Dataset Information

Physical Experiment and Numerical Simulation of the Depressurization Rate for Coalbed Methane Production.

ABSTRACT: The influence of the depressurization rate on coalbed methane desorption and percolation was studied using physical experiment and numerical simulation. First, low-field nuclear magnetic resonance technology provided a new approach to conduct desorption experiments with different depressurization schemes and obtain the compressibility (C f) of coal samples. Then, the productivity calculation of different depressurization schemes was carried out via numerical simulation. The results showed that the first-slow-then-fast (FSTF) depressurization scheme had the highest desorption efficiency (94%), followed by one-stop desorption (85%), first-fast-then-slow desorption (79%), and uniform depressurization desorption (61%). T 2 cutoff values and the corresponding compressibility were obtained by the saturation-centrifugation method and spectral morphology method, and a high-precision permeability expression for dynamic evaluation of numerical simulation was established by the historical production data fitting approach. Through numerical simulation, high production efficiency can be achieved using depressurization rates of medium (15 kPa/d) and FSTF schemes (8 & 50 kPa/d), and depressurization funnel expansion in the single-phase water flow stage plays a decisive role in stable and high-yield production in the later stage. Thus, the FSTF pressure reduction strategy could be advocated to promote gas production. Slow depressurization should be applied in ineffective desorption and the slow desorption stage for saturated coal seam or single-phase flow stage for undersaturated coal seam, given the higher single-phase water permeability. During the rapid and sensitive desorption stage, rapid depressurization is recommended because of large desorption capacity and low water phase permeability. This paper provides a possibility for the optimization of coalbed methane field production management.

SUBMITTER: Quan F

PROVIDER: S-EPMC7482415 | biostudies-literature | 2020 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Physical Experiment and Numerical Simulation of the Depressurization Rate for Coalbed Methane Production.

Quan Fangkai F Wei Chongtao C Feng Shuailong S Hu Yunbing Y

ACS omega 20200824 35

The influence of the depressurization rate on coalbed methane desorption and percolation was studied using physical experiment and numerical simulation. First, low-field nuclear magnetic resonance technology provided a new approach to conduct desorption experiments with different depressurization schemes and obtain the compressibility (<i>C</i> <sub>f</sub>) of coal samples. Then, the productivity calculation of different depressurization schemes was carried out via numerical simulation. The res ...[more]

PMID: 32923826

Similar Datasets

Project description:The permeability of the coal body is the key parameter restricting the efficient extraction of coalbed methane, and scholars have analysed it from two angles of the change of stress state and porosity of the coal body. However, there is still a lack of study on the mechanism of gas migration and movement in soft coalbed methane reservoir under the coupling between the true triaxial stress field (maximum principal stress ? 1 > intermediate principal stress ? 2 > minimum principal stress ? 3) and the gas pressure field. In this paper, the coal gas adsorption and seepage experiments are conducted through the self-developed true triaxial 'gas-solid' coupled coal mass seepage system with gas as the adsorption and seepage medium and coal briquette taking the place of soft coalbed methane reservoirs. Furthermore, the coal gas adsorption deformation model and the permeability evolution model taking gas adsorption into account are developed. Through analysis of both experimental and theoretic results, the main conclusions are drawn as follows: (i) With the increase in gas pressure, the adsorption deformation variation of coal mass is divided into a slow growth zone, a stable growth zone and a rapid growth zone. (ii) The gas adsorption deformation model developed can predict the variation trend of coal mass adsorption volumetric strains for different types of soft coalbeds, and the fitting variance of experimental and theoretical volumetric strains is above 98%. (iii) With the increase in maximum principal stress difference, the coal permeability variation curve shows two obvious turning points, which can be divided into a slow reduction zone, a rapid reduction zone and a steady reduction zone. (iv) The permeability model of coal mass considering the gas adsorption effect can reflect the variation characteristics of permeability in the rapid reduction zone, and the overall fitting variance of experimental and theoretical permeabilities is above 91%. The above results could provide a reliable experimental and theoretical basis for improving coalbed methane extraction rates.

Dataset Information

Physical Experiment and Numerical Simulation of the Depressurization Rate for Coalbed Methane Production.

Publications

Physical Experiment and Numerical Simulation of the Depressurization Rate for Coalbed Methane Production.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets