Author Correction: Charge-generating mid-gap trap states define the thermodynamic limit of organic photovoltaic devices.
Ontology highlight
ABSTRACT:
SUBMITTER: Zarrabi N
PROVIDER: S-EPMC7782746 | biostudies-literature | 2021 Jan
REPOSITORIES: biostudies-literature
Publications
Author Correction: Charge-generating mid-gap trap states define the thermodynamic limit of organic photovoltaic devices.
Zarrabi Nasim N Sandberg Oskar J OJ Zeiske Stefan S Li Wei W Riley Drew B DB Meredith Paul P Armin Ardalan A
Nature communications 20210104 1
Similar Datasets
Project description:Detailed balance is a cornerstone of our understanding of artificial light-harvesting systems. For next generation organic solar cells, this involves intermolecular charge-transfer (CT) states whose energies set the maximum open circuit voltage VOC. We have directly observed sub-gap states significantly lower in energy than the CT states in the external quantum efficiency spectra of a significant number of organic semiconductor blends. Taking these states into account and using the principle of reciprocity between emission and absorption results in non-physical radiative limits for the VOC. We propose and provide compelling evidence for these states being non-equilibrium mid-gap traps which contribute to photocurrent by a non-linear process of optical release, upconverting them to the CT state. This motivates the implementation of a two-diode model which is often used in emissive inorganic semiconductors. The model accurately describes the dark current, VOC and the long-debated ideality factor in organic solar cells. Additionally, the charge-generating mid-gap traps have important consequences for our current understanding of both solar cells and photodiodes - in the latter case defining a detectivity limit several orders of magnitude lower than previously thought.
| S-EPMC7642445 | biostudies-literature
Project description:Trap-assisted recombination caused by localised sub-gap states is one of the most important first-order loss mechanism limiting the power-conversion efficiency of all solar cells. The presence and relevance of trap-assisted recombination in organic photovoltaic devices is still a matter of some considerable ambiguity and debate, hindering the field as it seeks to deliver ever higher efficiencies and ultimately a viable new solar photovoltaic technology. In this work, we show that trap-assisted recombination loss of photocurrent is universally present under operational conditions in a wide variety of organic solar cell materials including the new non-fullerene electron acceptor systems currently breaking all efficiency records. The trap-assisted recombination is found to be induced by states lying 0.35-0.6 eV below the transport edge, acting as deep trap states at light intensities equivalent to 1 sun. Apart from limiting the photocurrent, we show that the associated trap-assisted recombination via these comparatively deep traps is also responsible for ideality factors between 1 and 2, shedding further light on another open and important question as to the fundamental working principles of organic solar cells. Our results also provide insights for avoiding trap-induced losses in related indoor photovoltaic and photodetector applications.
| S-EPMC8203604 | biostudies-literature
Project description:In this study, we fabricated organic photovoltaics (OPVs) by introducing the polymer additive HTh6BT into the photoactive layer of a poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester (P3HT:PCBM) system. The HTh6BT had a relatively low band gap energy of 1.65 eV and a molecular and crystalline structure similar to that of P3HT. In the photoactive layer, the HTh6BT and P3HT can both act as donors. In such parallel-type bulk heterojunctions, each donor can form excitons and generate charges while being separated from the donor/acceptor interface. Changes in the photovoltaic property of the OPV device by the addition of HTh6BT were evaluated, and the optical characteristics of the photoactive layer, as well as the surface morphology, polymer ordering, and crystallinity of the P3HT:PCBM film were analyzed. Compared to a device without HTh6BT, all short-circuit current densities, open-circuit voltages, and fill factors were enhanced, leading to the enhancement of the power conversion efficiency by 36%.
| S-EPMC5456957 | biostudies-literature
Project description:Antimony trisulfide (Sb2S3) is considered to be a promising photovoltaic material; however, the performance is yet to be satisfactory. Poor power conversion efficiency and large open circuit voltage loss have been usually ascribed to interface and bulk extrinsic defects By performing a spectroscopy study on Sb2S3 polycrystalline films and single crystal, we show commonly existed characteristics including redshifted photoluminescence with 0.6 eV Stokes shift, and a few picosecond carrier trapping without saturation at carrier density as high as approximately 1020 cm-3. These features, together with polarized trap emission from Sb2S3 single crystal, strongly suggest that photoexcited carriers in Sb2S3 are intrinsically self-trapped by lattice deformation, instead of by extrinsic defects. The proposed self-trapping explains spectroscopic results and rationalizes the large open circuit voltage loss and near-unity carrier collection efficiency in Sb2S3 thin film solar cells. Self-trapping sets the upper limit on maximum open circuit voltage (approximately 0.8 V) and thus power conversion efficiency (approximately 16 %) for Sb2S3 solar cells.
| S-EPMC6778121 | biostudies-literature
Project description:Realizing the growing number of possible or hypothesized metastable crystalline materials is extremely challenging. There is no rigorous metric to identify which compounds can or cannot be synthesized. We present a thermodynamic upper limit on the energy scale, above which the laboratory synthesis of a polymorph is highly unlikely. The limit is defined on the basis of the amorphous state, and we validate its utility by effectively classifying more than 700 polymorphs in 41 common inorganic material systems in the Materials Project for synthesizability. The amorphous limit is highly chemistry-dependent and is found to be in complete agreement with our knowledge of existing polymorphs in these 41 systems, whether made by the nature or in a laboratory. Quantifying the limits of metastability for realizable compounds, the approach is expected to find major applications in materials discovery.
| S-EPMC5930398 | biostudies-literature
Project description:The optimal hybridization of photovoltaic (PV) and thermoelectric (TE) devices has long been considered ideal for the efficient harnessing solar energy. Our hybrid approach uses full spectrum solar energy via lossless coupling between PV and TE devices while collecting waste energy from thermalization and transmission losses from PV devices. Achieving lossless coupling makes the power output from the hybrid device equal to the sum of the maximum power outputs produced separately from individual PV and TE devices. TE devices need to have low internal resistances enough to convey photo-generated currents without sacrificing the PV fill factor. Concomitantly, a large number of p-n legs are preferred to drive a high Seebeck voltage in TE. Our simple method of attaching a TE device to a PV device has greatly improved the conversion efficiency and power output of the PV device (~30% at a 15°C temperature gradient across a TE device).
| S-EPMC3699810 | biostudies-other
Project description:Light-driven degradation of photoactive molecules could be one of the major obstacles to stable long term operation of organic dye-based solar light harvesting devices. One solution to this problem may be mimicking the regeneration functionality of a plant leaf. We report an organic dye photovoltaic system that has been endowed with such microfluidic regeneration functionality. A hydrogel medium with embedded channels allows rapid and uniform supply of photoactive reagents by a convection-diffusion mechanism. A washing-activation cycle enables reliable replacement of the organic component in a dye-sensitized photovoltaic system. Repetitive restoration of photovoltaic performance after intensive device degradation is demonstrated.
| S-EPMC3733051 | biostudies-literature
Project description:Multiferroics are being studied increasingly in applications of photovoltaic devices for the carrier separation driven by polarization and magnetization. In this work, textured black silicon photovoltaic devices are fabricated with Bi6Fe1.6Co0.2Ni0.2Ti3O18/Bi2FeCrO6 (BFCNT/BFCO) multiferroic heterojunction as an absorber and graphene as an anode. The structural and optical analyses showed that the bandgap of Aurivillius-typed BFCNT and double perovskite BFCO are 1.62 ± 0.04 eV and 1.74 ± 0.04 eV respectively, meeting the requirements for the active layer in solar cells. Under the simulated AM 1.5 G illumination, the black silicon photovoltaic devices delivered a photoconversion efficiency (η) of 3.9% with open-circuit voltage (Voc), short-circuit current density (Jsc), and fill factor (FF) of 0.75 V, 10.8 mA cm-2, and 48.3%, respectively. Analyses of modulation of an applied electric and magnetic field on the photovoltaic properties revealed that both polarization and magnetization of multiferroics play an important role in tuning the built-in electric field and the transport mechanisms of charge carriers, thus providing a new idea for the design of future high-performance multiferroic oxide photovoltaic devices.
| S-EPMC8473570 | biostudies-literature
Project description:Phthalocyanines and their main group and metal complexes are important classes of organic semiconductor materials but are usually highly insoluble and so frequently need to be processed by vacuum deposition in devices. We report two highly soluble silicon phthalocyanine (SiPc) diester compounds and demonstrate their potential as organic semiconductor materials. Near-infrared (λ(EL) = 698-709 nm) solution-processed organic light-emitting diodes (OLEDs) were fabricated and exhibited external quantum efficiencies (EQEs) of up to 1.4%. Binary bulk heterojunction solar cells employing P3HT or PTB7 as the donor and the SiPc as the acceptor provided power conversion efficiencies (PCE) of up to 2.7% under simulated solar illumination. Our results show that soluble SiPcs are promising materials for organic electronics.
| S-EPMC4832396 | biostudies-literature
Project description:Pseudotriloop (PTL) structures in RNAs have been recognized as essential elements in RNA folding and recognition of proteins. PTL structures are derived from hexaloops by formation of a cross-loop base pair leaving a triloop and 3' bulged out residue. Despite their common presence and functional importance, insufficient structural and thermodynamic data are available that can be used to predict formation of PTLs from sequence alone. Using NMR spectroscopy and UV-melting data we established factors that contribute to the formation and stability of PTL structures derived from hepatitis B virus and human foamy virus. The NMR data show that, besides the cross-loop base pair, also a 3' pyrimidine bulge and a G-C loop-closing base pair are primary determinants of PTL formation. By changing the G-C closing base pair into C-G, the PTL switches into a hexaloop. Comparison of these rules with regular triloop hairpins and PTLs from other sources is discussed as well as the conservation of a PTL in human foamy virus and other spumaretroviruses.
| S-EPMC3884659 | biostudies-literature