Dataset Information

Weight-of-evidence approach to identify regionally representative sites for air-quality monitoring network: Satellite data-based analysis.

ABSTRACT: The methodology discussed in Lekinwala et al., 2020, hereinafter referred to as the 'parent article', is used to setup a nation-wide network for background PM2.5 measurement at strategic locations, optimally placing sites to obtain maximum regionally representative PM2.5 concentrations with minimum number of sites. Traditionally, in-situ PM2.5 measurements are obtained for several potential sites and compared to identify the most regionally representative sites [4], Wongphatarakul et al., 1998) at the location. The 'parent article' proposes the use of satellite-derived proxy for aerosol (Aerosol Optical Depth, AOD) data in the absence of in-situ PM2.5 measurements. This article focuses on the details about satellite-data processing which forms part of the methodology discussed in the 'parent article'. Following are some relevant aspects:•High resolution AOD is retrieved from Moderate Resolution Imaging Spectroradiometer (MODIS) instruments aboard NASA's Aqua and Terra satellite using Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm. The data is stored as grids of size 1200 × 1200 and a total of seven such grids cover the Indian land mass. These grids were merged, regridded and multiplied by conversion factors from GEOS-Chem Chemical Transport Model to obtain PM2.5 values. Standard set of tools like CDO and NCL are used to manipulate the satellite-data (*.nc files).•The PM2.5 values are subjected to various statistical analysis using metrics like coefficient of divergence (CoD), Pearson correlation coefficient (PCC) and mutual information (MI).•Computations for CoD, MI are performed using Python codes developed in-house while a function in NumPy module of Python was used for PCC calculations.

SUBMITTER: Lekinwala NL

PROVIDER: S-EPMC7317679 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Weight-of-evidence approach to identify regionally representative sites for air-quality monitoring network: Satellite data-based analysis.

Lekinwala Nirav L NL Bharadwaj Ankur A Sunder Raman Ramya R Bhushan Mani M Bali Kunal K Dey Sagnik S

MethodsX 20200604

The methodology discussed in Lekinwala et al., 2020, hereinafter referred to as the 'parent article', is used to setup a nation-wide network for background PM2.5 measurement at strategic locations, optimally placing sites to obtain maximum regionally representative PM2.5 concentrations with minimum number of sites. Traditionally, in-situ PM2.5 measurements are obtained for several potential sites and compared to identify the most regionally representative sites [ ...[more]

PMID: 32612938

Similar Datasets

Project description:With the ongoing challenge of air pollution posing serious health and environmental threats, particularly in rapidly industrializing regions, accurate forecasting and effective pollutant identification are crucial for enhancing public health and ecological stability. This study aimed to optimize air quality management through the prediction of the Air Quality Index (AQI) and identification of air pollutants. Our study spans nine representative cities (Hohhot, Yinchuan, Lanzhou, Beijing, Taiyuan, Xi'an, Shanghai, Nanjing, Wuhan) in China, with data collected from January 1, 2015, to November 30, 2021. We proposed a new model for daily AQI prediction, termed VMD-CSA-CNN-LSTM, which employed advanced machine learning techniques, including convolutional neural networks (CNN) and long short-term memory (LSTM) networks, and leveraged the chameleon swarm algorithm (CSA) for hyperparameter optimization, integrated through a variational mode decomposition approach. The model was developed using data from Lanzhou, with a split ratio of 8:1:1 into training, validation, and test sets, achieving an RMSE of 2.25, MAPE of 0.02, adjusted R-squared of 98.91%, and training efficiency of 5.31%. The model was further externally validated in the other eight cities, yielding comparable results, with an adjusted R-squared above 96%, MAPE below 0.1, and RMSE below 7.5. Additionally, we employed a random forest algorithm to identify the primary pollutants contributing to AQI levels. Our results indicated that PM2.5 was the most significant pollutant in Beijing, Taiyuan, and Xi'an, while PM10 was dominant in Hohhot, Yinchuan, and Lanzhou. In Shanghai, Nanjing, and Wuhan, both PM2.5 and PM10 were critical, with ozone also identified as a major air pollutant. This study not only advances the predictive accuracy of AQI models but also aids policymakers by providing a reliable tool for air quality management and strategic planning aimed at pollution reduction. The integration of these advanced computational techniques into environmental monitoring practices offers a promising avenue for enhancing air quality and mitigating pollution-related risks.

Project description:Analyses of the relationships between climate, air substances and health usually concentrate on urban environments because of increased urban temperatures, high levels of air pollution and the exposure of a large number of people compared to rural environments. Ongoing urbanization, demographic ageing and climate change lead to an increased vulnerability with respect to climate-related extremes and air pollution. However, systematic analyses of the specific local-scale characteristics of health-relevant atmospheric conditions and compositions in urban environments are still scarce because of the lack of high-resolution monitoring networks. In recent years, low-cost sensors (LCS) became available, which potentially provide the opportunity to monitor atmospheric conditions with a high spatial resolution and which allow monitoring directly at vulnerable people. In this study, we present the atmospheric exposure low-cost monitoring (AELCM) system for several air substances like ozone, nitrogen dioxide, carbon monoxide and particulate matter, as well as meteorological variables developed by our research group. The measurement equipment is calibrated using multiple linear regression and extensively tested based on a field evaluation approach at an urban background site using the high-quality measurement unit, the atmospheric exposure monitoring station (AEMS) for meteorology and air substances, of our research group. The field evaluation took place over a time span of 4 to 8 months. The electrochemical ozone sensors (SPEC DGS-O3: R2: 0.71-0.95, RMSE: 3.31-7.79 ppb) and particulate matter sensors (SPS30 PM1/PM2.5: R2: 0.96-0.97/0.90-0.94, RMSE: 0.77-1.07 µg/m3/1.27-1.96 µg/m3) showed the best performances at the urban background site, while the other sensors underperformed tremendously (SPEC DGS-NO2, SPEC DGS-CO, MQ131, MiCS-2714 and MiCS-4514). The results of our study show that meaningful local-scale measurements are possible with the former sensors deployed in an AELCM unit.

Project description:Exposure to vehicular emissions has been linked to numerous adverse health effects. In response to the arising concerns, near-road monitoring is conducted to better characterize the impact of mobile source emissions on air quality and exposure in the near-road environment. An intensive measurement campaign measured traffic-related air pollutants (TRAPs) and related data (e.g., meteorology, traffic, regional air pollutant levels) in Atlanta, along one of the busiest highway corridors in the US. Given the complexity of the near-road environment, the study aimed to compare two near-road monitors, located in close proximity to each other, to assess how observed similarities and differences between measurements at these two sites inform the siting of other near-road monitoring stations. TRAP measurements, including carbon monoxide (CO) and nitrogen dioxide (NO2), are analyzed at two roadside monitors in Atlanta, GA located within 325m of each other. Both meteorological and traffic conditions were monitored to assess the temporal impact of these factors on traffic-related pollutant concentrations. The meteorological factors drove the diurnal variability of primary pollutant concentration more than traffic count. In spite of their proximity, while the CO and NO2 concentrations were correlated with similar diurnal variations, pollutant concentrations at the two closely sited monitors differed, likely due to the differences in the siting characteristics reducing the dispersion of the primary emissions out of the near-road environment. Overall, the near-road TRAP concentrations at all sites were not as elevated as seen in prior studies, supporting that decreased vehicle emissions have led to significant reductions in TRAP levels, even along major interstates. Further, the differences in the observed levels show that use of single near-road observations will not capture pollutant levels representative of the local near-road environment and that additional approaches (e.g., air quality models) are needed to characterize exposures.

Dataset Information

Weight-of-evidence approach to identify regionally representative sites for air-quality monitoring network: Satellite data-based analysis.

Publications

Weight-of-evidence approach to identify regionally representative sites for air-quality monitoring network: Satellite data-based analysis.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets