Dataset Information

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State.

ABSTRACT: For cementitious materials, electrical resistivity is often used in the study of the cement hydration process at early age, as one of the few indicators that can be continuously and non-destructively monitored. Variation characteristics of resistivity are widely reported to interact with the early-age performance of cement paste, such as hydration kinetics parameters and setting time. However, there is no reasonable mathematical model to predict the resistivity at early ages, especially within the first 24 h, due to significant changes in the porosity and degree of saturation. In this work, a mathematical model was developed by considering the partially saturated state and density change of C-S-H (calcium silicate hydrate). To verify the model, two experimental methods were chosen, including the non-contact electrical resistivity test and isothermal calorimetry test. The hydration heat and resistivity of cement paste with a water-cement ratio of 0.35 and 0.45 were continuously monitored for 3 days. In the resistivity test, embedded temperature sensors were used to monitor the internal temperature and temperature correction was treated carefully in order to obtain accurate data. The test results prove that the mathematical model can accurately predict electrical resistivity and describe the saturation state of early-age cement pastes under sealed curing.

SUBMITTER: Tian Y

PROVIDER: S-EPMC7435884 | biostudies-literature | 2020 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State.

Tian Ye Y Xu Xin X Ji Haodong H Tian Zushi Z Jin Xianyu X Jin Nanguo N Yan Dongming D Tang Shengwen S

Materials (Basel, Switzerland) 20200724 15

For cementitious materials, electrical resistivity is often used in the study of the cement hydration process at early age, as one of the few indicators that can be continuously and non-destructively monitored. Variation characteristics of resistivity are widely reported to interact with the early-age performance of cement paste, such as hydration kinetics parameters and setting time. However, there is no reasonable mathematical model to predict the resistivity at early ages, especially within t ...[more]

PMID: 32722252

Similar Datasets

Project description:Laboratory measurements of capillary pressure (Pc) and the electrical resistivity index (RI) of reservoir rocks are used to calibrate well logging tools and to determine reservoir fluid distribution. Significant studies on the methods and factors affecting these measurements in rocks containing oil, gas, and water are adequately reported in the literature. However, with the advent of chemical enhanced oil recovery (EOR) methods, surfactants are mixed with injection fluids to generate foam to enhance the gas injection process. Foam is a complex and non-Newtonian fluid whose behavior in porous media is different from conventional reservoir fluids. As a result, the effect of foam on Pc and the reliability of using known rock models such as the Archie equation to fit experimental resistivity data in rocks containing foam are yet to be ascertained. In this study, we investigated the effect of foam on the behavior of both Pc and RI curves in sandstone and carbonate rocks using both porous plate and two-pole resistivity methods at ambient temperature. Our results consistently showed that for a given water saturation (Sw), the RI of a rock increases in the presence of foam than without foam. We found that, below a critical Sw, the resistivity of a rock containing foam continues to rise rapidly. We argue, based on knowledge of foam behavior in porous media, that this critical Sw represents the regime where the foam texture begins to become finer, and it is dependent on the properties of the rock and the foam. Nonetheless, the Archie model fits the experimental data of the rocks but with resulting saturation exponents that are higher than conventional gas-water rock systems. The degree of variation in the saturation exponents between the two fluid systems also depends on the rock and fluid properties. A theory is presented to explain this phenomenon. We also found that foam affects the saturation exponent in a similar way as oil-wet rocks in the sense that they decrease the cross-sectional area of water available in the pores for current flow. Foam appears to have competing and opposite effects caused by the presence of clay, micropores, and conducting minerals, which tend to lower the saturation exponent at low Sw. Finally, the Pc curve is consistently lower in foam than without foam for the same Sw.

Dataset Information

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State.

Publications

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets