Development of a qualitative real-time RT-PCR assay for the detection of SARS-CoV-2: A guide and case study in setting up an emergency-use, laboratory-developed molecular assay.
Ontology highlight
ABSTRACT:
SUBMITTER: Anahtar MN
PROVIDER: S-EPMC7480066 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Developing and deploying new diagnostic tests are difficult, but the need to do so in response to a rapidly emerging pandemic such as COVID-19 is crucially important. During a pandemic, laboratories play a key role in helping healthcare providers and public health authorities detect active infection, a task most commonly achieved using nucleic acid-based assays. While the landscape of diagnostics is rapidly evolving, PCR remains the gold-standard of nucleic acid-based diagnostic assays, in part due to its reliability, flexibility and wide deployment. To address a critical local shortage of testing capacity persisting during the COVID-19 outbreak, our hospital set up a molecular-based laboratory developed test (LDT) to accurately and safely diagnose SARS-CoV-2. We describe here the process of developing an emergency-use LDT, in the hope that our experience will be useful to other laboratories in future outbreaks and will help to lower barriers to establishing fast and accurate diagnostic testing in crisis conditions.
| S-EPMC8311084 | biostudies-literature
Project description:BackgroundHuman adenoviruses are common causes of community-acquired respiratory tract and enteric infections. Severe disseminated infections with high mortality rates may be seen in immunocompromised individuals. An accurate and cost-effective quantitative assay is essential not only for laboratory diagnosis of adenoviral infections, but also for monitoring of response to antiviral treatment. The diagnostic performance of an in-house quantitative polymerase chain reaction assay was compared to a commercial system.MethodsThe analytical sensitivity, specificity, linearity, precision and accuracy of an in-house adenovirus quantitative polymerase chain reaction assay were evaluated against the RealStar® Adenovirus PCR Kit (Altona Diagnostics GmbH, Hamburg, Germany), using 122 clinical specimens and 18 proficiency testing samples.ResultsLinear regression analysis of the quantitative results by the in-house assay showed the dynamic range from 2.60 to 9 log10 (plasma) and 2.94 to 9 log10 (viral transport medium) copies/mL, with the coefficient of determination (R2) of 0.996 and 0.998, respectively. A dilution series demonstrated the limits of detection and lower limits of quantification for plasma were 2.06 log10 and 2.60 log10 copies/mL and those for viral transport medium were 2.31 log10 and 2.94 log10 copies/mL respectively. The precision of the in-house assay was highly reproducible among runs with coefficients of variance ranging from 0.07 to 3.21% for plasma and 0.17% to 2.11% for viral transport medium. A comparison of 52 matched samples showed an excellent correlation between the quantitative viral loads measured by the in-house assay and the RealStar® Adenovirus PCR Kit (R2 = 0.984), with an average bias of - 0.16 log10 copies/mL.ConclusionsThe in-house adenovirus assay is a sensitive and reliable assay with lower cost for the detection and quantification of adenoviral DNA when compared to the RealStar® Adenovirus PCR Kit.
| S-EPMC6161464 | biostudies-literature
Project description:BackgroundReverse transcription-polymerase chain reaction (RT-PCR) is an extremely common clinical method for detecting pathogens, particularly for emerging infectious diseases such as the new coronavirus disease (COVID-19). Currently, detection of the RNA from the novel coronavirus SARS-CoV-2 is the gold standard for establishing a COVID-19 diagnosis. This study evaluates the characteristic performance of the analytical system in a clinical laboratory.MethodsA commercial SARS-CoV-2 RNA RT-PCR Kit used in a clinical laboratory is assessed based on ISO 15189 verification requirements. A multiple real-time RT-PCR assay for the RdRP, N, and E genes in SARS-CoV-2 is verified.ResultsThe analytical system exhibits good analytical sensitivity (1000 copies/mL) and specificity (100%); however, the values of 86.7% and 100% for analytical accuracy deserved attention, compared with two other types of methods. Overall, the kit is potentially useful for SARS-CoV-2 diagnostic testing and meets the verification requirements.ConclusionCompliance with international standards, such as ISO 15189, is valuable for clinical laboratories and for improving laboratory medicine quality and safety. Normalization is essential for obtaining reliable results from the SARS-CoV-2 RNA RT-PCR assay. This study aims to develop an improved SARS-CoV-2 verification framework compared with traditional molecular diagnostic methods, given the urgency of implementing new assays in clinical laboratories.
| S-EPMC7435359 | biostudies-literature
Project description:Background and aimsImmediate detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is critical for preventing the spread of coronavirus disease 2019 (COVID-19). The LabTurbo AIO 48 system is an automated platform that allows nucleic acid extraction and sample analysis on the same instrument, producing faster results without affecting their accuracy. We aimed to independently evaluate the LabTurbo AIO 48 (all-in-one system) for SARS-CoV-2 detection.Materials and methodsComparative limit of detection (LOD) was assessed on both the LabTurbo AIO 48 and current standard detection system based on real-time reverse transcriptase polymerase chain reaction (RT-PCR), using SARS-CoV-2 RNA control. Additional 125 primary clinical samples were assessed using both the protocols in parallel.ResultsThe turnaround time from sample to results for 48 samples analyzed on LabTurbo AIO 48 was approximately 2.5 h, whereas that analyzed using the in-house RT-PCR protocol was 4.8 h. LabTurbo AIO 48 also demonstrated higher sensitivity than our reference RT-PCR assay, with a LOD of 9.4 copies/reaction. The overall percentage agreement between both the methods for 125 samples was 100%.ConclusionLabTurbo AIO 48 is a robust detection option for SARS-CoV-2, allowing faster results and, consequently, aiding in better control and prevention of COVID-19.
| S-EPMC7836538 | biostudies-literature
Project description:BackgroundThe Coronavirus disease 2019 (COVID-19) pandemic continues to spread across the world. Hence, there is an urgent need for rapid, simple, and accurate tests to diagnose severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection. Performance characteristics of the rapid SARS-CoV-2 antigen detection test should be evaluated and compared with the gold standard real-time reverse transcription-polymerase chain reaction (RT-PCR) test for diagnosis of COVID-19 cases.MethodsThe rapid SARS-CoV-2 antigen detection test, Standard™ Q COVID-19 Ag kit (SD Biosensor®, Republic of Korea), was compared with the real-time RT-PCR test, Allplex™ 2019-nCoV Assay (Seegene®, Korea) for detection of SARS-CoV-2 in respiratory specimens. Four hundred fifty-four respiratory samples (mainly nasopharyngeal and throat swabs) were obtained from COVID-19 suspected cases and contact individuals, including pre-operative patients at Siriraj Hospital, Bangkok, Thailand during March-May 2020.ResultsOf 454 respiratory samples, 60 (13.2%) were positive, and 394 (86.8%) were negative for SARS-CoV-2 RNA by real-time RT-PCR assay. The duration from onset to laboratory test in COVID-19 suspected cases and contact individuals ranged from 0 to 14 days with a median of 3 days. The rapid SARS-CoV-2 antigen detection test's sensitivity and specificity were 98.33% (95% CI, 91.06-99.96%) and 98.73% (95% CI, 97.06-99.59%), respectively. One false negative test result was from a sample with a high real-time RT-PCR cycle threshold (Ct), while five false positive test results were from specimens of pre-operative patients.ConclusionsThe rapid assay for SARS-CoV-2 antigen detection showed comparable sensitivity and specificity with the real-time RT-PCR assay. Thus, there is a potential use of this rapid and simple SARS-CoV-2 antigen detection test as a screening assay.
| S-EPMC7665091 | biostudies-literature
Project description:Coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has spread worldwide. Many variants of SARS-CoV-2 have been reported, some of which have increased transmissibility and/or reduced susceptibility to vaccines. There is an urgent need for variant phenotyping for epidemiological surveillance of circulating lineages. Whole-genome sequencing is the gold standard for identifying SARS-CoV-2 variants, which constitutes a major bottleneck in developing countries. Methodological simplification could increase epidemiological surveillance feasibility and efficiency. We designed a novel multiplex real-time reverse transcriptase PCR (RT-PCR) to detect SARS-CoV-2 variants with S gene mutations. This multiplex PCR typing method was established to detect 9 mutations with specific primers and probes (ΔHV 69/70, K417T, K417N, L452R, E484K, E484Q, N501Y, P681H, and P681R) against the receptor-binding domain of the spike protein of SARS-CoV-2 variants. In silico analyses showed high specificity of the assays. Variants of concern (VOC) typing results were found to be highly specific for our intended targets, with no cross-reactivity observed with other upper respiratory viruses. The PCR-based typing methods were further validated using whole-genome sequencing and a commercial kit that was applied to clinical samples of 250 COVID-19 patients from Taiwan. The screening of these samples allowed the identification of epidemic trends by time intervals, including B.1.617.2 in the third Taiwan wave outbreak. This PCR typing strategy allowed the detection of five major variants of concern and also provided an open-source PCR assay which could rapidly be deployed in laboratories around the world to enhance surveillance for the local emergence and spread of B.1.1.7, B.1.351, P.1, and B.1.617.2 variants and of four Omicron mutations on the spike protein (ΔHV 69/70, K417N, N501Y, P681H). IMPORTANCE COVID-19 has spread globally. SARS-CoV-2 variants of concern (VOCs) are leading the next waves of the COVID-19 pandemic. Previous studies have pointed out that these VOCs may have increased infectivity, have reduced vaccine susceptibility, change treatment regimens, and increase the difficulty of epidemic prevention policy. Understanding SARS-CoV-2 variants remains an issue of concern for all local government authorities and is critical for establishing and implementing effective public health measures. A novel SARS-CoV-2 variant identification method based on a multiplex real-time RT-PCR was developed in this study. Five SARS-CoV-2 variants (Alpha, Beta, Gamma, Delta, and Omicron) were identified simultaneously using this method. PCR typing can provide rapid testing results with lower cost and higher feasibility, which is well within the capacity for any diagnostic laboratory. Characterizing these variants and their mutations is important for tracking SAR-CoV-2 evolution and is conducive to public infection control and policy formulation strategies.
| S-EPMC8865422 | biostudies-literature
Project description:The Hologic Panther Fusion® Open Access™ functionality allows implementation of laboratory-developed tests (LDTs), with fully automated sample extraction, real-time PCR, and result interpretation. We report the development and validation of a multiplex LDT for norovirus G1, norovirus G2, and rotavirus from stool samples on this system. The LDT was optimized for primer and probe sequences, salt concentration, and PCR annealing temperature. Reproducibility of the PCR and extraction process was assessed. Performance of the multiplex LDT assay was evaluated with external quality assessment (EQA) samples and compared to a commercial multiplex assay (Allplex™ GI-Virus Assay, Seegene) in clinical samples. Salt concentrations and annealing/extension temperature were optimized to 4 mM MgCl2, 70 mM KCl, 20 mM Tris, and 60 °C, respectively. The user-prepared part of the LDT PCR mix (containing salts, probes, and primers) was stable for ≥ 11 days onboard the instrument. We observed reproducible results of PCR and the extraction process. The LDT had a sensitivity comparable to or greater than the commercial Allplex™ assay and showed excellent linearity. Forty-five EQA samples yielded the expected result with the LDT. There was 100% concordance between LDT and Allplex™ results in 160 clinical samples. Results from the suspension and direct swab stool sample preparation methods were highly concordant in the LDT. We report the successful development and validation of a multiplex PCR LDT for detection of norovirus G1, norovirus G2, and rotavirus from stool samples on the Panther Fusion® system.
| S-EPMC6962121 | biostudies-literature
Project description:BACKGROUND:Influenza C virus can cause both upper and lower respiratory tract infections and has been reported to be prevalent in children. However, these infections have been under-diagnosed, and epidemiological data available are limited due to the lack of convenient detection assays. OBJECTIVE:Design and validate a real-time reverse-transcriptase PCR (rt RT-PCR) assay for the detection of influenza C. STUDY DESIGN:Respiratory samples from two primary settings, namely, children who were hospitalized or seen in the emergency department, and respiratory outbreaks for which no other viral etiology was found were used for the detection of influenza C. RESULTS AND CONCLUSIONS:The assay was sensitive and specific for the detection of influenza C. Eleven of 474 (2·32%) patients, all less than 10 years of age, were positive for influenza C. The strains clustered into two lineages, namely C/Kanagawa and C/Sao Paulo, based upon sequencing of the hemagglutinin-esterase gene. Epidemiological data showed that a higher proportion of influenza C infections occur in younger children and during the winter months. This is the first report of the detection of influenza C in Alberta, Canada, and suggests that the detection of this virus should be included in respiratory virus testing panels.
| S-EPMC4634283 | biostudies-literature
Project description:A high throughput universal influenza A and B duplex real-time RT-PCR was developed to meet effectively the heightened surveillance and diagnostic needs essential in managing influenza infections and outbreaks. Primers and probes, designed to target highly conserved regions of the matrix protein of influenza A and the nucleoprotein of influenza B, were optimized using the high-throughput LightCycler 480 II system. Analytical sensitivity and specificity were characterized using RNA transcripts diluted serially, archived non-influenza respiratory viruses, and proficiency test samples. Eighty-nine clinical samples were tested in parallel against existing influenza A and B monoplex assays. Once validated, the duplex assay was applied prospectively on 2,458 clinical specimens that were later subtyped. In April 2011, the emergence of an influenza B variant necessitated the inclusion of an additional modified probe for influenza B and revalidation of the revised protocol. The lower detection limits of the assay were 50 copies/PCR. There was no cross-reactivity against any non-influenza respiratory virus and all proficiency testing materials were identified correctly. The parallel testing revealed a 98.9% overall agreement. Routine application of the assay revealed high sensitivity and specificity for the detection of influenza A/H1N1/2009, A/H3N2 and influenza B. Assay C(q) values correlated well between the pre- and post-revision protocols for influenza A (r(2) = 0.998) and B (r(2) = 0.999). The revised protocol detected three additional novel influenza B variant cases in 200 specimens reported previously as influenza B negative. This in-house assay offers a highly sensitive and specific option for laboratories seeking to expand their influenza testing capacity.
| S-EPMC7166972 | biostudies-literature
Project description:A real-time reverse transcriptase-polymerase chain reaction (RT-PCR) for the detection of bovine coronavirus (BCoV) RNA in clinical samples is described. The assay is based on TaqMan technology, consisting of two primers and one probe labeled with the reporter dye 6-carboxyfluorescein that binds selectively to the transmembrane-protein gene of BCoV. The BCoV real-time RT-PCR assay was able to detect the tested BCoV and BCoV-like viruses (canine respiratory coronavirus and bubaline coronavirus), whereas other common viral pathogens of cattle were not recognised by the established oligonucleotide set, thus showing that the test was specific for bovine-like CoVs. The detection limit of the assay was 20 BCoV RNA copies (1-log higher with respect to traditional gel-based RT-PCR) and the reproducibility was satisfactory, thus allowing for a sensitive and accurate measurement of the viral RNA load in clinical samples. Two hundred and twenty clinical specimens (92 rectal, 82 nasal and 46 ocular swabs) were subjected to gel-based and real-time RT-PCR. By conventional amplification, 43 rectal, 54 nasal and 34 ocular samples tested positive, whereas the TaqMan assay was able to detect the BCoV nucleic acid in 49 rectal, 60 nasal and 37 ocular swabs. The rapidity and high throughput of the BCoV TaqMan assay makes this method a powerful tool for a sensitive and specific diagnosis of BCoV infection in cattle.
| S-EPMC7112840 | biostudies-literature