Dataset Information

Age estimation using canine pulp volumes in adults: a CBCT image analysis.

ABSTRACT: Secondary dentine deposition is responsible for the decrease in the volume of the pulp cavity with age. Therefore, the volume of the pulp cavity can be considered as a predictor for estimating age. The aims of this study were to investigate the relationship strength between canine pulp volumes and chronological age from homogenous (approximately equal numbers of individuals in each age range) age distribution and to assess the effect of sex as predictor in age estimation. This study was performed on 719 subjects of Pakistani origin. Cone beam computed tomography images of 521 left maxillary and 681 left mandibular canines were collected from 368 females and 349 males aged from 15 to 65 years. Planmeca Romexis® software was used to trace the outline of the pulp cavity and to calculate pulp volumes. Regression analysis was performed to assess the correlation between pulp volumes considering with and without sex as a predictor with chronological age. The obtained results showed that mandibular canine pulp volume and sex have the highest predictive power (R2?=?0.33). The relationship between mandibular canine pulp volume and sex with chronological age demonstrates an odd S-shaped non-linear relationship. A statistically significant difference in volumes of pulp was found (p?=?0.000) between males and females. The conclusion was that predictions using the pulp volume of the mandibular canine and sex produced the best estimates of chronological age.

SUBMITTER: Kazmi S

PROVIDER: S-EPMC6811669 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Age estimation using canine pulp volumes in adults: a CBCT image analysis.

Kazmi Shakeel S Mânica Scheila S Revie Gavin G Shepherd Simon S Hector Mark M

International journal of legal medicine 20190830 6

Secondary dentine deposition is responsible for the decrease in the volume of the pulp cavity with age. Therefore, the volume of the pulp cavity can be considered as a predictor for estimating age. The aims of this study were to investigate the relationship strength between canine pulp volumes and chronological age from homogenous (approximately equal numbers of individuals in each age range) age distribution and to assess the effect of sex as predictor in age estimation. This study was performe ...[more]

PMID: 31471652

Similar Datasets

Project description:The image quality (IQ) of imaging systems must be sufficiently high for image-guided radiation therapy (IGRT). Hence, users should implement a quality assurance program to maintain IQ. In our routine IQ tests of the kV cone-beam CT system (Elekta XVI), image noise was quantified by noise standard deviation (NSD), which was the standard deviation of CT numbers measured in a small area in an image of an IQ test phantom (Catphan), and the high spatial resolution (HSR) was evaluated by the number of line-pairs (LPN) visually recognizable in the image. We also measured the image uniformity, the low contrast resolution, and the distances of two points for geometrical accuracy. For this study, we did an additional evaluation of the XVI data for 12 monthly IQ tests by using noise power spectrum (NPS) for noise, modulation transfer function (MTF) for HSR, and CT number-to-density relationship. NPS was obtained by applying Fourier analysis in a small area on the uniformity test section of Catphan. The MTF analysis was performed by applying the Droege-Morin (D-M) method to the line-pair bar regions in the phantom. The CT number-to-density relationship was obtained for insert materials in the low-contrast test section of the phantom. All the quantities showed a noticeable change over the one-year period. Especially the noise level improved significantly after a repair of the imager. NPS was more sensitive to the IQ change than NSD. MTF could provide more quantitative and objective evaluation of HSR. The CT number was very different from the expected CT number, but the CT number-to-density curves were constant within 5% except for two months. Since the D-M method is easy to implement, we recommend using MTF instead of LPN even for routine QA. The IQ of the imaging systems was constantly changing; hence, IQ tests should be periodically performed. Additionally, we found the importance of IQ tests after every service work, including detector calibration as well as preventive maintenance.

Project description:PurposeRoutine quality assurance (QA) of cone-beam computed tomography (CBCT) scans used for image-guided radiotherapy is prescribed by the American Association of Physicists in Medicine Task Group (TG)-142 report. For CBCT image quality, TG-142 recommends using clinically established baseline values as QA tolerances. This work examined how image quality parameters vary both across machines of the same model and across different CBCT techniques. Additionally, this work investigated how image quality values are affected by imager recalibration and repeated exposures during routine QA.MethodsCone-beam computed tomography scans of the Catphan 604 phantom were taken on four TrueBeam® and one Edge™ linear accelerator using four manufacturer-provided techniques. TG-142 image quality parameters were calculated for each CBCT scan using SunCHECK Machine™. The variability of each parameter with machine and technique was evaluated using a two-way ANOVA test on a dataset consisting of 200 CBCT scans. The impact of imager calibration on image quality parameters was examined for a subset of three machines using an unpaired Student's t-test. The effect of artifacts appearing on CBCTs taken in rapid succession was characterized and an approach to reduce their appearance was evaluated. Additionally, a set of baselines and tolerances for all image quality metrics was presented.ResultsAll imaging parameters except geometric distortion varied with technique (P < 0.05) and all imaging parameters except slice thickness varied with machine (P < 0.05). Imager calibration can change the expected value of all imaging parameters, though it does not consistently do so. While changes are statistically significant, they may not be clinically significant. Finally, rapid acquisition of CBCT scans can introduce image artifacts that degrade CBCT uniformity.ConclusionsThis work characterized the variability of acquired CBCT data across machines and CBCT techniques along with the impact of imager calibration and rapid CBCT acquisition on image quality.

Project description:Purpose: Conventional iterative low-dose CBCT reconstruction techniques are slow and tend to over-smooth edges through uniform weighting of the image penalty gradient. In this study, we present a non-iterative analytical low-dose CBCT reconstruction technique by restoring the noisy low-dose CBCT projection with the non-local total variation (NLTV) method. Methods: We modeled the low-dose CBCT reconstruction as recovering high quality, high-dose CBCT x-ray projections (100 kVp, 1.6 mAs) from low-dose, noisy CBCT x-ray projections (100 kVp, 0.1 mAs). The restoration of CBCT projections was performed using the NLTV regularization method. In NLTV, the x-ray image is optimized by minimizing an energy function that penalizes gray-level difference between pair of pixels between noisy x-ray projection and denoising x-ray projection. After the noisy projection is restored by NLTV regularization, the standard FDK method was applied to generate the final reconstruction output. Results: Significant noise reduction was achieved comparing to original, noisy inputs while maintaining the image quality comparable to the high-dose CBCT projections. The experimental validations show the proposed NLTV algorithm can robustly restore the noise level of x-ray projection images while significantly improving the overall image quality. The improvement in normalized mean square error (NMSE) and peak signal-to-noise ratio (PSNR) measured from the non-local total variation-gradient projection (NLTV-GPSR) algorithm is noticeable compared to that of uncorrected low-dose CBCT images. Moreover, the difference of CNRs from the gains from the proposed algorithm is noticeable and comparable to high-dose CBCT. Conclusion: The proposed method successfully restores noise degraded, low-dose CBCT projections to high-dose projection quality. Such an outcome is a considerable improvement to the reconstruction result compared to the FDK-based method. In addition, a significant reduction in reconstruction time makes the proposed algorithm more attractive. This demonstrates the potential use of the proposed algorithm for clinical practice in radiotherapy.

Dataset Information

Age estimation using canine pulp volumes in adults: a CBCT image analysis.

Publications

Age estimation using canine pulp volumes in adults: a CBCT image analysis.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets