Dataset Information

Adsorptive performance of a mixture of three nonliving algae classes for nickel remediation in synthesized wastewater.

ABSTRACT: Purpose:The present study provided a comprehensive description regarding the application of a mixture of three nonliving classes of algae as a promising and inexpensive biosorbent for removing toxic nickel (Ni(II)) ions from the aqueous medium. Methods:The biosorption process was tested by varying several experimental parameters such as pH (2-8), contaminant concentration (20-300 mg/L), biosorbent content (0.2-2 g/100 mL), and temperature (20-40 °C). In addition, the competition effects of the presence of Pb(II), Cu(II), and Zn(II) ions on the Ni(II) removal efficiency was studied by varying their concentrations from 30 to 40 mg/L. Results:The microscopic analysis of algae demonstrated that the used biosorbent consisted mainly of Chrysophyta (80%), Chlorophyte (14%), and Cyanophyta (6%). Results demonstrated that these environmental parameters influenced the removal efficiency with a different degree and there was no stable effects rank at conditions under examination. FT-IR and SEM analysis revealed that the biosorbent surface consists of many strong and active groups of negative valences such as hydroxyl and carboxyl groups, thus exhibiting several morphological properties of interest. Further, it was found that the Temkin model best fitted the isotherm biosorption data. The kinetic study showed that the Ni(II) biosorption was rapid within first 20 min of reaction time, thereby following a pseudo-second-order model, which in turn demonstrated a chemisorption process of Ni(II) ions reaction with the biosorbent binding sites. Also, the thermodynamic study suggested that the biosorption process of Ni(II) onto algal biomass was a spontaneous and endothermic in nature. The maximum uptake of Ni(II) was 9.848 mg/g under optimized conditions and neutral environment. Conclusions:Thus, this significant finding suggested a favorable and eco-friendly treatment mechanism for removal of Ni(II) ions from aqueous medium via biosorption onto the used mixture of nonliving algal biomass.

SUBMITTER: Mohammed AA

PROVIDER: S-EPMC6985309 | biostudies-literature | 2019 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Adsorptive performance of a mixture of three nonliving algae classes for nickel remediation in synthesized wastewater.

Mohammed Ahmed A AA Najim Aya A AA Al-Musawi Tariq J TJ Alwared Abeer I AI

Journal of environmental health science & engineering 20190402 2

<h4>Purpose</h4>The present study provided a comprehensive description regarding the application of a mixture of three nonliving classes of algae as a promising and inexpensive biosorbent for removing toxic nickel (Ni(II)) ions from the aqueous medium.<h4>Methods</h4>The biosorption process was tested by varying several experimental parameters such as pH (2-8), contaminant concentration (20-300 mg/L), biosorbent content (0.2-2 g/100 mL), and temperature (20-40 °C). In addition, the competition e ...[more]

PMID: 32030131

Similar Datasets

Project description:Magnetic nanoparticles are used in adsorptive removal of heavy metals from polluted wastewater. However, their poor stability in an acidic medium necessitates their protection with a coating layer. Coating magnetic nanoparticles with carbon showed proper protection but the heavy metal removal efficiency was slightly weak. However, to boost the removal efficiencies of surface functionalization, polyacrylamide was applied to carbon-coated Fe₃O₄ nanoparticles. In this paper, to facilitate the synthesis process, one-step carbon coating and polyacrylamide functionalization were conducted using the hydrothermal technique with the aim of enhancing the adsorptive removal capacity of Fe₃O₄ nanoparticles towards some heavy metals such as Cu(II), Ni(II), Co(II), and Cd(II). The results showed that the one-step process succeeded in developing a carbon coating layer and polyacrylamide functionality on Fe₃O₄ nanoparticles. The stability of the magnetic Fe₃O₄ nanoparticles as an adsorbent in an acidic medium was improved due to its resistance to the dissolution that was gained during carbon coating and surface functionalization with polyacrylamide. The adsorptive removal process was investigated in relation to various parameters such as pH, time of contact, metal ion concentrations, adsorbent dose, and temperature. The polyacrylamide functionalized Fe₃O₄ showed an improvement in the adsorption capacity as compared with the unfunctionalized one. The conditions for superior adsorption were obtained at pH 6; time of contact, 90 min; metal solution concentration, 200 mg/L; adsorbent dose, 0.3 g/L. The modeling of the adsorption data was found to be consistent with the pseudo-second-order kinetic model, which suggests a fast adsorption process. However, the equilibrium data modeling was consistent with both the Langmuir and Freundlich isotherms. Furthermore, the thermodynamic parameters of the adsorptive removal process, including ΔG°, ΔH°, and ΔS°, indicated a spontaneous and endothermic sorption process. The developed adsorbent can be utilized further for industrial-based applications.

Dataset Information

Adsorptive performance of a mixture of three nonliving algae classes for nickel remediation in synthesized wastewater.

Publications

Adsorptive performance of a mixture of three nonliving algae classes for nickel remediation in synthesized wastewater.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets