Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced Lycopene Extraction from Tomato Peels by Optimized Mixed-Polarity Solvent Mixtures.

ABSTRACT: Mounting evidence from clinical and epidemiological studies suggests that lycopene, the most abundant carotenoid in tomatoes, may be beneficial in the prevention or treatment of some important diseases. Ripe tomato peels are the richest source of lycopene, but the use of conventional solvent extraction methods without pretreatment of the plant material results in very poor recovery. The reason lies in the localization of lycopene in the plant tissue and the low permeability of the latter to solvent molecules. In this paper, a mixture design procedure was used to formulate solvent mixtures allowing the recovery of lycopene from non-pretreated tomato peels. Two ternary systems were investigated: (a) n-hexane-ethanol-acetone and (b) ethyl lactate-ethanol-acetone. Optimization of the ternary mixture composition led to a recovery of over 90% of the lycopene present in the peels. The high extraction efficiency was explained in terms of lycopene affinity combined with the ability to swell the plant material. A tomato oleoresin with high antioxidant activity and a lycopene content of about 13% (w/w) was also produced. Overall, the results indicate that highly effective solvents for direct recovery of lycopene from tomato peels can be easily prepared by a mixture design approach.

SUBMITTER: Zuorro A

PROVIDER: S-EPMC7248986 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Dissolution DNP NMR with solvent mixtures: substrate concentration and radical extraction.

Project description:Dynamic nuclear polarization (DNP) followed by sudden sample dissolution, is a topic of active investigation owing to the method's unique prospects for the delivery of NMR spectra and images with unprecedented sensitivity. This experiment achieves hyperpolarization by the combined effects of electron-nuclear irradiation and cryogenic operation; the exploitation of these states occurs following a sudden melting and flushing of the resulting pellet from its original environment into a conventional, liquid-state setting. This melting and flushing usually demands using the equivalent of a few milliliters of hot solvent, a procedure which although well suited for in vivo studies leads to an excessive sample volume when considering typical analytical settings. The present study explores a way of reducing the ensuing dilution of the hyperpolarized analytes, by employing a combination of immiscible liquids for performing the melting and flushing. It is shown that suitable combinations of immiscible solvents - both in terms of their heat capacities and densities - allow one to melt the targeted cryogenic pellet and dissolve the hyperpolarized analytes in a fraction of the solvent hitherto required. By tailoring the resulting volume to the needs of a conventional 5mm NMR probe, a substantial sensitivity enhancement can be added to the hyperpolarization process. An extra benefit may arise from using radicals that preferentially dissolve in the immiscible organic phase, by way of a lengthening of the relaxation time of the investigated analytes. Examples of these principles are given, and further potential extensions of this approach are discussed.

| S-EPMC5040482 | biostudies-literature

Enhanced Z-isomerization of tomato lycopene through the optimal combination of food ingredients.

Project description:In tomatoes, most lycopene is present in the all-E-configuration and shows very low bioavailability, whereas the Z-isomers show higher bioavailability. Hence, for health reasons, it is expected that the ingestion of lycopene Z-isomers is preferable. Very recently, it was reported that onion and possibly garlic promoted thermal Z-isomerization of (all-E)-lycopene but there are no reports for other food ingredients. Here we show new food ingredients that enhance thermal Z-isomerization of lycopene in tomatoes and from the results, we guessed some causative components having the Z-isomerization promoting effect. A comprehensive investigation of food ingredients revealed that some vegetables (Allium sp., Brassica sp., and Raphanus sp.), shiitake mushroom (Lentinus edodes), and some edible seaweeds (Saccharina sp. and Ecklonia sp.) markedly promoted Z-isomerization of (all-E)-lycopene in tomato puree with heating at 80?°C for 1?h. Moreover, it was revealed that polysulfides, isothiocyanates, carbon disulfide, and iodine, which were commonly contained in the above food ingredients in considerable quantity, enhanced thermal Z-isomerization of (all-E)-lycopene. Our findings on the food ingredients and the food-derived catalysts having a carotenoid Z-isomerization promoting effect are important, not only for the food, drink, and dietary supplement manufacturing industries, but also for daily home cooking.

| S-EPMC6538647 | biostudies-literature

Pomegranate Peels and Seeds as a Source of Phenolic Compounds: Effect of Cultivar, By-Product, and Extraction Solvent.

Project description:The nutraceutical properties of Punica granatum L. are not restricted to the edible portion of the fruit but also to the peels and seeds, flowers, leaves, and tree bark. The recovery and valorization of the peel and seeds (ca. 50% of the whole fruit), besides the positive environmental impact, can be viewed as a source of natural bioactive compounds. Thus, the bioactive properties of extracts of pomegranate peel and seeds from Acco and Wonderful known cultivars, as well as of the novel Big Full cultivar, were evaluated. The dried and ground pomegranate by-products were submitted to a conventional solid/liquid extraction with ethanol/water mixtures (0%, 25%, 50%, and 75% of EtOH, v/v). The obtained extracts were characterized in terms of total phenolic compounds (TPC), total flavonoids (TF), and antioxidant activity (AA), determined by the DPPH radical scavenging activity and expressed as IC50 (half maximum inhibitory concentration). With the exception of the Acco cultivar, the extraction yield (EY) was higher for peels, whose extracts showed higher TPC, TF, and IC50 (lower AA). The extracts obtained from the by-products of the Big Full cultivar had a statistically higher overall bioactive potential (TPC: 0.36 mg GAE/mg extract; TF: 0.031 mg CATE/mg extract; IC50: 0.51 mg/mL) compared to the other two studied cultivars. Furthermore, the EY was enhanced by solvents richer in ethanol (50-75%), allowing obtaining extracts richer in TPC and TF with higher AA. Finally, it was shown that EY combined with bioactive data allowed a satisfactory principal component unsupervised differentiation of the pomegranate extracts according to the type of by-product used.

| S-EPMC9314001 | biostudies-literature

Nonaqueous Solvent Extraction for Enhanced Metal Separations: Concept, Systems, and Mechanisms.

Project description:Efficient and sustainable separation of metals is gaining increasing attention, because of the essential roles of many metals in sustainable technologies for a climate-neutral society, such as rare earths in permanent magnets and cobalt, nickel, and manganese in the cathode materials of lithium-ion batteries. The separation and purification of metals by conventional solvent extraction (SX) systems, which consist of an organic phase and an aqueous phase, has limitations. By replacing the aqueous phase with other polar solvents, either polar molecular organic solvents or ionic solvents, nonaqueous solvent extraction (NASX) largely expands the scope of SX, since differences in solvation of metal ions lead to different distribution behaviors. This Review emphasizes enhanced metal extraction and remarkable metal separations observed in NASX systems and discusses the effects of polar solvents on the extraction mechanisms according to the type of polar solvents and the type of extractants. Furthermore, the considerable effects of the addition of water and complexing agents on metal separations in terms of metal ion solvation and speciation are highlighted. Efforts to integrate NASX into metallurgical flowsheets and to develop closed-loop solvometallurgical processes are also discussed. This Review aims to construct a framework of NASX on which many more studies on this topic, both fundamental and applied, can be built.

| S-EPMC8662634 | biostudies-literature

Homopolymer micelles in heterogeneous solvent mixtures.

Project description:Amphiphilic homopolymers containing a hydrophilic and a hydrophobic functionality in each monomer unit have been shown to form polar or apolar containers depending on the solvent environment. When presented with a mixture of solvents, these polymeric containers are capable of releasing certain guest molecules. The fundamental mechanism behind these properties is investigated, and the utility of these assemblies in separations has been demonstrated with an example.

| S-EPMC2532981 | biostudies-literature

Assessing Green Methods for Pectin Extraction from Waste Orange Peels.

Project description:In this work, we assess three different methods for the extraction of pectin from waste orange peels, using water as extracting solvent. "Hot-water", Rapid Solid Liquid Dynamic (RSLD) and microwave-assisted extractions have been compared and evaluated in terms of amount and quality of extracted pectin, as well as embodied energy. This analysis provides useful guidelines for pectin production from food waste according to green procedures, enabling the identification of acidic "hot-water" as the most sustainable extraction route.

| S-EPMC8004147 | biostudies-literature

Predicting the Solubility of Pharmaceutical Cocrystals in Solvent/Anti-Solvent Mixtures.

Project description:In this work, the solubilities of pharmaceutical cocrystals in solvent/anti-solvent systems were predicted using PC-SAFT in order to increase the efficiency of cocrystal formation processes. Modeling results and experimental data were compared for the cocrystal system nicotinamide/succinic acid (2:1) in the solvent/anti-solvent mixtures ethanol/water, ethanol/acetonitrile and ethanol/ethyl acetate at 298.15 K and in the ethanol/ethyl acetate mixture also at 310.15 K. The solubility of the investigated cocrystal slightly increased when adding small amounts of anti-solvent to the solvent, but drastically decreased for high anti-solvent amounts. Furthermore, the solubilities of nicotinamide, succinic acid and the cocrystal in the considered solvent/anti-solvent mixtures showed strong deviations from ideal-solution behavior. However, by accounting for the thermodynamic non-ideality of the components, PC-SAFT is able to predict the solubilities in all above-mentioned solvent/anti-solvent systems in good agreement with the experimental data.

| S-EPMC6273375 | biostudies-literature

Competitive solvent-molecule interactions govern primary processes of diphenylcarbene in solvent mixtures.

Project description:Photochemical reactions in solution often proceed via competing reaction pathways comprising intermediates that capture a solvent molecule. A disclosure of the underlying reaction mechanisms is challenging due to the rapid nature of these processes and the intricate identification of how many solvent molecules are involved. Here combining broadband femtosecond transient absorption and quantum mechanics/molecular mechanics simulations, we show for one of the most reactive species, diphenylcarbene, that the decision-maker is not the nearest solvent molecule but its neighbour. The hydrogen bonding dynamics determine which reaction channels are accessible in binary solvent mixtures at room temperature. In-depth analysis of the amount of nascent intermediates corroborates the importance of a hydrogen-bonded complex with a protic solvent molecule, in striking analogy to complexes found at cryogenic temperatures. Our results show that adjacent solvent molecules take the role of key abettors rather than bystanders for the fate of the reactive intermediate.

| S-EPMC5059701 | biostudies-other

Coordinated transcriptional regulation of the carotenoid biosynthesis contributes to fruit lycopene content in high-lycopene tomato genotypes.

Project description:Lycopene content in tomato fruit is largely under genetic control and varies greatly among genotypes. Continued improvement of lycopene content in elite varieties with conventional breeding has become challenging, in part because little is known about the underlying molecular mechanisms in high-lycopene tomatoes (HLYs). We collected 42 HLYs with different genetic backgrounds worldwide. High-performance liquid chromatography (HPLC) analysis revealed lycopene contents differed among the positive control wild tomato Solanum pimpinellifolium, HLYs, the normal lycopene cultivar "Moneymaker", and the non-lycopene cultivar NC 1Y at the pink and red ripe stages. Real-time RT-PCR analysis of expression of the 25 carotenoid biosynthesis pathway genes of each genotype showed a significantly higher expression in nine upstream genes (GGPPS1, GGPPS2, GGPPS3, TPT1, SSU II, PSY2, ZDS, CrtISO and CrtISO-L1 but not the well-studied PSY1, PDS and Z-ISO) at the breaker and/or red ripe stages in HLYs compared to Moneymaker, indicating a higher metabolic flux flow into carotenoid biosynthesis pathway in HLYs. Further conversion of lycopene to carotenes may be prevented via the two downstream genes (β-LCY2 and ε-LCY), which had low-abundance transcripts at either or both stages. Additionally, the significantly higher expression of four downstream genes (BCH1, ZEP, VDE, and CYP97C11) at either or both ripeness stages leads to significantly lower fruit lycopene content in HLYs than in the wild tomato. This is the first systematic investigation of the role of the complete pathway genes in regulating fruit lycopene biosynthesis across many HLYs, and enables tomato breeding and gene editing for increased fruit lycopene content.

| S-EPMC9160729 | biostudies-literature

Mixed-Solvent Polarity-Assisted Phase Transition of Cesium Lead Halide Perovskite Nanocrystals with Improved Stability at Room Temperature.

Project description:Cesium lead halide perovskite nanocrystals (NCs) have attracted enormous interest in light-emitting diode, photodetector and low-threshold lasing application in terms of their unique optical and electrical performance. However, little attention has been paid to other structures associated with CsPbBr3, such as CsPb2Br5. Herein, we realize a facile method to prepare dual-phase NCs with improved stability against polar solvents by replacing conventional oleylamine with cetyltrimethyl ammonium bromide (CTAB) in the reprecipitation process. The growth of NCs can be regulated with different ratios of toluene and ethanol depending on solvent polarity, which not only obtains NCs with different sizes and morphologies, but also controls phase transition between orthorhombic CsPbBr3 and tetragonal CsPb2Br5. The photoluminescence (PL) and defect density calculated exhibit considerable solvent polarity dependence, which is ascribed to solvent polarity affecting the ability of CTAB to passivate surface defects and improve stoichiometry in the system. This new synthetic method of perovskite material will be helpful for further studies in the field of lighting and detectors.

| S-EPMC6915538 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data