Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

One-Step Bark-Like Imitated Polypropylene (PP)/Polycarbonate (PC) Nanofibrous Meltblown Membrane for Efficient Particulate Matter Removal.

ABSTRACT: A bark-like imitated polypr opylene (PP)/polycarbonate (PC) nanofibrous membrane was constructed by one-step meltblown technique for efficient particulate matter (PM) removal. The effects of PC content (0%, 1%, 3%, 5%, and 7%) on membrane thermal stability, microscopic characteristics, filtration performance, hydrophilicity, and water vapor transmission were investigated. The results demonstrated that using facile design of incompatibility and viscosity difference between PC and PP polymers decreases average fiber diameter, creating a bark-like groove appearance and increasing surface potential, making a new PP/PC membrane with high filtration performance. The resultant PP/PC membrane had finer average fiber diameter of 0.63 μm, which was nearly 89.41% lower than PP membranes (5.95 μm), and its quality factor (0.036 Pa^-1) was nearly 2.12 times than that of PP membranes (0.017 Pa^-1) with the die hole diameter of 0.5 mm. This fabrication technique of a special meltblown filter membrane saves the cost of die retrofitting and post-processing, which provides an innovative method for particulate efficient removal of high efficient filters.

SUBMITTER: Li TT

PROVIDER: S-EPMC6723958 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Core-Shell Nanofibrous Materials with High Particulate Matter Removal Efficiencies and Thermally Triggered Flame Retardant Properties.

Project description:Dust filtration is a crucial process for industrial waste gas treatment. Great efforts have been devoted to improve the performance of dust filtration filters both in industrial and fundamental research. Conventional air-filtering materials are limited by three key issues: (1) Low filtration efficiency, especially for particulate matter (PM) below 1 ?m; (2) large air pressure drops across the filter, which require a high energy input to overcome; and (3) safety hazards such as dust explosions and fires. Here, we have developed a "smart" multifunctional material which can capture PM with high efficiency and an extremely low pressure drop, while possessing a flame retardant design. This multifunctionality is achieved through a core-shell nanofiber design with the polar polymer Nylon-6 as the shell and the flame retardant triphenyl phosphate (TPP) as the core. At 80% optical transmittance, the multifunctional materials showed capture efficiency of 99.00% for PM2.5 and >99.50% for PM10-2.5, with a pressure drop of only 0.25 kPa (0.2% of atmospheric pressure) at a flow rate of 0.5 m s-1. Moreover, during direct ignition tests, the multifunctional materials showed extraordinary flame retardation; the self-extinguishing time of the filtrate-contaminated filter is nearly instantaneous (0 s/g) compared to 150 s/g for unmodified Nylon-6.

| S-EPMC6062826 | biostudies-literature

High-performance inertial impaction filters for particulate matter removal.

Project description:Airborne particulate matter (PM) is causing more and more serious air pollution and threatening the public health. However, existing air filter technologies with the easy-to-block manner can rarely meet the requirements of high-performance PM filters. Here we propose a conceptually new type of inertial impaction filters for rapidly high-efficiency PM removal. Under the airflow velocity of 8.0?m/s, the real inertial impaction filters show high PM removal efficiencies of up to 97.77?±?1.53% and 99.47?±?0.45% for PM2.5 and PM10, respectively. Compared with the traditional air filters reported previously, the inertia impaction filters exhibit extremely low pressure drop of 5-10?Pa and high quality factor (QF) values of 0.380?Pa-1 and 0.524?Pa-1 for PM2.5 and PM10, respectively. These greatly improved QF values are achieved through a series of inertial separation processes. The feature dimension of filtration channel is dozens of times larger than PM average size, which greatly decreases airflow resistance. Particularly, this inertial structure can be made of various types of materials, which shows great potential for low-cost fabrication of large-area devices. As a stand-alone device or incorporated with the existing PM air filter, this inertial impaction filter will bring great benefits to the public health.

| S-EPMC5859014 | biostudies-literature

suspended particulate matter

Project description:suspended particulate matter Raw sequence reads

| PRJNA423140 | ENA

Dose-Dependent Cytotoxicity of Polypropylene Microplastics (PP-MPs) in Two Freshwater Fishes.

Project description:The massive accumulation of plastics over the decades in the aquatic environment has led to the dispersion of plastic components in aquatic ecosystems, invading the food webs. Plastics fragmented into microplastics can be bioaccumulated by fishes via different exposure routes, causing several adverse effects. In the present study, the dose-dependent cytotoxicity of 8-10 μm polypropylene microplastics (PP-MPs), at concentrations of 1 mg/g (low dose) and 10 mg/g dry food (high dose), was evaluated in the liver and gill tissues of two fish species, the zebrafish (Danio rerio) and the freshwater perch (Perca fluviatilis). According to our results, the inclusion of PP-MPs in the feed of D. rerio and P.&nbsp;fluviatilis hampered the cellular function of the gills and hepatic cells by lipid peroxidation, DNA damage, protein ubiquitination, apoptosis, autophagy, and changes in metabolite concentration, providing evidence that the toxicity of PP-MPs is dose dependent. With regard to the individual assays tested in the present study, the biggest impact was observed in DNA damage, which exhibited a maximum increase of 18.34-fold in the liver of D. rerio. The sensitivity of the two fish species studied differed, while no clear tissue specificity in both fish species was observed. The metabolome of both tissues was altered in both treatments, while tryptophan and nicotinic acid exhibited the greatest decrease among all metabolites in all treatments in comparison to the control. The battery of biomarkers used in the present study as well as metabolomic changes could be suggested as early-warning signals for the assessment of the aquatic environment quality against MPs. In addition, our results contribute to the elucidation of the mechanism induced by nanomaterials on tissues of aquatic organisms, since comprehending the magnitude of their impact on aquatic ecosystems is of great importance.

| S-EPMC9692651 | biostudies-literature

High-performance particulate matter including nanoscale particle removal by a self-powered air filter.

Project description:Particulate matter (PM) pollutants, including nanoscale particles (NPs), have been considered serious threats to public health. In this work, a self-powered air filter that can be used in high-efficiency removal of PM, including NPs, is presented. An ionic liquid-polymer (ILP) composite is irregularly distributed onto a sponge network to form an ILP@MF filter. Enabled by its unique electrochemical properties, the ILP@MF filter can remove PM2.5 and PM10 with high efficiencies of 99.59% and 99.75%, respectively, after applying a low voltage. More importantly, the charged ILP@MF filter realizes a superior removal for NPs with an efficiency of 93.77%. A micro-button lithium cell or silicon-based solar panel is employed as a power supply platform to fabricate a portable and self-powered face mask, which exhibits excellent efficacy in particulate removal compared to commercial masks. This work shows a great promise for high-performance purification devices and facile mask production to remove particulate pollutants.

| S-EPMC7125120 | biostudies-literature

Multifunctional filter membrane for face mask using bacterial cellulose for highly efficient particulate matter removal.

Project description:AbstractParticulate matter (PM) pollution and SARS-CoV-2 (COVID-19) have brought severe threats to public health. High level of PM serves as a carrier of COVID-19 which is a global pandemic. This study fabricated filter membrane for face mask using bacterial cellulose and fingerroot extract (BC-FT) via immersion technique. The surface area, pore volume and pore size of BC were analyzed by Brunauer-Emmett-Teller. The physiochemical properties of the membrane were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffractometer. The crystallinity decreased from 63.7% in pure BC to 52.4% in BC-FT filter membrane. Young's modulus increased from 1277.02 MPa in pure BC to 2251.17 MPa in BC-FT filter membrane. The filter membrane showed excellent PM 0.1 removal efficiency of 99.83% and antimicrobial activity against Staphylococcus aureus and Escherichia coli. The fabricated membrane is excellent to prevent inhalation of PM2.5 and COVID-19 respiratory droplet.Graphic abstractSupplementary informationThe online version contains supplementary material available at 10.1007/s10570-022-04641-3.

| S-EPMC9167669 | biostudies-literature

Layered Double Hydroxide (MgFeAl-LDH)-Based Polypropylene (PP) Nanocomposite: Mechanical Properties and Thermal Degradation.

Project description:This work analyzes the thermal degradation and mechanical properties of iron (Fe)-containing MgAl layered double hydroxide (LDH)-based polypropylene (PP) nanocomposite. Ternary metal (MgFeAl) LDHs were prepared using the urea hydrolysis method, and Fe was used in two different concentrations (5 and 10 mol%). Nanocomposites containing MgFeAl-LDH and PP were prepared using the melt mixing method by a small-scale compounder. Three different loadings of LDHs were used in PP (2.5, 5, and 7.5 wt%). Rheological properties were determined by rheometer, and flammability was studied using the limiting oxygen index (LOI) and UL94 (V and HB). Color parameters (L*, a*, b*) and opacity of PP nanocomposites were measured with a spectrophotometer. Mechanical properties were analyzed with a universal testing machine (UTM) and Charpy impact test. The thermal behavior of MgFeAl-LDH/PP nanocomposites was studied using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The morphology of LDH/PP nanocomposites was analyzed with a scanning electron microscope (SEM). A decrease in melt viscosity and increase in burning rate were observed in the case of iron (Fe)-based PP nanocomposites. A decrease in mechanical properties interpreted as increased catalytic degradation was also observed in iron (Fe)-containing PP nanocomposites. Such types of LDH/PP nanocomposites can be useful where faster degradation or faster recycling of polymer nanocomposites is required because of environmental issues.

| S-EPMC8512664 | biostudies-literature

tendon mRNA seq after particulate matter inhalation

2022-08-03 | GSE200463 | GEO

Exposure to urban particulate matter (EHC-93)

Project description:We isolated total lung RNA from spontaneously hypertensive male rats 2–40 h after exposure to reference EHC-93. Three animals were exposed to EHC-93 in saline(10 mg/kg body weight) or saline at each time via intratracheal instillation or no instillation at all. RNA from different times was pooled for array hybridization as indicated. Keywords: time-course

2004-11-01 | GSE1796 | GEO

Tendon methylation microarray after particulate matter inhalation

Project description:Open tenotomy of the Achilles tendon of 6 rats was performed. The animals were divided into two groups according to exposure of PM2.5 (particulate matter less than 2.5 µm): control group (Non-PM group) or PM exposure group (PM group). After 6 weeks of PM exposure, the tendon DNA was extracted and anlyzed. Genome-wide DNA methylation profiles were determinen. DNA amplicons were prepared using Differential Methylation Hybridization (DMH) method, subsequently hybridized on to the Customized Agilent Rat CpG island Microarray. The goal was to unravel the DNA methylation patterns in different subgropus of tendon tissue according to partciulate matter exposure.

2022-08-03 | GSE200709 | GEO

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data