Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Development of a smartphone-based real time cost-effective VOC sensor.

ABSTRACT: Air pollution by various volatile organic compounds (VOC) is a matter of concern for us. So in this regard, designing real-time VOC responsive materials is gaining attention across the scientific community. In this present work, we have developed an inexpensive VOC sensor based on a Meisenheimer complex derived from picric acid and N,N'-dicyclohexylcarbodiimide. The sensor coated TLC plate was used as a sensor of potentially harmful VOCs. The sensor coated TLC plate looks deep red colored and does not show any fluorescence emission under 366 nm UV light. But in the presence of harmful volatile organic compounds like benzene, toluene, xylene, etc the sensor coated TLC plate becomes orange colored and it also shows strong yellow emission under 366 nm UV light. This property was utilized to detect the VOCs by fluorescence spectroscopy. The detection limit for various VOCs was found to be in the range of 0.7-9 ppm. To make the sensor user friendly, we have demonstrated a method where VOCs can be detected using a smartphone in real-time and also the setup is portable.

SUBMITTER: Das T

PROVIDER: S-EPMC7566110 | biostudies-literature | 2020 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Development of a smartphone-based real time cost-effective VOC sensor.

Das Tanmay T Mohar Mrittika M

Heliyon 20201013 10

Air pollution by various volatile organic compounds (VOC) is a matter of concern for us. So in this regard, designing real-time VOC responsive materials is gaining attention across the scientific community. In this present work, we have developed an inexpensive VOC sensor based on a Meisenheimer complex derived from picric acid and N,N'-dicyclohexylcarbodiimide. The sensor coated TLC plate was used as a sensor of potentially harmful VOCs. The sensor coated TLC plate looks deep red colored and do ...[more]

PMID: 33088950

Similar Datasets

Ultrasonic atomizer based development of pH sensor for real time analysis.

Project description:Fluorescent pH biosensors have gained importance owing to their low cost utilization in real time monitoring of biological and food samples in comparison to conventional pH meters. The research reports a novel method of ultrasonic atomization for developing a fluorescent pH sensor for real-time analysis made of Fluorescein isothiocyanate (FITC)-dextran/FITC-dextran-Tris (2, 2'-bipyridyl) dichlororuthenium (II) hexahydrate as indicator and reference fluorophores, respectively. The process of ultrasonic atomization ensures formation of monodisperse dye immobilized alginate microspheres ensuring efficient pH sensing. The developed biosensor was tested on milk samples, which has a short life span and shows a significant fall in pH with time due to microbial spoilage. The proposed biosensor showed a linear range of pH 4-8 (R2 between 0.96-0.99 for different single/dual fluorophore biosensors) which suitably cover the pH of milk during the entire storage period and spoilage. The % recovery for predicted pH falls between 90-110% compared against standard pH meter, indicating a good accuracy of estimation and low turnaround time (10 min). Thus, real-time monitoring using fluorescent pH biosensor for milk samples may profoundly improve the economics of losses occurring in processing and storage with capability of in-package continuous quality assessment.

| S-EPMC7331635 | biostudies-literature

Laboratory evaluation of a low-cost, real-time, aerosol multi-sensor.

Project description:Exposure to occupational aerosols are a known hazard in many industry sectors and can be a risk factor for several respiratory diseases. In this study, a laboratory evaluation of low-cost aerosol sensors, the Dylos DC1700 and a modified Dylos known as the Utah Modified Dylos Sensor (UMDS), was performed to assess the sensors' efficiency in sampling respirable and inhalable dust at high concentrations, which are most common in occupational settings. Dust concentrations were measured in a low-speed wind tunnel with 3 UMDSs, collocated with an aerosol spectrometer (Grimm 1.109) and gravimetric respirable and inhalable samplers. A total of 10 tests consisting of 5 different concentrations and 2 test aerosols, Arizona road dust and aluminum oxide, were conducted. For the Arizona road dust, total particle count was strongly related between the spectrometer and the UMDS with a coefficient of determination (R2) between 0.86-0.92. Particle count concentrations measured with the UMDS were converted to mass and also were related with gravimetrically collected inhalable and respirable dust. The UMDS small bin (i.e., all particles) compared to the inhalable sampler yielded an R2 of 0.86-0.92, and the large bin subtracted from the small bin (i.e., only the smallest particles) compared to the respirable sampler yielded an R2 of 0.93-0.997. Tests with the aluminum oxide demonstrated a substantially lower relationship across all comparisons. Furthermore, assessment of intra-instrument variability was consistent for all instruments, but inter-instrument variability indicated that each instrument requires its own calibration equation to yield accurate exposure estimates. Overall, it appears that the UMDS can be used as a low-cost tool to estimate respirable and inhalable concentrations found in many workplaces. Future studies will focus on deployment of a UMDS network in an occupational setting.

| S-EPMC6309410 | biostudies-literature

An effective approach to improving low-cost GPS positioning accuracy in real-time navigation.

Project description:Positioning accuracy is a challenging issue for location-based applications using a low-cost global positioning system (GPS). This paper presents an effective approach to improving the positioning accuracy of a low-cost GPS receiver for real-time navigation. The proposed method precisely estimates position by combining vehicle movement direction, velocity averaging, and distance between waypoints using coordinate data (latitude, longitude, time, and velocity) of the GPS receiver. The previously estimated precious reference point, coordinate translation, and invalid data check also improve accuracy. In order to evaluate the performance of the proposed method, we conducted an experiment using a GARMIN GPS 19xHVS receiver attached to a car and used Google Maps to plot the processed data. The proposed method achieved improvement of 4-10 meters in several experiments. In addition, we compared the proposed approach with two other state-of-the-art methods: recursive averaging and ARMA interpolation. The experimental results show that the proposed approach outperforms other state-of-the-art methods in terms of positioning accuracy.

| S-EPMC4099514 | biostudies-other

Development and Evaluation of A Novel and Cost-Effective Approach for Low-Cost NO₂ Sensor Drift Correction.

Project description:Emerging low-cost gas sensor technologies have received increasing attention in recent years for air quality measurements due to their small size and convenient deployment. However, in the diverse applications these sensors face many technological challenges, including sensor drift over long-term deployment that cannot be easily addressed using mathematical correction algorithms or machine learning methods. This study aims to develop a novel approach to auto-correct the drift of commonly used electrochemical nitrogen dioxide (NO₂) sensor with comprehensive evaluation of its application. The impact of environmental factors on the NO₂ electrochemical sensor in low-ppb concentration level measurement was evaluated in laboratory and the temperature and relative humidity correction algorithm was evaluated. An automated zeroing protocol was developed and assessed using a chemical absorbent to remove NO₂ as a means to perform zero correction in varying ambient conditions. The sensor system was operated in three different environments in which data were compared to a reference NO₂ analyzer. The results showed that the zero-calibration protocol effectively corrected the observed drift of the sensor output. This technique offers the ability to enhance the performance of low-cost sensor based systems and these findings suggest extension of the approach to improve data quality from sensors measuring other gaseous pollutants in urban air.

| S-EPMC5580082 | biostudies-literature

Development of a Colorimetric Sensor for Autonomous, Networked, Real-Time Application.

Project description:This review describes an ongoing effort intended to develop wireless sensor networks for real-time monitoring of airborne targets across a broad area. The goal is to apply the spectrophotometric characteristics of porphyrins and metalloporphyrins in a colorimetric array for detection and discrimination of changes in the chemical composition of environmental air samples. The work includes hardware, software, and firmware design as well as development of algorithms for identification of event occurrence and discrimination of targets. Here, we describe the prototype devices and algorithms related to this effort as well as work directed at selection of indicator arrays for use with the system. Finally, we review the field trials completed with the prototype devices and discuss the outlook for further development.

| S-EPMC7589661 | biostudies-literature

Electrochemical Aptamer-Based Sensor for Real-Time Monitoring of Insulin.

Project description:In this paper, we developed an electrochemical, aptamer-based (E-AB) for the real-time monitoring of insulin. The sensor utilizes a redox label-modified guanine-rich aptamer which folds into a G-quadruplex for specific recognition of insulin. To develop a reproducible E-AB sensor employing insulin aptamer probes for the detection of insulin, 10% sodium dodecyl sulfate (SDS) pretreatment is crucial as it disrupts interstrand G-quartets. After sensor pretreatment with 10% SDS, a more uniform sensor response is obtained. Upon introduction of the insulin target, binding-induced steric hindrance quantitatively reduces the efficiency of electron transfer of a distal-end redox label leading to the rapid signal change within ?60 s. Testing demonstrates that the E-AB insulin exhibits a limit of detection of 20 nM and can be used to discriminate against both glucagon and somatostatin in Krebs-Ringer bicarbonate buffer, typically used in perfusion experiments. These results demonstrate that this assay has potential for rapid, specific, and quantitative analysis of insulin.

| S-EPMC6404975 | biostudies-literature

Wearable Sensor-Based Real-Time Gait Detection: A Systematic Review.

Project description:Gait analysis has traditionally been carried out in a laboratory environment using expensive equipment, but, recently, reliable, affordable, and wearable sensors have enabled integration into clinical applications as well as use during activities of daily living. Real-time gait analysis is key to the development of gait rehabilitation techniques and assistive devices such as neuroprostheses. This article presents a systematic review of wearable sensors and techniques used in real-time gait analysis, and their application to pathological gait. From four major scientific databases, we identified 1262 articles of which 113 were analyzed in full-text. We found that heel strike and toe off are the most sought-after gait events. Inertial measurement units (IMU) are the most widely used wearable sensors and the shank and foot are the preferred placements. Insole pressure sensors are the most common sensors for ground-truth validation for IMU-based gait detection. Rule-based techniques relying on threshold or peak detection are the most widely used gait detection method. The heterogeneity of evaluation criteria prevented quantitative performance comparison of all methods. Although most studies predicted that the proposed methods would work on pathological gait, less than one third were validated on such data. Clinical applications of gait detection algorithms were considered, and we recommend a combination of IMU and rule-based methods as an optimal solution.

| S-EPMC8069962 | biostudies-literature

A cost effective real-time PCR for the detection of adenovirus from viral swabs.

Project description:Compared to traditional testing strategies, nucleic acid amplification tests such as real-time PCR offer many advantages for the detection of human adenoviruses. However, commercial assays are expensive and cost prohibitive for many clinical laboratories. To overcome fiscal challenges, a cost effective strategy was developed using a combination of homogenization and heat treatment with an "in-house" real-time PCR. In 196 swabs submitted for adenovirus detection, this crude extraction method showed performance characteristics equivalent to viral DNA obtained from a commercial nucleic acid extraction. In addition, the in-house real-time PCR outperformed traditional testing strategies using virus culture, with sensitivities of 100% and 69.2%, respectively. Overall, the combination of homogenization and heat treatment with a sensitive in-house real-time PCR provides accurate results at a cost comparable to viral culture.

| S-EPMC3679997 | biostudies-literature

Humidity sensor based on Gallium Nitride for real time monitoring applications.

Project description:Gallium Nitride (GaN) remarkably shows high electron mobility, wide energy band gap, biocompatibility, and chemical stability. Wurtzite structure makes topmost Gallium atoms electropositive, hence high ligand binding ability especially to anions, making it usable as humidity sensor due to water self-ionization phenomenon. In this work, thin-film GaN based humidity sensor is fabricated through pulse modulated DC magnetron sputtering. Interdigitated electrodes (IDEs) with 100 μm width and spacing were inkjet printed on top of GaN sensing layer to further enhance sensor sensitivity. Impedance, capacitance, and current response were recorded for humidity and bio-sensing applications. The sensor shows approximate linear impedance response between 0 and 100% humidity range, the sensitivity of 8.53 nF/RH% and 79 kΩ/RH% for capacitance and impedance, and fast response (Tres) and recovery (Trec) time of 3.5 s and 9 s, respectively. The sensor shows little hysteresis of < 3.53% with stable and wide variations for accurate measurements. Especially, it demonstrates temperature invariance for thermal stability. Experimental results demonstrate fabricated sensor effectively evaluates plant transpiration cycle through water level monitoring by direct attachment onto leaves without causing any damage as well as freshness level of meat loaf. These properties of the proposed sensor make it a suitable candidate for future electronics providing a low-cost platform for real time monitoring applications.

| S-EPMC8159938 | biostudies-literature

Orientation-based FRET sensor for real-time imaging of cellular forces.

Project description:Mechanical stress is an unmapped source of free energy in cells. Mapping the stress fields in a heterogeneous time-dependent environment like that found in cells requires probes that are specific for different proteins and respond to biologically relevant forces with minimal disturbance to the host system. To meet these goals, we have designed a genetically encoded stress sensor with minimal volume and high sensitivity and dynamic range. The new FRET-based sensor, called cpstFRET, is designed to be modulated by the angles between the donor and acceptor rather than the distance between them. Relative to other probes, it is physically smaller and exhibits a greater dynamic range and sensitivity and expresses well. For in vivo testing, we measured stress gradients in time and space in non-erythroid spectrin in several different cell types and found that spectrin is under constitutive stress in some cells but not in others. Stresses appear to be generated by both F-actin and tubulin. The probe revealed, for the first time, that spectrin undergoes time-dependent force modulation during cell migration. cpstFRET can be employed in vitro, in vivo and in situ, and when incorporated into biologically expressed extracellular polymers such as collagen, it can report multidimensional stress fields.

| S-EPMC3367834 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data