Dataset Information

Control of Functionalities in GO: Effect of Bronsted Acids as Supported by Ab Initio Simulations and Experiments.

ABSTRACT: Graphene oxide (GO) is an attractive precursor for graphene, provided by the well-known wet-chemical oxidative process. The intercalation of acid in graphite is considered as a crucial step, and its subsequent oxidation holds special relevance in synthesis. So far, the above chemistry is dominated by usage of H₂SO₄. Recently, H₃PO₄ appeared as a suitable intercalant for graphite. However, its role is not well understood in the formation of GO, especially when present as a co-acid with H₂SO₄. Additionally, a relatively lower toxicity of H₃PO₄ as compared to H₂SO₄, elimination of toxic NaNO₃ usage, and a facile purification protocol are encouraging in terms of low-cost production of GO with a reduced environmental impact. Here, we report the systematic synthesis and characterization of GOs prepared with the variation in the ratio of H₂SO₄ and H₃PO₄. Ab initio simulations revealed that intercalation is primarily affected because of the usage of a mixture of co-acids. Interestingly, the ratio of the acids dictated the nature of the functionalities, extent of the defects, and morphology of the GOs, accounting for a pronounced effect on thermal stability, contact angle, zeta potential, and hydrodynamic size. The oxidation mechanism showed a predominance of H₂SO₄ content, whereas H₃PO₄ is found to mainly govern the intercalation of graphite, thereby affecting the acid-based intercalation-oxidation chemistry of graphite. The as-prepared GO suspension exhibited a high adsorption capacity for methylene blue dye removal in water, suggesting its potential as an adsorbent material in water treatment. The utility of the two acids affects the acid-based intercalation-oxidation chemistry of graphite and simultaneously may open up new opportunities for synthesized GOs, on tenets of green chemistry, in a wide arena of applications.

SUBMITTER: Yadav N

PROVIDER: S-EPMC6648546 | biostudies-literature | 2019 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Control of Functionalities in GO: Effect of Bronsted Acids as Supported by Ab Initio Simulations and Experiments.

Yadav Nisha N Kallur Vedha V Chakraborty Dwaipayan D Johari Priya P Lochab Bimlesh B

ACS omega 20190529 5

Graphene oxide (GO) is an attractive precursor for graphene, provided by the well-known wet-chemical oxidative process. The intercalation of acid in graphite is considered as a crucial step, and its subsequent oxidation holds special relevance in synthesis. So far, the above chemistry is dominated by usage of H2SO4. Recently, H3PO4 appeared as a suitable intercalant for graphite. However, its role is not well understood in the formation of GO, especial ...[more]

PMID: 31460031

Similar Datasets

Project description:BackgroundPredicting 3-dimensional protein structures from amino-acid sequences is an important unsolved problem in computational structural biology. The problem becomes relatively easier if close homologous proteins have been solved, as high-resolution models can be built by aligning target sequences to the solved homologous structures. However, for sequences without similar folds in the Protein Data Bank (PDB) library, the models have to be predicted from scratch. Progress in the ab initio structure modeling is slow. The aim of this study was to extend the TASSER (threading/assembly/refinement) method for the ab initio modeling and examine systemically its ability to fold small single-domain proteins.ResultsWe developed I-TASSER by iteratively implementing the TASSER method, which is used in the folding test of three benchmarks of small proteins. First, data on 16 small proteins (< 90 residues) were used to generate I-TASSER models, which had an average Calpha-root mean square deviation (RMSD) of 3.8A, with 6 of them having a Calpha-RMSD < 2.5A. The overall result was comparable with the all-atomic ROSETTA simulation, but the central processing unit (CPU) time by I-TASSER was much shorter (150 CPU days vs. 5 CPU hours). Second, data on 20 small proteins (< 120 residues) were used. I-TASSER folded four of them with a Calpha-RMSD < 2.5A. The average Calpha-RMSD of the I-TASSER models was 3.9A, whereas it was 5.9A using TOUCHSTONE-II software. Finally, 20 non-homologous small proteins (< 120 residues) were taken from the PDB library. An average Calpha-RMSD of 3.9A was obtained for the third benchmark, with seven cases having a Calpha-RMSD < 2.5A.ConclusionOur simulation results show that I-TASSER can consistently predict the correct folds and sometimes high-resolution models for small single-domain proteins. Compared with other ab initio modeling methods such as ROSETTA and TOUCHSTONE II, the average performance of I-TASSER is either much better or is similar within a lower computational time. These data, together with the significant performance of automated I-TASSER server (the Zhang-Server) in the 'free modeling' section of the recent Critical Assessment of Structure Prediction (CASP)7 experiment, demonstrate new progresses in automated ab initio model generation. The I-TASSER server is freely available for academic users http://zhang.bioinformatics.ku.edu/I-TASSER.

Project description:We investigated excess electron solvation dynamics in (NH3)n- ammonia clusters in the n = 8-32 size range by performing finite temperature molecular dynamics simulations. In particular, we focused on three possible scenarios. The first case is designed to model electron attachment to small neutral ammonia clusters (n ≤ ∼10) that form hydrogen-bonded chains. The excess electron is bound to the clusters via dipole bound states, and persists with a VDE of ∼160 meV at 100 K for the n = 8 cluster. The coupled nuclear and electronic relaxation is fast (within ∼100 fs) and takes place predominantly by intermolecular librational motions and the intramolecular umbrella mode. The second scenario illustrates the mechanism of excess electron attachment to cold compact neutral clusters of medium size (8 ≤ n ≤ 32). The neutral clusters show increasing tendency with size to bind the excess electron on the surface of the clusters in weakly bound, diffuse, and highly delocalized states. Anionic relaxation trajectories launched from these initial states provide no indication for excess electron stabilization for sizes n < 24. Excess electrons are likely to autodetach from these clusters. The two largest investigated clusters (n = 24 and 32) can accommodate the excess electron in electronic states that are mainly localized on the surface, but they may be partly embedded in the cluster. In the last 500 fs of the simulated trajectories, the VDE of the solvated electron fluctuates around ∼200 meV for n = 24 and ∼500 meV for n = 32, consistent with the values extrapolated from the experimentally observed linear VDE-n-1/3 trend. In the third case, we prepared neutral ammonia cluster configurations, including an n = 48 cluster, that contain possible electron localization sites within the interior of the cluster. Excess electrons added to these clusters localize in cavities with high VDEs up to 1.9 eV for n = 48. The computed VDE values for larger clusters are considerably higher than the experimentally observed photoelectric threshold energy for the solvated electron in bulk ammonia (∼1.4 eV). Molecular dynamics simulations launched from these initial cavity states strongly indicate, however, that these cavity structures exist only for ∼200 fs. During the relaxation the electron leaves the cavity and becomes delocalized, while the cluster loses its initial compactness.

Dataset Information

Control of Functionalities in GO: Effect of Bronsted Acids as Supported by Ab Initio Simulations and Experiments.

Publications

Control of Functionalities in GO: Effect of Bronsted Acids as Supported by Ab Initio Simulations and Experiments.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets