Dataset Information

Factors associated with maintaining reduction following locking plate fixation of proximal humerus fractures: a population-based retrospective cohort study.

ABSTRACT:

Background

Loss of reduction (LoR) can occur after locking plate fixation of proximal humerus fractures (PHFs). This study determined biomechanical features of fracture fixation associated with preventing LoR postoperatively. One-year reoperation rates were also compared between those with/without LoR.

Methods

Population-based administrative data for 359 adults treated using a locking plate for PHF between 2010 and 2016 were examined. Two trained assessors reviewed standardized shoulder radiographs. LoR (Yes/No) was defined as any fracture displacement >0.5 cm, and/or >10° change in neck-shaft angle (NSA) alignment relative to intraoperative imaging. Multiple logistic regression assessed how the following affected maintaining reduction: (1) sex, (2) age, (3) Neer classification, (4) shaft impaction (SI), (5) shaft medialization (SM), (6) calcar reduction (CR), (7) NSA alignment, and (8) screw use.

Results

LoR was seen in 79 (22%) patients. LoR was significantly associated with increasing age (odds ratio [OR] = 1.06/yr, P < .001), fracture severity (4-part vs. 2-part fracture; OR = 4.63, P = .001), and varus NSA alignment (<125° vs. ?145°: OR = 5.6, P = .02; <125° vs. 125-145°, OR = 2.2, P = .02]). Patients achieving simultaneous SI, SM, and CR were significantly less likely (OR = 0.009, P < .001) to lose reduction, after controlling for age, fracture severity, and NSA alignment. If only SI was achieved, patients were still significantly less likely to lose reduction relative to achieving none of these mechanical features (OR = 0.17, P = .006). Reoperations were higher when LoR occurred (n = 26/77 [33.4%]) compared with no LoR (n = 20/276 [7.2%]) (P < .001).

Conclusions

SI was strongly associated with preventing LoR in patients treated using a locking plate for PHF. SI with concurrent SM, CR, and a neutral or valgus NSA had the lowest rates of LoR. LoR was associated with higher rates of reoperation.

SUBMITTER: Bouliane M

PROVIDER: S-EPMC7738575 | biostudies-literature | 2020 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Factors associated with maintaining reduction following locking plate fixation of proximal humerus fractures: a population-based retrospective cohort study.

Bouliane Martin M Silveira Anelise A AlEidan AlJarrah A Heinrichs Luke L Kang Sung Hyun SH Sheps David M DM Beaupre Lauren L

JSES international 20200909 4

<h4>Background</h4>Loss of reduction (LoR) can occur after locking plate fixation of proximal humerus fractures (PHFs). This study determined biomechanical features of fracture fixation associated with preventing LoR postoperatively. One-year reoperation rates were also compared between those with/without LoR.<h4>Methods</h4>Population-based administrative data for 359 adults treated using a locking plate for PHF between 2010 and 2016 were examined. Two trained assessors reviewed standardized sh ...[more]

PMID: 33345206

Similar Datasets

Project description:Joint-preserving surgical treatment of complex unstable proximal humerus fractures remains challenging, with high failure rates even following state-of-the-art locked plating. Enhancement of implants could help improve outcomes. By overcoming limitations of conventional biomechanical testing, finite element (FE) analysis enables design optimization but requires stringent validation. This study aimed to computationally enhance the design of an existing locking plate to provide superior fixation stability and evaluate the benefit experimentally in a matched-pair fashion. Further aims were the evaluation of instrumentation accuracy and its potential influence on the specimen-specific predictive ability of FE. Screw trajectories of an existing commercial plate were adjusted to reduce the predicted cyclic cut-out failure risk and define the enhanced (EH) implant design based on results of a previous parametric FE study using 19 left proximal humerus models (Set A). Superiority of EH versus the original (OG) design was tested using nine pairs of human proximal humeri (N = 18, Set B). Specimen-specific CT-based virtual preoperative planning defined osteotomies replicating a complex 3-part fracture and fixation with a locking plate using six screws. Bone specimens were prepared, osteotomized and instrumented according to the preoperative plan via a standardized procedure utilizing 3D-printed guides. Cut-out failure of OG and EH implant designs was compared in paired groups with both FE analysis and cyclic biomechanical testing. The computationally enhanced implant configuration achieved significantly more cycles to cut-out failure compared to the standard OG design (p < 0.01), confirming the significantly lower peri-implant bone strain predicted by FE for the EH versus OG groups (p < 0.001). The magnitude of instrumentation inaccuracies was small but had a significant effect on the predicted failure risk (p < 0.01). The sample-specific FE predictions strongly correlated with the experimental results (R2 = 0.70) when incorporating instrumentation inaccuracies. These findings demonstrate the power and validity of FE simulations in improving implant designs towards superior fixation stability of proximal humerus fractures. Computational optimization could be performed involving further implant features and help decrease failure rates. The results underline the importance of accurate surgical execution of implant fixations and the need for high consistency in validation studies.

Project description:BACKGROUND:Proximal humerus fractures are the third most common fracture in the elderly population and are expected to increase due to the aging population. Surgical fixation with locking plate technology has increased over the last decade despite a lack of proven superiority in the literature. Three previous randomized controlled trials have not shown a difference in patient-centered outcomes when comparing non-operative treatment with open reduction and internal fixation. Low patient enrollment and other methodological concerns however limit the generalizability of these conclusions and as a result, management of these fractures remains a controversy. By comparing the functional outcomes of locked plate surgical fixation versus non-operative treatment of displaced three and four-part proximal humerus fractures in the elderly population with a large scale, prospective, multi-centered randomized controlled trial, the optimal management strategy for this common injury may be determined. METHODS:We will conduct a prospective, single blind randomized controlled parallel arm trial to compare non-operative management of proximal humerus fractures with open reduction and internal fixation using locked plating technology. One-hundred and sixty patients > age 60 with acute 3- or 4- part proximal humerus fractures will be randomized to either open reduction and internal fixation with locked plating technology or non-operative management treatment arms. The primary outcome measure is the Constant Score at 24 months post-operative. Secondary outcome measures include the American Shoulder and Elbow Surgeon's Score (ASES), EuroQol EQ-5D-5 L Health Questionnaire Score, short form PROMIS upper extremity score and IPAQ for the elderly score. Further outcome measures include assessment of the initial classification, displacement and angulation and the quality of surgical reduction via a standard computed tomography (CT) scan; rates of non-union, malunion, arthrosis, osteopenia or other complications including infection, nerve injury, intra-articular screw penetration, reoperation rates and hospital re-admission rates. DISCUSSION:The results of this trial will provide Level 1 evidence to guide decision-making in the treatment of proximal humerus fractures in the elderly population. TRIAL REGISTRATION:ClinicalTrials.gov NCT02362100 . Registered 5 Feb 2015.

Project description:BackgroundProximal humerus fractures are the third most common in the human body but their management remains controversial. Open reduction and internal fixation with plates is one of the leading modes of operative treatment for these fractures. The development of technologies and techniques for these plates, during the recent decades, promise a bright future for their clinical use. A comprehensive review of in vitro biomechanical studies is needed for the comparison of plates' mechanical performance and the testing methodologies. This will not only guide clinicians with plate selection but also with the design of future in vitro biomechanical studies. This review was aimed to systematically categorise and review the in vitro biomechanical studies of these plates based on their protocols and discuss their results. The technologies and techniques investigated in these studies were categorised and compared to reach a census where possible.Methods and resultsWeb of Science and Scopus database search yielded 62 studies. Out of these, 51 performed axial loading, torsion, bending and/or combined bending and axial loading while 11 simulated complex glenohumeral movements by using tendons. Loading conditions and set-up, failure criteria and performance parameters, as well as results for each study, were reviewed. Only two studies tested four-part fracture model while the rest investigated two- and three-part fractures. In ten studies, synthetic humeri were tested instead of cadaveric ones. In addition to load-displacement data, three-dimensional motion analysis systems, digital image correlation and acoustic emission testing have been used for measurement.ConclusionsOverall, PHILOS was the most tested plate and locking plates demonstrated better mechanical performance than non-locking ones. Conflicting results have been published for their comparison with non-locking blade plates and polyaxial locking screws. Augmentation with cement [calcium phosphate or poly(methyl methacrylate)] or allografts (fibular and femoral head) was found to improve bone-plate constructs' mechanical performance. Controversy still lies over the use of rigid and semi-rigid implants and the insertion of inferomedial screws for calcar region support. This review will guide the design of in vitro and in silico biomechanical tests and also supplement the study of clinical literature.

Dataset Information

Factors associated with maintaining reduction following locking plate fixation of proximal humerus fractures: a population-based retrospective cohort study.

Background

Methods

Results

Conclusions

Publications

Factors associated with maintaining reduction following locking plate fixation of proximal humerus fractures: a population-based retrospective cohort study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets