Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

NiYAl-Derived Nanoporous Catalysts for Dry Reforming of Methane.

ABSTRACT: Dry reforming of methane can be used for suppressing the rapid growth of greenhouse gas emissions. However, its practical implementation generally requires high temperatures. In this study, we report an optimal catalyst for low-temperature dry reforming of methane with high carbon coking resistance synthesized from NiYAl alloy. A facile two-step process consisting of preferential oxidation and leaching was utilized to produce structurally robust nanoporous Ni metal and Y oxides from NiYAl4. The catalyst exhibited an optimal carbon balance (0.96) close to the ideal value of 1.0, indicating the optimized dry reforming pathway. This work proposes a facile route of the structural control of active metal/oxide sites for realizing highly active catalysts with long-term durability.

SUBMITTER: Imada S

PROVIDER: S-EPMC7254345 | biostudies-literature | 2020 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

NiYAl-Derived Nanoporous Catalysts for Dry Reforming of Methane.

Imada Syota S Peng Xiaobo X Cai Zexing Z Najib Abdillah Sani Bin Mohd ASBM Miyauchi Masahiro M Abe Hideki H Fujita Takeshi T

Materials (Basel, Switzerland) 20200427 9

Dry reforming of methane can be used for suppressing the rapid growth of greenhouse gas emissions. However, its practical implementation generally requires high temperatures. In this study, we report an optimal catalyst for low-temperature dry reforming of methane with high carbon coking resistance synthesized from NiYAl alloy. A facile two-step process consisting of preferential oxidation and leaching was utilized to produce structurally robust nanoporous Ni metal and Y oxides from NiYAl4< ...[more]

PMID: 32349430

Similar Datasets

Nanoporous Nickel Composite Catalyst for the Dry Reforming of Methane.

Project description:The development of efficient catalysts with high activities and durabilities for use in the dry reforming of methane (DRM) is desirable but challenging. We report the development of a nanoporous nickel composite (nanoporous Ni/Y2O3) via a facile one-step dealloying technique, for use in the DRM. Focusing on the low-temperature DRM, our composite possessed remarkable activity and durability against coking compared with conventional particle-based Ni catalysts. This was attributed to the aluminum oxides present on the Ni surface, which suppress pore coarsening. In addition, the inert bundled Y2O3 nanowires are suitable for use as substrates for nanoporous Ni.

| S-EPMC6643422 | biostudies-literature

Microwave Heating-Assisted Catalytic Dry Reforming of Methane to Syngas.

Project description:Natural gas is a robust and environmentally friendlier alternative to oil resources for energy and chemicals production. However, gas is distributed globally within shales and hydrates, which are generally remote and difficult reserves to produce. The accessibility, transportation, and distribution, therefore, bring major capital costs. With today's low and foreseen low price of natural gas, conversion of natural gas to higher value-added chemicals is highly sought by industry. Dry reforming of methane (DRM) is a technology pathway to convert two critical greenhouse gas components, CH4 and CO2, to syngas, a commodity chemical feedstock. To date, the challenges of carbon deposition on the catalyst and evolution of secondary gas-phase products have prevented the commercial application of the DRM process. The recent exponential growth of renewable electricity resources, wind and solar power, provides a major opportunity to activate reactions by harnessing low-cost carbon-free energy via microwave-heating. This study takes advantage of differences in dielectric properties of materials to enable selective heating by microwave to create a large thermal gradient between a catalyst surface and the gas phase. Consequently, the reaction kinetics at the higher temperature catalyst surface are promoted while the reactions of lower temperature secondary gas-phase are reduced.

| S-EPMC5997706 | biostudies-literature

Experimental and computational investigation on underlying factors promoting high coke resistance in NiCo bimetallic catalysts during dry reforming of methane.

Project description:Global warming remains one of the greatest challenges. One of the most prominent solutions is to close the carbon cycle by utilizing the greenhouse gas: CO2, and CH4, as a feedstock via the dry reforming of methane (DRM). This work provided an insight into how the NiCo bimetallic catalyst can perform with high stability against coking during DRM compared to the Ni and Co monometallic catalysts, in which the experimental and computational techniques based on density functional theory were performed. It was found that the high stability against coking found on the NiCo surface can be summarized into two key factors: (1) the role of Co weakening the bond between a Ni active site and coke (2) significantly high surface coke diffusion rate on NiCo. Moreover, the calculation of the surface fraction weighted rate of coke diffusion which modeled the real NiCo particle into four regions: Ni-dominant, Co-dominant, NiCo-dominant, and the mixed region consisting a comparable amount of the former there regions, have shown that the synthesis of a NiCo particle should be dominated with NiCo region while keeping the Ni-dominant, and Co-dominant regions to be as low as possible to facilitate coke diffusion and removal. Thus, to effectively utilize the coke-resistant property of NiCo catalyst for DRM, one should together combine its high coke diffusion rate with coke removal mechanisms such as oxidation or hydrogenation, especially at the final diffusion site, to ensure that there will not be enough coke at the final site that will cause back-diffusion.

| S-EPMC7804276 | biostudies-literature

Highly active dry methane reforming catalysts with boosted in situ grown Ni-Fe nanoparticles on perovskite via atomic layer deposition.

Project description:With the need for more stable and active metal catalysts for dry reforming of methane, in situ grown nanoparticles using exsolution are a promising approach. However, in conventional exsolution, most nanoparticles remain underneath the surface because of the sluggish diffusion rate of cations. Here, we report the atomic layer deposition (ALD)-combined topotactic exsolution on La0.6Sr0.2Ti0.85Ni0.15O3-δ toward developing active and durable catalysts. The uniform and quantitatively controlled layer of Fe via ALD facilitates the topotactic exsolution, increasing finely dispersed nanoparticles. The introduction of Fe2O3 yields the formation of Ni-Fe alloy owing to the spontaneous alloy formation energy of -0.43 eV, leading to an enhancement of the catalytic activity for dry methane reforming with a prolonged stability of 410 hours. Overall, the abundant alloy nanocatalysts via ALD mark an important step forward in the evolution of exsolution and its application to the field of energy utilization.

| S-EPMC7449676 | biostudies-literature

Reutilizing Methane Reforming Spent Catalysts as Efficient Overall Water-Splitting Electrocatalysts.

Project description:It is extremely prudent and highly challenging to design a greener bifunctional electrocatalyst that shows effective electrocatalytic activity and high stability toward electrochemical water splitting. As several hundred tons of catalysts are annually deactivated by deposition of carbon, herein, we came up with a strategy to reutilize spent methane reforming catalysts that were deactivated by the formation of graphitic carbon (GC) and carbon nanofibers (CNF). An electrocatalyst was successfully synthesized by in situ deposition of noble metal-free MoS2 over spent catalysts via a hydrothermal method that showed exceptional performance regarding the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). At 25 mA cm-2, phenomenal OER overpotentials (η25) of 128 and 154 mV and modest HER overpotentials of 186 and 207 mV were achieved for MoS2@CNF and MoS2@GC, respectively. Moreover, OER Tafel slopes of 41 and 71 mV dec-1 and HER Tafel slopes of 99 and 107 mV dec-1 were obtained for MoS2@CNF and MoS2@GC, respectively. Furthermore, the synthesized catalysts exhibited good long-term durability for about 18 h at 100 μA cm-2 with unnoticeable changes in the linear sweep voltammetry (LSV) curve of the HER after 1000 cycles. The carbon on the spent catalyst increased the conductivity, while MoS2 enhanced the electrocatalytic activity; hence, the synergistic effect of both materials resulted in enhanced electrocatalysts for overall water splitting. This work of synthesizing enhanced nanostructured electrocatalysts with minimal usage of inexpensive MoS2 gives a rationale for engineering potent greener electrocatalysts.

| S-EPMC8388002 | biostudies-literature

Atomically dispersed nickel as coke-resistant active sites for methane dry reforming.

Project description:Dry reforming of methane (DRM) is an attractive route to utilize CO2 as a chemical feedstock with which to convert CH4 into valuable syngas and simultaneously mitigate both greenhouse gases. Ni-based DRM catalysts are promising due to their high activity and low cost, but suffer from poor stability due to coke formation which has hindered their commercialization. Herein, we report that atomically dispersed Ni single atoms, stabilized by interaction with Ce-doped hydroxyapatite, are highly active and coke-resistant catalytic sites for DRM. Experimental and computational studies reveal that isolated Ni atoms are intrinsically coke-resistant due to their unique ability to only activate the first C-H bond in CH4, thus avoiding methane deep decomposition into carbon. This discovery offers new opportunities to develop large-scale DRM processes using earth abundant catalysts.

| S-EPMC6858327 | biostudies-literature

Morphology-Dependent Catalytic Activity of Ru/CeO? in Dry Reforming of Methane.

Project description:Three morphology-controlled CeO?, namely nanorods (NRs), nanocubes (NCs), and nanopolyhedra (NPs), with different mainly exposed crystal facets of (110), (100), and (111), respectively, have been used as supports to prepare Ru (3 wt.%) nanoparticle-loaded catalysts. The catalysts were characterized by H?-temperature programmed reduction (H?-TPR), CO? temperature programmed desorption (CO-TPD), N? adsorption?desorption, X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (XDS). The characterization results showed that CeO?-NRs, CeO?-NCs, and CeO?-NPs mainly expose (110), (100) and (111) facets, respectively. Moreover, CeO?-NRs and CeO?-NCs present higher oxygen vacancy concentration than CeO?-NPs. In the CO? reforming of methane reaction, Ru/CeO?-NR and Ru/CeO?-NC catalysts showed better catalytic performance than Ru/CeO?-NPs, indicating that the catalysts with high oxygen vacancy concentration are beneficial for promoting catalytic activity.

| S-EPMC6385116 | biostudies-literature

High Coke-Resistance Pt/Mg1-xNixO Catalyst for Dry Reforming of Methane.

Project description:A highly active and stable nano structured Pt/Mg1-xNixO catalysts was developed by a simple co-precipitation method. The obtained Pt/Mg1-xNixO catalyst exhibited cubic structure nanocatalyst with a size of 50-80 nm and realized CH4 and CO2 conversions as high as 98% at 900°C with excellent stability in the dry reforming of methane. The characterization of catalyst was performed using various kinds of analytical techniques including XRD, BET, XRF, TPR-H2, TGA, TEM, FESEM, FT-IR, and XPS analyses. Characterization of spent catalyst further confirms that Pt/Mg1-xNixO catalyst has high coke-resistance for dry reforming. Thus, the catalyst demonstrated in this study, offers a promising catalyst for resolving the dilemma between dispersion and reducibility of supported metal, as well as activity and stability during high temperature reactions.

| S-EPMC4706417 | biostudies-literature

Coking-resistant dry reforming of methane over Ni/γ-Al2O3 catalysts by rationally steering metal-support interaction.

Project description:The coking issue is the main challenge for dry reforming of methane (DRM) over Ni-based catalysts. Herein, we excavate the reasons for the enhanced coking resistance of the bounded Ni over the free state Ni in Ni/γ-Al2O3 catalysts for DRM. Rational metal-support interaction of the bounded Ni would facilitate desorption of CO, thus suppressing CO disproportionation and decreasing carbon deposition. The higher activity of the bounded Ni is ascribed to better methane cracking ability, stronger adsorption, and activation of CO2 by forming polydentate carbonate. The better activation of CO2 over the bounded Ni would also contribute to the gasification of formed coke. We gain an insight into the anti-coking mechanism of DRM determined by metal-support interaction in Ni/γ-Al2O3 catalysts through mechanistic studies. It is believed that our findings would enlighten the design of more efficient catalysts for DRM.

| S-EPMC8261659 | biostudies-literature

Experimental Study on Dry Reforming of Biogas for Syngas Production over Ni-Based Catalysts.

Project description:Syngas production from dry reforming of biogas (DRB) is studied experimentally in this work. Ni/Al2O3, Pt/Al2O3, and Pt-Ni/Al2O3 are used as catalysts to examine the effect of CO2 content in biogas and H2O addition on DRB performance for reaction temperatures in the 600–800 °C range. It is found that the bimetallic Pt–Ni catalyst exhibits the best activity and thermal stability among the three types of catalysts studied due to better carbon deposition resistance. Because CO2 functions as the oxidant in combustion, CH4 conversion is enhanced when the biogas contains more CO2. One hundred percent CO2 conversion can be reached for biogas containing a less amount of CO2 at high temperatures. With H2O addition in DRB, the steam reforming of methane (SRM) reaction is the dominant reaction, resulting in higher H2 and CO yields with biogas containing lesser amounts of CO2. However, lower CH4 conversion and negative CO2 conversion do result. With higher CO2 content in the biogas, higher CH4 and CO2 conversions can be obtained. Lower yields of H2 and CO are obtained due to less SRM dominance. With H2O addition in biogas, the H2/CO ratio with a value greater than 1 can be obtained from DRB. It is also found that the H2/CO ratio with a value of 2.1 can be obtained for reactant composition with a molar ratio of CH4/CO2/H2O = 1:0.25:1 and reaction temperature of 800 °C.

| S-EPMC6921260 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data