Dataset Information

Rapid Fabrication of a Crystalline Myristic Acid-Based Superhydrophobic Film with Corrosion Resistance on Magnesium Alloys by the Facile One-Step Immersion Process.

ABSTRACT: A simple, easy, and rapid process of fabricating superhydrophobic surfaces on magnesium alloy AZ31 by a one-step immersion at room temperature was developed. The myristic acid-modified micro-/nanostructured surfaces showed static water contact angles over 150° and water contact angle hysteresis below 10°, thus illustrating superhydrophobic property. The shortest treatment time for obtaining the superhydrophobic surfaces was 30 s. In addition, we demonstrated for the first time that crystalline solid myristic acid could be formed on a Mg alloy using a suitable molar ratio of Ce ions and myristic acid. The contact angle hysteresis was lowered with an increase in the immersion time. Potentiodynamic polarization curve measurements revealed that the corrosion resistance of AZ31 treated by the immersion process improved considerably by the formation of superhydrophobic surfaces. The chemical durability of the superhydrophobic surfaces fabricated on AZ31 was also examined. The static water contact angle values for the superhydrophobic surfaces after immersion in aqueous solutions at pHs 4, 7, and 10 for 12 h were estimated to be 90 ± 2°, 119 ± 2°, and 138 ± 2°, respectively, demonstrating that their chemical durability in a basic solution was high.

SUBMITTER: Ishizaki T

PROVIDER: S-EPMC6644936 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Magnesium-based alloys are the most widely used materials for degradable metallic implants and have considerable potential for bone applications owing to their excellent stimulating effect on osteogenesis. However, their high corrosion rate limits their structural stability and causes oxygen deficiency and an excessive increase in the pH around the defect area during bone healing. Magnesium oxides, which are the main corrosion products of Mg, are nontoxic materials with useful effects on new bone formation and pH neutralization. Metal-phenolic networks were introduced recently as a cost-effective and efficient surface modifier and were fabricated by deposition of nanosized metal oxides on different types of substrates using the chemical reaction between phenolic groups and metallic ions. In this study, magnesium oxide films were formed successfully on a Mg-based substrate using Mg-phenolic networks. The effects of various coating parameters on the surface morphology, corrosion resistance, degradation behavior, wettability, and osteocompatibility of degradable metallic materials after surface modification with Mg-phenolic networks were thoroughly investigated for the first time. The results showed that the initial concentration of Mg ions was the main parameter affecting the corrosion resistance, which was almost as much as 3 times that of uncoated samples. Additionally, cytotoxicity and viability assessment and observation of the morphological changes in bonelike cells showed that the in vitro osteocompatibility was significantly enhanced by coatings with Mg concentrations of 2.4-3.6 mg mL-1. Finally, in vivo animal studies using the rat calvarial defect model confirmed that the proposed coating method mitigated the formation of gas cavities around the implantation area by reducing the corrosion rate of the Mg-based implant. The nanosized metal oxides produced by the Mg-phenolic network significantly improved the biodegradability and osteocompatibility of Mg alloys, suggesting a potential approach to advancing the clinical application of Mg alloys.

Dataset Information

Rapid Fabrication of a Crystalline Myristic Acid-Based Superhydrophobic Film with Corrosion Resistance on Magnesium Alloys by the Facile One-Step Immersion Process.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets