Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

LaFe _x Co_(1-x)O₃ Thin-Film Oxygen Reduction Catalysts Prepared Using Spray Pyrolysis without Conductive Additives.

ABSTRACT: LaFe _x Co_(1-x)O₃ thin films were prepared on fluorine-doped tin oxide conducting glass substrates by spray pyrolysis without any conductive additives and evaluated for their ability to catalyze the oxygen reduction reaction. Onset potential and current density were found to be comparable to platinum, and the resulting crystallite size was on the order of 20 nm. Coordination of the precursor metal ions by citrate was found not to be advantageous. Results from multiple scan linear sweep voltammetry suggest lattice oxide saturation during reduction of oxygen and lattice oxide depletion upon water oxidation. The color of the best-performing composition changes dramatically between 1.2 and -1.15 V versus saturated calomel electrode, so X-ray photoelectron spectra of the fully oxidized and reduced films were compared, demonstrating that cobalt in the film changes oxidation state. Performance of the films as a function of iron-to-cobalt ratio is consistent with what others have reported in the literature, indicating that spray pyrolysis is an efficient method to prepare and evaluate new catalytic materials.

SUBMITTER: Dervishogullari D

PROVIDER: S-EPMC6644956 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Semitransparent Sb2S3 thin film solar cells by ultrasonic spray pyrolysis for use in solar windows.

Project description:The integration of photovoltaic (PV) solar energy in zero-energy buildings requires durable and efficient solar windows composed of lightweight and semitransparent thin film solar cells. Inorganic materials with a high optical absorption coefficient, such as Sb2S3 (>105 cm-1 at 450 nm), offer semitransparency, appreciable efficiency, and long-term durability at low cost. Oxide-free throughout the Sb2S3 layer thickness, as confirmed by combined studies of energy dispersive X-ray spectroscopy and synchrotron soft X-ray emission spectroscopy, semitransparent Sb2S3 thin films can be rapidly grown in air by the area-scalable ultrasonic spray pyrolysis method. Integrated into a ITO/TiO2/Sb2S3/P3HT/Au solar cell, a power conversion efficiency (PCE) of 5.5% at air mass 1.5 global (AM1.5G) is achieved, which is a record among spray-deposited Sb2S3 solar cells. An average visible transparency (AVT) of 26% of the back-contact-less ITO/TiO2/Sb2S3 solar cell stack in the wavelength range of 380-740 nm is attained by tuning the Sb2S3 absorber thickness to 100 nm. In scale-up from mm2 to cm2 areas, the Sb2S3 hybrid solar cells show a decrease in efficiency of only 3.2% for an 88 mm2 Sb2S3 solar cell, which retains 70% relative efficiency after one year of non-encapsulated storage. A cell with a PCE of 3.9% at 1 sun shows a PCE of 7.4% at 0.1 sun, attesting to the applicability of these solar cells for light harvesting under cloud cover.

| S-EPMC6902894 | biostudies-literature

Electrical Properties of CZO Films Prepared by Ultrasonic Spray Pyrolysis.

Project description:CuZnO (CZO) films have attracted increasing amounts of attention due to their promising potential applications in semiconductor devices. ZnO shows n-type conductivity, and attempts have been made to dope several elements in ZnO to improve the electrical properties. This study investigated the electrical property transitions of CZO films and determined the copper concentration at which the conductivity of CZO films will change from n-type to p-type. In this study, CZO films were fabricated by ultrasonic spray pyrolysis with copper acetate, zinc acetate, and ammonium acetate precursor solution. The concentrations of Cu ions in the CZO films were controlled by the concentration ratios of copper acetate to zinc acetate in the precursor solutions. In addition, these samples were analyzed by Hall effect measurements, X-ray diffraction, transmittance measurements, and photoluminescence measurements. The results show that the conductivity of the CZO film changes from n-type to p-type when the copper ion concentration in the film is 5%.

| S-EPMC5512636 | biostudies-other

Copper conductive patterns through spray-pyrolysis of copper-diethanolamine complex solution.

Project description:A simple and low-cost method to fabricate copper conductive patterns at low temperature is critical for printed electronics. Low-temperature spray-pyrolysis of copper-alkanolamine complex solution shows high potential for this application. However, the produced copper patterns exhibit a granular structure consisting of connected fine copper particles. In this work, low-temperature spray-pyrolysis of copper formate-diethanolamine complex solution under N2 flow at a temperature of 200 °C was investigated. The effects of spraying conditions on microstructure and electrical properties of the patterns were examined. Our results revealed that the spraying rate is a critical parameter determining the degree of sintering and electrical resistivity of the patterns. A low spraying rate facilitates sintering, and hence well-sintered copper patterns with the lowest resistivity of 6.12 ??.cm (3.6 times of bulk copper) on a polyimide substrate could be fabricated.

| S-EPMC6029799 | biostudies-literature

Electrochemical properties of tungsten sulfide-carbon composite microspheres prepared by spray pyrolysis.

Project description:Tungsten sulfide (WS2)-carbon composite powders with superior electrochemical properties are prepared by a two-step process. WO3-carbon composite powders were first prepared by conventional spray pyrolysis, and they were then sulfidated to form WS2-carbon powders. Bare WS2 powders are also prepared by sulfidation of bare WO3 powders obtained by spray pyrolysis. Stacked graphitic layers could not be found in the bare WS2 and WS2-carbon composite powders. The amorphous bare WS2 and WS2-carbon composite powders have Brunauer-Emmett-Teller (BET) surface areas of 2.8 and 4 m(2) g(-1), respectively. The initial discharge and charge capacities of the WS2-carbon composite powders at a current density of 100 mA g(-1) are 1055 and 714 mA h g(-1), respectively, and the corresponding initial Coulombic efficiency is 68%. On the other hand, the initial discharge and charge capacities of the bare WS2 powders are 514 and 346 mA h g(-1), respectively. The discharge capacities of the WS2-carbon composite powders for the 2(nd) and 50(th) cycles are 716 and 555 mA h g(-1), respectively, and the corresponding capacity retention measured after first cycle is 78%.

| S-EPMC4148672 | biostudies-literature

Significant improvement of spray pyrolyzed ZnO thin film by precursor optimization for high mobility thin film transistors.

Project description:Metal-oxide thin-film transistors (TFT) fabricated by spray pyrolysis are of increasing interest because of its simple process and scalability. A bottleneck issue is to get a bubble-free and dense material. We studied the effect of ammonium acetate (AA) addition in the oxide precursor solution on the performance of spray-coated ZnO TFTs. AA acts as a stabilizer, which increases the solubility of the solution and enhances the film quality by reducing the defects. With AA addition in ZnO precursor, the films are coffee ring free with high mass density and better grain orientation. The ZnO TFT with AA exhibit a remarkable improvement of its device performance such as saturation mobility increasing from 5.12 to 41.53 cm2V-1s-1, the subthreshold swing decreasing from 340 to 162 mV/dec and on/off current ratio increasing from ~105 to 108. Additionally, the TFTs show excellent stability with a low threshold voltage shift of 0.1 V under gate bias stress. Therefore, the addition of AA is a promising approach to achieve high-performance ZnO TFTs for low-cost manufacturing of displays.

| S-EPMC7265479 | biostudies-literature

Controlling the Wettability of ZnO Thin Films by Spray Pyrolysis for Photocatalytic Applications.

Project description:Herein, we synthesized the zinc oxide (ZnO) thin films (TFs) deposited on glass substrates via spray pyrolysis (SP) to prepare self-cleaning glass. Various process parameters were used to optimize photocatalytic performance. Substrates were coated at room temperature (RT) and 250 °C with a 1 mL or 2 mL ZnO solution while maintaining a distance from the spray gun to the substrate of 20 cm or 30 cm. Several characterization techniques, i.e., XRD, SEM, AFM, and UV-Vis were used to determine the structural, morphological, and optical characteristics of the prepared samples. The wettability of the samples was evaluated using contact angle measurements. As ZnO is hydrophilic in nature, the RT deposited samples showed a hydrophilic character, whereas the ZnO TFs deposited at 250 °C demonstrated a hydrophobic character. The XRD results showed a higher degree of crystallinity for samples deposited on heated substrates. Because of this higher crystallinity, the surface energy decreased, and the contact angle increased. Moreover, by using 2 mL solution, better surface coverage and roughness were obtained for the ZnO TFs. However, by exploiting the distance of the spray to the samples size distribution and surface coverage can be controlled, the samples deposited at 30 mL showed a uniform particle size distribution from 30-40 nm. In addition, the photoactivity of the samples was tested by the degradation of rhodamine B dye. Substrates prepared with a 2 mL solution sprayed at 20 cm showed higher dye degradation than other samples, which can play a vital role in self-cleaning. Hence, by changing the said parameters, the ZnO thin film properties on glass substrates were optimized for self-cleaning diversity.

| S-EPMC9105918 | biostudies-literature

TiO2 thin films by ultrasonic spray pyrolysis as photocatalytic material for air purification.

Project description:In this study, we showed that the TiO2 thin films deposited onto window glass are practicable for air purification and self-cleaning applications. TiO2 films were deposited onto window glass by ultrasonic spray pyrolysis method. Different deposition temperatures were used in the range of 250-450°C. The structural, morphological, optical properties and surface chemical composition were investigated to understand probable factors affecting photocatalytic performance and wettability of the TiO2 thin films. The TiO2 thin films were smooth, compacted and adhered adequately on the substrate with a thickness in the range of 100-240 nm. X-ray diffraction patterns revealed that all the TiO2 thin films consisted of anatase phase structure with the mean crystallite size in the range of 13-35 nm. The optical measurements showed that the deposited films were highly transparent (approx. 85%). The wettability test results showed that the TiO2 thin films sprayed at 350°C and 450°C and annealed at 500°C for 1 h were superhydrophilic. The photocatalytic activity of the films was tested for the degradation of methyl tert-butyl ether (MTBE) in multi-section plug-flow reactor. The TiO2 film deposited at 350°C exhibited the highest amount of conversion of MTBE, approximately 80%.

| S-EPMC6408371 | biostudies-literature

Stable and Durable Conductive Superhydrophobic Coatings Prepared by Double-Layer Spray Coating Method.

Project description:Herein, a low cost, durable, and stable conductive superhydrophobic composite coating (CSC coating) was fabricated on a Q345 steel surface by simple double-layer spray coating. The water contact angle (WCA) of the CSC coating was 160° and the sliding angle (SA) was 3°. In addition to its excellent conductivity (3.10 × 103 Ω), the fabricated composite coating had good durability and wear resistance. After 10 sand-washing cycles, the CSC coating surface still exhibited stable superhydrophobicity (149° WCA, 9.5° SA). At 200 g pressure, the surface of the optimized CSC coating still maintained fine superhydrophobicity (150° WCA, 9.2° SA) and conductivity (1.86 × 104 Ω) after 10 abrasion cycles. In addition, it also exhibited fine adhesion (0.307 MPa) between the composite coating and the substrate. This functional superhydrophobic surface can be applied in specialty fields with harsh conditions such as coal mining and petrochemical activities. This new coating may also expand the application fields of superhydrophobic surfaces and have broad practical application prospects.

| S-EPMC8228788 | biostudies-literature

Spray-Coated Thin-Film Ni-Oxide Nanoflakes as Single Electrocatalysts for Oxygen Evolution and Hydrogen Generation from Water Splitting.

Project description:Electrochemical water splitting is a key process in many electrochemical energy conversion and storage phenomena. Simple synthesis methods to make highly porous and active nanostructured catalytic materials with large electroactive surface areas are very important to implement water-to-fuel conversion schemes. Herein, ultrafine, transparent thin-film nickel-oxide (NiO x ) nanoflakes are facilely synthesized following a simple spray-coating method from a solution-phase precursor. The NiO x nanoscale structures are grown on the FTO surface in the form of highly uniform smooth thin films. They are employed as promising bifunctional electrocatalysts for the overall water splitting process under alkaline conditions. During water oxidation catalysis, NiO x -SC/FTO initiates the oxygen evolution reaction (OER) at an overpotential ? of just 250 mV while generating current decade at just 300 mV and demonstrates well-balanced kinetics toward OER. 10 mA cm-2 current density remains persistent for many hours of continuous electrolysis at just 1.53 VRHE illustrating high robustness of the system. The catalyst also showed substantial activity and durability toward the hydrogen evolution reaction (HER) under the same electrochemical conditions. Tafel slopes of just 57 and 89 mV dec-1 for OER and HER in 0.5 M aqueous KOH solution, respectively, showing high intrinsic kinetics for electrocatalysis. Having high electrochemical surface area and an optimum number of electrochemically active sites, these transparent NiO x thin films can be advantageously combined with photoelectrochemical devices for light-driven water-to-fuel conversion systems.

| S-EPMC7240815 | biostudies-literature

Synthesis of nanoporous Mo:BiVO<sub>4</sub> thin film photoanodes using the ultrasonic spray technique for visible-light water splitting.

Project description:The use of bismuth vanadate (BiVO4) scheelite structures for converting solar energy into fuels and chemicals for fast growth in lab to industrial scale for large-area modules is a key challenge for further development. Herein, we demonstrate a new ultrasonic spray technique as a scalable and versatile coating technique for coating pristine and doped nanoporous BiVO4 thin film photoanodes directly on FTO-coated glass substrates for water splitting under visible irradiation. The successful Mo doping in BiVO4 lattice was confirmed by various characterization techniques such as XRD, Raman, EDS and XPS. The Mo:BiVO4 photoelectrode showed excellent performance with higher stability as compared to pristine BiVO4 samples.

| S-EPMC9473260 | biostudies-literature