved straightforward such that these liquid crystal candidates could be efficiently prepared. Their physical and thermodynamic properties were evaluated and depending on individual structures, they either displayed positive or negative dielectric anisotropy. The study gives some guidance into effective structure-property relationships for the design of LCs containing selectively fluorinated cyclopropane motifs.

| S-EPMC7176930 | biostudies-literature

Free and bound excitonic effects in Al0.5Ga0.5N/Al0.35Ga0.65N MQWs with different Si-doping levels in the well layers.

Project description:Free exciton (FX) and bound exciton (BX) in Al0.5Ga0.5N/Al0.35Ga0.65N multiple quantum wells (MQWs) with different Si-doping levels in the well layers are investigated by photoluminescence (PL) spectra. Low temperature (10 K) PL spectra identify a large binding energy of 87.4 meV for the BX in undoped sample, and 63.6 meV for the BX in Si-doped (2 × 10(18 ) cm(-3)) sample. They are attributed to O-bound and Si-bound excitons, respectively. The large binding energies of BX are assumed to originate from the strong quantum confinement in the quantum wells, which also leads to a stronger FX PL peak intensity in comparison with BX at 10 K. Si-doping is found to suppress the FX quenching by reducing threading dislocation density (TDD) in the well layers, leading to a significant improvement of IQE from 33.7% to 45%.

| S-EPMC4533523 | biostudies-other

Reaction of BCl3 with H- and Cl-terminated Si(1 0 0) as a pathway for selective, monolayer doping through wet chemistry.

Project description:The reaction of boron trichloride with the H and Cl-terminated Si(100) surfaces was investigated to understand the interaction of this molecule with the surface for designing wet-chemistry based silicon surface doping processes using a carbon- and oxygen-free precursor. The process was followed with X-ray photoelectron spectroscopy (XPS). Within the reaction conditions investigated, the reaction is highly effective on Cl-Si(100) for temperatures below 70°C, at which point both surfaces react with BCl3. The XPS investigation followed the formation of a B 1s peak at 193.5 eV corresponding to (B-O)x species. Even the briefest exposure to ambient conditions lead to hydroxylation of surface borochloride species. However, the Si 2p signature at 102 eV allowed for a confirmation of the formation of a direct Si-B bond. Density functional theory was utilized to supplement the analysis and identify possible major surface species resulting from these reactions. This work provides a new pathway to obtain a functionalized silicon surface with a direct Si-B bond that can potentially be exploited as a means of selective, ultra-shallow, and supersaturated doping.

| S-EPMC7583461 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data