Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Impact of Line Edge Roughness on ReRAM Uniformity and Scaling.

ABSTRACT: We investigate the effects of Line Edge Roughness (LER) of electrode lines on the uniformity of Resistive Random Access Memory (ReRAM) device areas in cross-point architectures. To this end, a modeling approach is implemented based on the generation of 2D cross-point patterns with predefined and controlled LER and pattern parameters. The aim is to evaluate the significance of LER in the variability of device areas and their performances and to pinpoint the most critical parameters and conditions. It is found that conventional LER parameters may induce >10% area variability depending on pattern dimensions and cross edge/line correlations. Increased edge correlations in lines such as those that appeared in Double Patterning and Directed Self-assembly Lithography techniques lead to reduced area variability. Finally, a theoretical formula is derived to explain the numerical dependencies of the modeling method.

SUBMITTER: Constantoudis V

PROVIDER: S-EPMC6926851 | biostudies-literature | 2019 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Impact of Line Edge Roughness on ReRAM Uniformity and Scaling.

Constantoudis Vassilios V Papavieros George G Karakolis Panagiotis P Khiat Ali A Prodromakis Themistoklis T Dimitrakis Panagiotis P

Materials (Basel, Switzerland) 20191130 23

We investigate the effects of Line Edge Roughness (LER) of electrode lines on the uniformity of Resistive Random Access Memory (ReRAM) device areas in cross-point architectures. To this end, a modeling approach is implemented based on the generation of 2D cross-point patterns with predefined and controlled LER and pattern parameters. The aim is to evaluate the significance of LER in the variability of device areas and their performances and to pinpoint the most critical parameters and conditions ...[more]

PMID: 31801205

Similar Datasets

The Influence of Additives on the Interfacial Width and Line Edge Roughness in Block Copolymer Lithography.

Project description:The challenges of patterning next generation integrated circuits have driven the semiconductor industry to look outside of traditional lithographic methods in order to continue cost effective size scaling. The directed self-assembly (DSA) of block copolymers (BCPs) is a nanofabrication technique used to reduce the periodicity of patterns prepared with traditional optical methods. BCPs with large interaction parameters (χeff), provide access to smaller pitches and reduced interface widths. Larger χeff is also expected to be correlated with reduced line edge roughness (LER), a critical performance parameter in integrated circuits. One approach to increasing χeff is blending the BCP with a phase selective additive, such as an Ionic liquid (IL). The IL does not impact the etching rates of either phase, and this enables a direct interrogation of whether the change in interface width driven by higher χeff translates into lower LER. The effect of the IL on the layer thickness and interface width of a BCP are examined, along with the corresponding changes in LER in a DSA patterned sample. The results demonstrate that increased χeff through additive blending will not necessarily translate to a lower LER, clarifying an important design criterion for future material systems.

| S-EPMC7580231 | biostudies-literature

Impact of surface roughness on liquid-liquid transition.

Project description:Liquid-liquid transition (LLT) in single-component liquids is one of the most mysterious phenomena in condensed matter. So far, this problem has attracted attention mainly from the fundamental viewpoint. We report the first experimental study on an impact of surface nanostructuring on LLT by using a surface treatment called rubbing, which is the key technology for the production of liquid crystal displays. We find that this rubbing treatment has a significant impact on the kinetics of LLT of an isotropic molecular liquid, triphenyl phosphite. For a liquid confined between rubbed surfaces, surface-induced barrierless formation of the liquid II phase is observed even in a metastable state, where there should be a barrier for nucleation of the liquid II phase in bulk. Thus, surface rubbing of substrates not only changes the ordering behavior but also significantly accelerates the kinetics. This spatiotemporal pattern modulation of LLT can be explained by a wedge-filling transition and the resulting drastic reduction of the nucleation barrier. However, this effect completely disappears in the unstable (spinodal) regime, indicating the absence of the activation barrier even for bulk LLT. This confirms the presence of nucleation-growth- and spinodal decomposition-type LLT, supporting the conclusion that LLT is truly a first-order transition with criticality. Our finding also opens up a new way to control the kinetics of LLT of a liquid confined in a solid cell by structuring its surface on a mesoscopic length scale, which may contribute to making LLT useful for microfluidics and other industrial applications.

| S-EPMC5315451 | biostudies-literature

Rear-edge, low-diversity, and haplotypic uniformity in cold-adapted <i>Bupleurum euphorbioides</i> interglacial refugia populations.

Project description:The high genetic diversity of rear-edge refugia populations is predicted to have resulted from species repeatedly migrating to low latitudes during glacial periods over the course of Quaternary climate change. However, several recent empirical studies of cold-tolerant plants revealed the opposite pattern. We investigated whether current habitats of the cold-adapted and range-restricted Bupleurum euphorbioides in the Baekdudaegan, South Korea, and North Korea could be interglacial refugia, and documented how their rear-edge populations differ genetically from those of typical temperate species. Phylogeographic analysis and ecological niche modeling (ENM) were used. The genetic structure was analyzed using microsatellite markers and chloroplast DNA sequences. The congener B. longiradiatum was included as a typical temperate plant species. Despite having almost identical life history traits, these congeneric species exhibited contrasting patterns of genetic diversity. ENM revealed an apparent maximum range contraction during the last interglacial. In contrast, its range expanded northward to the Russian Far East (Primorsky) during the Last Glacial Maximum. Thus, we hypothesize that B. euphorbioides retreated to its current refugia during interglacial periods. Unlike populations in the central region, the rear-edge populations were genetically impoverished and uniform, both within populations and in pooled regional populations. The rear-edge B. euphorbioides survived at least one past interglacial, contributing to the species' genetic diversity. We believe that such genetic variation in the cold-adapted B. euphorbioides gives the species the necessary adaptations to survive an upcoming favorable environment (the next glacial), unless there is artificial environmental change.

| S-EPMC7548181 | biostudies-literature

Unconventional Current Scaling and Edge Effects for Charge Transport through Molecular Clusters.

Project description:Metal-molecule-metal junctions are the key components of molecular electronics circuits. Gaining a microscopic understanding of their conducting properties is central to advancing the field. In the present contribution, we highlight the fundamental differences between single-molecule and ensemble junctions focusing on the fundamentals of transport through molecular clusters. In this way, we elucidate the collective behavior of parallel molecular wires, bridging the gap between single molecule and large-area monolayer electronics, where even in the latter case transport is usually dominated by finite-size islands. On the basis of first-principles charge-transport simulations, we explain why the scaling of the conductivity of a junction has to be distinctly nonlinear in the number of molecules it contains. Moreover, transport through molecular clusters is found to be highly inhomogeneous with pronounced edge effects determined by molecules in locally different electrostatic environments. These effects are most pronounced for comparably small clusters, but electrostatic considerations show that they prevail also for more extended systems.

| S-EPMC5730946 | biostudies-literature

The Impact of Basal Roughness on Inland Thwaites Glacier Sliding

Project description:Abstract Swath radar technology enables three‐dimensional mapping of modern glacier beds over large areas at resolutions that are higher than those typically used in ice‐flow models. These data may enable new understanding of processes at the ice‐bed interface. Here, we use two densely surveyed swath‐mapped topographies (<50 m2 resolution) of Thwaites Glacier to investigate the sensitivity of inferred basal friction proxies to bed roughness magnitude and orientation. Our work suggests that along‐flow roughness influences inferred friction more than transverse‐flow roughness, which agrees with analytic form‐drag sliding theory. Using our model results, we calculate the slip length (the ratio of internal shear to basal slip). We find excellent agreement between the numerically derived slip lengths and slip lengths predicted by analytic form‐drag sliding theory, which suggests that unresolved short wavelength bed roughness may control sliding in the Thwaites interior. Key Points We infer high‐resolution basal resistance on Thwaites Glacier using a 3D, full‐stress model with 3D radar swath‐mapped basal topographies Drag due to material properties and flow around obstacles remain entangled below the spatial resolutions of standard models High‐wavenumber (short wavelength) basal roughness parallel to ice flow has the largest effect on the model inferred basal flow resistance

| S-EPMC9541487 | biostudies-literature

How levelling and scan line corrections ruin roughness measurement and how to prevent it.

Project description:Surface roughness plays an important role in various fields of nanoscience and nanotechnology. However, the present practices in roughness measurements, typically based on some Atomic Force Microscopy measurements for nanometric roughness or optical or mechanical profilometry for larger scale roughness significantly bias the results. Such biased values are present in nearly all the papers dealing with surface parameters, in the areas of nanotechnology, thin films or material science. Surface roughness, most typically root mean square value of irregularities Sq is often used parameter that is used to control the technologies or to link the surface properties with other material functionality. The error in estimated values depends on the ratio between scan size and roughness correlation length and on the way how the data are processed and can easily be larger than 10% without us noting anything suspicious. Here we present a survey of how large is the problem, detailed analysis of its nature and suggest methods to predict the error in roughness measurements and possibly to correct them. We also present a guidance for choosing suitable scan area during the measurement.

| S-EPMC7499267 | biostudies-literature

Quantum critical scaling at the edge of Fermi liquid stability in a cuprate superconductor.

Project description:In the high-temperature cuprate superconductors, the pervasiveness of anomalous electronic transport properties suggests that violation of conventional Fermi liquid behavior is closely tied to superconductivity. In other classes of unconventional superconductors, atypical transport is well correlated with proximity to a quantum critical point, but the relative importance of quantum criticality in the cuprates remains uncertain. Here, we identify quantum critical scaling in the electron-doped cuprate material La(2-x)Ce(x)CuO(4) with a line of quantum critical points that surrounds the superconducting phase as a function of magnetic field and charge doping. This zero-temperature phase boundary, which delineates a metallic Fermi liquid regime from an extended non-Fermi liquid ground state, closely follows the upper critical field of the overdoped superconducting phase and gives rise to an expanse of distinct non-Fermi liquid behavior at finite temperatures. Together with signatures of two distinct flavors of quantum fluctuations, these facts suggest that quantum criticality plays a significant role in shaping the anomalous properties of the cuprate phase diagram.

| S-EPMC3365146 | biostudies-literature

The scaling laws of edge vs. bulk interlayer conduction in mesoscale twisted graphitic interfaces.

Project description:The unusual electronic properties of edges in graphene-based systems originate from the pseudospinorial character of their electronic wavefunctions associated with their non-trivial topological structure. This is manifested by the appearance of pronounced zero-energy electronic states localized at the material zigzag edges that are expected to have a significant contribution to the interlayer transport in such systems. In this work, we utilize a unique experimental setup and electronic transport calculations to quantitatively distinguish between edge and bulk transport, showing that their relative contribution strongly depends on the angular stacking configuration and interlayer potential. Furthermore, we find that, despite of the strong localization of edge state around the circumference of the contact, edge transport in incommensurate interfaces can dominate up to contact diameters of the order of 2 μm, even in the presence of edge disorder. The intricate interplay between edge and bulk transport contributions revealed in the present study may have profound consequences on practical applications of nanoscale twisted graphene-based electronics.

| S-EPMC7506013 | biostudies-literature

The Effect of Surface Roughness on the Contact Line and Splashing Dynamics of Impacting Droplets.

Project description:Whether a droplet splashes upon impact onto a solid is known to depend not only on the fluid properties and its speed, but also on the substrate characteristics. Past research has shown that splashing is heavily influenced by the substrate roughness. Indeed, in this manuscript, we demonstrate that splashing is ruled by the surface roughness, the splashing ratio, and the dynamic contact angle. Experiments consist of water and ethanol droplets impacting onto solid substrates with varying degrees of roughness. High speed imaging is used to extract the dynamic contact angle as a function of the spreading speed for these impacting droplets. During the spreading phase, the dynamic contact angle achieves an asymptotic maximum value, which depends on the substrate roughness and the liquid properties. We found that this maximum dynamic contact angle, together with the liquid properties, the ratio of the peak to peak roughness and the surface feature mean width, determines the splashing to no-splashing threshold. In addition, these parameters consistently differentiate the splashing behaviour of impacts onto smooth hydrophilic, hydrophobic and superhydrophobic surfaces.

| S-EPMC6803702 | biostudies-literature

Scaling trends of bird's alular feathers in connection to leading-edge vortex flow over hand-wing.

Project description:An aerodynamic structure ubiquitous in Aves is the alula; a small collection of feathers muscularized near the wrist joint. New research into the aerodynamics of this structure suggests that its primary function is to induce leading-edge vortex (LEV) flow over bird's outer hand-wing to enhance wing lift when manuevering at slow speeds. Here, we explore scaling trends of the alula's spanwise position and its connection to this function. Specifically, we test the hypothesis that the relative distance of the alula from the wing tip is that which maximizes LEV-lift when the wing is spread and operated in a deep-stall flight condition. To test this, we perform experiments on model wings in a wind tunnel to approximate this distance and compare our results to positional measurements of the alula on spread-wing specimens. We found the position of the alula on non-aquatic birds selected for alula optimization to be located at or near the lift-maximizing position predicted by wind tunnel experiments. These findings shed new light on avian wing anatomy and the role of unconventional aerodynamics in shaping it.

| S-EPMC7220954 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data