Dataset Information

Size, composition, morphology, and health implications of airborne incidental metal-containing nanoparticles.

ABSTRACT: There is great concern regarding the adverse health implications of engineered nanoparticles. However, there are many circumstances where the production of incidental nanoparticles, i.e., nanoparticles unintentionally generated as a side product of some anthropogenic process, is of even greater concern. In this study, metal-based incidental nanoparticles were measured in two occupational settings: a machining center and a foundry. On-site characterization of substrate-deposited incidental nanoparticles using a field-portable X-ray fluorescence provided some insights into the chemical characteristics of these metal-containing particles. The same substrates were then used to carry out further off-site analysis including single-particle analysis using scanning electron microscopy and energy-dispersive X-ray spectroscopy. Between the two sites, there were similarities in the size and composition of the incidental nanoparticles as well as in the agglomeration and coagulation behavior of nanoparticles. In particular, incidental nanoparticles were identified in two forms: submicrometer fractal-like agglomerates from activities such as welding and supermicrometer particles with incidental nanoparticles coagulated to their surface, herein referenced as nanoparticle collectors. These agglomerates will affect deposition and transport inside the respiratory system of the respirable incidental nanoparticles and the corresponding health implications. The studies of incidental nanoparticles generated in occupational settings lay the groundwork on which occupational health and safety protocols should be built.

SUBMITTER: Gonzalez-Pech NI

PROVIDER: S-EPMC7086472 | biostudies-literature | 2019 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Size, composition, morphology, and health implications of airborne incidental metal-containing nanoparticles.

Gonzalez-Pech Natalia I NI Stebounova Larissa V LV Ustunol Irem B IB Park Jae Hong JH Renee Anthony T T Peters Thomas M TM Grassian Vicki H VH

Journal of occupational and environmental hygiene 20190314 6

There is great concern regarding the adverse health implications of engineered nanoparticles. However, there are many circumstances where the production of incidental nanoparticles, i.e., nanoparticles unintentionally generated as a side product of some anthropogenic process, is of even greater concern. In this study, metal-based incidental nanoparticles were measured in two occupational settings: a machining center and a foundry. On-site characterization of substrate-deposited incidental nanopa ...[more]

PMID: 30570411

Similar Datasets

Project description:BackgroundSpecific characteristics of particulate matter (PM) responsible for associations with respiratory health observed in epidemiological studies are not well established. High correlations among, and differential measurement errors of, individual components contribute to this uncertainty.ObjectivesWe investigated which characteristics of PM have the most consistent associations with acute changes in respiratory function in healthy volunteers.MethodsWe used a semiexperimental design to accurately assess exposure. We increased exposure contrast and reduced correlations among PM characteristics by exposing volunteers at five different locations: an underground train station, two traffic sites, a farm, and an urban background site. Each of the 31 participants was exposed for 5 hr while exercising intermittently, three to seven times at different locations during March-October 2009. We measured PM10, PM2.5, particle number concentrations (PNC), absorbance, elemental/organic carbon, trace metals, secondary inorganic components, endotoxin content, gaseous pollutants, and PM oxidative potential. Lung function [FEV1 (forced expiratory volume in 1 sec), FVC (forced vital capacity), FEF25-75 (forced expiratory flow at 25-75% of vital capacity), and PEF (peak expiratory flow)] and fractional exhaled nitric oxide (FENO) were measured before and at three time points after exposure. Data were analyzed with mixed linear regression.ResultsAn interquartile increase in PNC (33,000 particles/cm3) was associated with an 11% [95% confidence interval (CI): 5, 17%] and 12% (95% CI: 6, 17%) FENO increase over baseline immediately and at 2 hr postexposure, respectively. A 7% (95% CI: 0.5, 14%) increase persisted until the following morning. These associations were robust and insensitive to adjustment for other pollutants. Similarly consistent associations were seen between FVC and FEV1 with PNC, NO2 (nitrogen dioxide), and NOx (nitrogen oxides).ConclusionsChanges in PNC, NO2, and NOx were associated with evidence of acute airway inflammation (i.e., FENO) and impaired lung function. PM mass concentration and PM10 oxidative potential were not predictive of the observed acute responses.

Project description:Nanoparticles are compounds of emerging concern with largely unknown risks for human and ecological health. It is crucial to evaluate their potential biological impact to prevent unintended adverse effects on human health and the environment. We analyzed the transcriptional effects of polyvinylpyrrolidone-coated silver nanoparticles (PVP-AgNPs) and silver nitrate (AgNO3) on the fathead minnow (Pimephales promelas) to understand their potential toxicity and adverse outcomes. We also tested the feasibility of the fathead minnow as an alternative species to elucidate potential adverse effects on humans. Fathead minnow females were exposed to either 4 Âµg/L of AgNO3 or 70 Âµg/L of PVP-AgNPs for 96h. Microarray analyses were performed on liver and brain. Functional analysis identified potential toxicity pathways and molecular initiating events (MIEs) that were confirmed with functional assays. Data suggested that AgNO3 and PVP-AgNPs had both common and distinct transcriptional effects. The nanoparticles were linked to neurotoxicity and oxidative stress, and identified as a dopamine receptor antagonist. Silver nitrate was also identified as a potential neurotoxicant and was confirmed as adrenergic and cannabinoid receptors antagonist. While silver nitrate and PVP-AgNPs were both potential neurotoxicants, they appeared to act through different MIEs. Fathead minnow is a promising alternative species to elucidate potential adverse effects of relevance to human health. We analyzed the transcriptional effects of polyvinylpyrrolidone-coated silver nanoparticles (PVP-AgNPs) and silver nitrate (AgNO3) on the fathead minnow (Pimephales promelas) to understand their potential toxicity and adverse outcomes. FHM were obtained from Aquatic Biosystems (Fort Collins, CO), held in aerated dechlorinated tap water and fed three times daily with ZeiglerÂ® AquaTox Feed Gardners, PA, USA). Fathead minnow females were exposed to either 4 Âµg/L of AgNO3 or 70 Âµg/L of PVP-AgNPs (Luna Innovations, Blackburn, VA) for 96h at 24Â°C Â± 1 with a 90% water change at 48 hours. Microarray analyses were performed on liver and brain.

Project description:Controlling the size distribution of nanoparticles is important for many applications and typically involves the use of ligands during synthesis. In this study, we show that the mechanism of size focusing involves a dependence of the growth rate on the size of the nanoparticles and the ligand coverage on the surface of the nanoparticles. To demonstrate these effects, we used in situ small angle X-ray scattering (SAXS) and population balance kinetic modeling (PBM) to investigate the evolution of size distribution during the synthesis of colloidal Pd metal nanoparticles. Despite temporal overlap of nucleation and growth, our in situ SAXS show size focusing of the distribution under different synthetic conditions (different concentrations of metal and ligand as well as solvent type). To understand the mechanism of size focusing using PBM, we systematically studied how the evolution of the nanoparticle size distribution is affected by nucleation rate, and dependence of the growth rate constant on ligand surface coverage, and size of the nanoparticles. We show that continuous nucleation contributes to size defocusing. However, continuous nucleation results in different reaction times for the nanoparticle population leading to time and size-dependent ligand surface coverage. Using density functional theory (DFT) calculations and Brønsted-Evans-Polanyi relations, we show that as the population grows, larger nanoparticles grow more slowly than smaller ones due to lower intrinsic activity and higher ligand coverage on the surface. Therefore, despite continuous nucleation, the faster growth of smaller nanoparticles in the population leads to size focusing. The size focusing behaviour (due to faster growth of smaller nanoparticles) was found to be model independent and similar results were demonstrated under different nucleation and growth pathways (e.g. growth via ion reduction on the surface and/or monomer addition). Our results provide a microscopic connection between kinetics and thermodynamics of nanoparticle growth and metal-ligand binding, and their effect on the size distribution of colloidal nanoparticles.

Project description:The article reveals for the first time the features of nanoparticle morphology, phase compositions, and their changes when heating FePt and CoPt nanoalloys. Nanoparticles were obtained by co-reduction of precursor solution mixtures with hydrazine hydrate. The features were found by a complex of methods of X-ray diffraction (in situ XRD and X-ray scattering), TEM HR, and cyclic voltammetry. In addition, adsorbometry results were obtained, and the stability of different nanocluster structures was calculated by the molecular dynamics method. There were only FCC solid solutions in the X-ray patterns of the FePt and CoPt nanoalloys. According to XRD, in the case of nanoparticle synthesis with Fe and Co content less than 10 at. %, the composition of solid solutions was close to or practically equal to the composition of the as-synthesized nanoparticles quantified by inductively coupled plasma optical emission spectrometry. For systems synthesis with Fe and Co content greater than the above, the solubility limits (SLs) of Fe and Co in Pt were set 11.4 ± 0.7 at. % and 17.5 ± 0.6 at. %, respectively. Therefore, there were non-registered XRD extra-phases (XRNDPh-1) in the systems when CFe,Co ≥ SL. This statement was supported by the results of TEM HR and X-ray scattering: the smallest nanocrystals (1-2 nm) and amorphous particles were found, which qualitatively agreed with the sorbometry and SAXS results. Molecular dynamics calculations of stability for FePt and CoPt alloys claimed the structures of the most stable phase corresponded to phase diagrams (A1 and L12). Specific peculiarities of the morphology and compositions of the solid solutions of nanoalloys were established: structural blockiness (domain) and composition heterogeneity, namely, platinum enrichment of internal (deep) layers and homogenization of the nanoalloy compositions at relatively low temperatures (130-200 °C). The suggested model of the formation of nanoalloys during the synthesis, qualitatively, was compliant with the results of electrochemical deposition of FePt films on the surface of various electrodes. When nanocrystals of solid solutions (C(Fe, Co) < SL) were heated above specific temperatures, there were phase transformations with the formation of two-phase regions, with solid solutions enriched with platinum or iron (non-registered XRD phase XRNDPh-2). The newly formed phase was most likely intermetallic compounds, FePt3, CoPt3. As a result of the study, the model was developed, taking into account the nanoscale of the particles: XRDPh (A1, FeaPt1-a) → XRDPh (A1, Fem×a-xPtm-m×a+x) + XRNDPh-2 (Fen×a+yPtn-n×a-y) (here, m + n = 1, m ≤ 1, n ≤ 1).

Dataset Information

Size, composition, morphology, and health implications of airborne incidental metal-containing nanoparticles.

Publications

Size, composition, morphology, and health implications of airborne incidental metal-containing nanoparticles.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets