Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Creating self-assembled arrays of mono-oxo (MoO₃)₁ species on TiO₂(101) via deposition and decomposition of (MoO₃)_n oligomers.

ABSTRACT: Hierarchically ordered oxides are of critical importance in material science and catalysis. Unfortunately, the design and synthesis of such systems remains a key challenge to realizing their potential. In this study, we demonstrate how the deposition of small oligomeric (MoO₃)_1-6 clusters-formed by the facile sublimation of MoO₃ powders-leads to the self-assembly of locally ordered arrays of immobilized mono-oxo (MoO₃)₁ species on anatase TiO₂(101). Using both high-resolution imaging and theoretical calculations, we reveal the dynamic behavior of the oligomers as they spontaneously decompose at room temperature, with the TiO₂ surface acting as a template for the growth of this hierarchically structured oxide. Transient mobility of the oligomers on both bare and (MoO₃)₁-covered TiO₂(101) areas is identified as key to the formation of a complete (MoO₃)₁ overlayer with a saturation coverage of one (MoO₃)₁ per two undercoordinated surface Ti sites. Simulations reveal a dynamic coupling of the reaction steps to the TiO₂ lattice fluctuations, the absence of which kinetically prevents decomposition. Further experimental and theoretical characterizations demonstrate that (MoO₃)₁ within this material are thermally stable up to 500 K and remain chemically identical with a single empty gap state produced within the TiO₂ band structure. Finally, we see that the constituent (MoO₃)₁ of this material show no proclivity for step and defect sites, suggesting they can reliably be grown on the (101) facet of TiO₂ nanoparticles without compromising their chemistry.

SUBMITTER: Doudin N

PROVIDER: S-EPMC7848584 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Water Multilayers on TiO2 (101) Anatase Surface: Assessment of a DFTB-Based Method.

Project description:A water/(101) anatase TiO2 interface has been investigated with the DFT-based self-consistent-charge density functional tight-binding theory (SCC-DFTB). By comparison of the computed structural, energetic, and dynamical properties with standard DFT-GGA and experimental data, we assess the accuracy of SCC-DFTB for this prototypical solid-liquid interface. We tested different available SCC-DFTB parameters for Ti-containing compounds and, accordingly, combined them to improve the reliability of the method. To better describe water energetics, we have also introduced a modified hydrogen-bond-damping function (HBD). With this correction, equilibrium structures and adsorption energies of water on (101) anatase both for low (0.25 ML) and full (1 ML) coverages are in excellent agreement with those obtained with a higher level of theory (DFT-GGA). Furthermore, Born-Oppenheimer molecular dynamics (MD) simulations for mono-, bi-, and trilayers of water on the surface, as computed with SCC-DFTB, evidence similar ordering and energetics as DFT-GGA Car-Parrinello MD results. Finally, we have evaluated the energy barrier for the dissociation of a water molecule on the anatase (101) surface. Overall, the combined set of parameters with the HBD correction (SCC-DFTB+HBD) is shown to provide a description of the water/water/titania interface, which is very close to that obtained by standard DFT-GGA, with a remarkably reduced computational cost. Hence, this study opens the way to the future investigations on much more extended and realistic TiO2/liquid water systems, which are extremely relevant for many modern technological applications.

| S-EPMC5562391 | biostudies-literature

Resistive Switching of Sub-10 nm TiO? Nanoparticle Self-Assembled Monolayers.

Project description:Resistively switching devices are promising candidates for the next generation of non-volatile data memories. Such devices are up to now fabricated mainly by means of top-down approaches that apply thin films sandwiched between electrodes. Recent works have demonstrated that resistive switching (RS) is also feasible on chemically synthesized nanoparticles (NPs) in the 50 nm range. Following this concept, we developed this approach further to the sub-10 nm range. In this work, we report RS of sub-10 nm TiO? NPs that were self-assembled into monolayers and transferred onto metallic substrates. We electrically characterized these monolayers in regard to their RS properties by means of a nanorobotics system in a scanning electron microscope, and found features typical of bipolar resistive switching.

| S-EPMC5707587 | biostudies-literature

Enhanced Photocatalysis from Truncated Octahedral Bipyramids of Anatase TiO2 with Exposed {001}/{101} Facets.

Project description:In this study, we develop a new synthetic method to grow anatase TiO2 crystals composed of truncated octahedral bipyramids (TOBs) with exposed {001} and {101} facets by a vapor-solid reaction growth (VSRG) method. The VSRG method employs TiCl4(g) to react with CaO(s)/Ca(OH)2(s) at 823-1043 K under atmospheric pressure. The O-deficient pale-blue TOB TiO2 crystals display high amount of both {001} and {101} facets. Together, they decompose methylene blue photocatalytically under UV-visible (UV-vis) light irradiation. The most-efficient TOB catalyst VT923 (grown at 923 K, average edge length 400 nm, average thickness 200 nm, and surface area 4.20 m2/g) shows a degradation rate constant k, 0.0527 min-1. This is close to that of the P25 standard 0.0577 min-1. However, the surface area of P25 (46.8 m2/g) is about 12 times that of VT923. The extraordinary performance of VT923 is attributed to the presence of high amount of coexisting {001} and {101} facets to form effective surface heterojunctions. They would separate photogenerated electrons and holes effectively on {101} and {001} surfaces, respectively. For VT923, the {001}/{101} ratio is 0.764, which is close to 1, the highest value observed for all TOB samples grown in this study. The surface heterojunctions prolong the electron-hole separation so that VT923 demonstrates the excellent photocatalytic capability. In addition, residual Cl atoms on the exposed faces are easily removed to show clean TiO surface layers with sufficient amount of O-deficient sites in the current samples.

| S-EPMC6644679 | biostudies-literature

Facet controlled growth mechanism of SnO2 (101) nanosheet assembled film via cold crystallization.

Project description:Cold crystallization of SnO2 was realized in aqueous solutions, where crystal growth was controlled to form SnO2 (101) nanosheet assembled films for devices such as chemical sensors. The nanosheets grew directly on a fluorine-doped tin oxide substrate without a seed layer or a buffer layer. The nanosheets had a thickness of 5-10 nm and an in-plane size of 100-1600 nm. Moreover, the large flat surface of the (101) facet was metastable. The thickness of the SnO2 (101) nanosheet assembled film was approximately 800 nm, and the film had a gradient structure that contained many connected nanosheets. TEM results revealed that the predominate branch angles between any two connected nanosheets were 90° and 46.48°, corresponding to type I and type II connections, respectively. These connections were consistent with the calculations based on crystallography. Crystallographic analysis clarified the characteristic crystal growth of the SnO2 (101) nanosheet assembled film in the aqueous solution. Furthermore, we demonstrate that the metastable (101) facet can be exploited to control the rate of crystal growth by adjusting the etching condition.

| S-EPMC8163760 | biostudies-literature

Surface Modification of Perfect and Hydroxylated TiO2 Rutile (110) and Anatase (101) with Chromium Oxide Nanoclusters.

Project description:We use first-principles density functional theory calculations to analyze the effect of chromia nanocluster modification on TiO2 rutile (110) and anatase (101) surfaces, in which both dry/perfect and wet/hydroxylated TiO2 surfaces are considered. We show that the adsorption of chromia nanoclusters on both surfaces is favorable and results in a reduction of the energy gap due to a valence band upshift. A simple model of the photoexcited state confirms this red shift and shows that photoexcited electrons and holes will localize on the chromia nanocluster. The oxidation states of the cations show that Ti3+, Cr4+, and Cr2+ (with no Cr6+) can be present. To probe potential reactivity, the energy of oxygen vacancy formation is shown to be significantly reduced compared to that of pure TiO2 and chromia. Finally, we show that inclusion of water on the TiO2 surface, to begin inclusion of environment effects, has no notable effect on the energy gap or oxygen vacancy formation. These results help us to understand earlier experimental work on chromia-modified anatase TiO2 and demonstrate that chromia-modified TiO2 presents an interesting composite system for photocatalysis.

| S-EPMC6645235 | biostudies-literature

Unique S-scheme heterojunctions in self-assembled TiO2/CsPbBr3 hybrids for CO2 photoreduction.

Project description:Exploring photocatalysts to promote CO2 photoreduction into solar fuels is of great significance. We develop TiO2/perovskite (CsPbBr3) S-scheme heterojunctions synthesized by a facile electrostatic-driven self-assembling approach. Density functional theory calculation combined with experimental studies proves the electron transfer from CsPbBr3 quantum dots (QDs) to TiO2, resulting in the construction of internal electric field (IEF) directing from CsPbBr3 to TiO2 upon hybridization. The IEF drives the photoexcited electrons in TiO2 to CsPbBr3 upon light irradiation as revealed by in-situ X-ray photoelectron spectroscopy analysis, suggesting the formation of an S-scheme heterojunction in the TiO2/CsPbBr3 nanohybrids which greatly promotes the separation of electron-hole pairs to foster efficient CO2 photoreduction. The hybrid nanofibers unveil a higher CO2-reduction rate (9.02 μmol g-1 h-1) comparing with pristine TiO2 nanofibers (4.68 μmol g-1 h-1). Isotope (13CO2) tracer results confirm that the reduction products originate from CO2 source.

| S-EPMC7490390 | biostudies-literature

Flexible and high-performance electrochromic devices enabled by self-assembled 2D TiO2/MXene heterostructures.

Project description:Transition metal oxides (TMOs) are promising electrochromic (EC) materials for applications such as smart windows and displays, yet the challenge still exists to achieve good flexibility, high coloration efficiency and fast response simultaneously. MXenes (e.g. Ti3C2Tx) and their derived TMOs (e.g. 2D TiO2) are good candidates for high-performance and flexible EC devices because of their 2D nature and the possibility of assembling them into loosely networked structures. Here we demonstrate flexible, fast, and high-coloration-efficiency EC devices based on self-assembled 2D TiO2/Ti3C2Tx heterostructures, with the Ti3C2Tx layer as the transparent electrode, and the 2D TiO2 layer as the EC layer. Benefiting from the well-balanced porosity and connectivity of these assembled nanometer-thick heterostructures, they present fast and efficient ion and electron transport, as well as superior mechanical and electrochemical stability. We further demonstrate large-area flexible devices which could potentially be integrated onto curved and flexible surfaces for future ubiquitous electronics.

| S-EPMC7952574 | biostudies-literature

Activation of Water on MnOx-Nanocluster-Modified Rutile (110) and Anatase (101) TiO2 and the Role of Cation Reduction.

Project description:Surface modification of titania surfaces with dispersed metal oxide nanoclusters has the potential to enhance photocatalytic activity. These modifications can induce visible light absorption and suppress charge carrier recombination which are vital in improving the efficiency. We have studied heterostructures of Mn4O6 nanoclusters modifying the TiO2 rutile (110) and anatase (101) surfaces using density functional theory (DFT) corrected for on-site Coulomb interactions (DFT + U). Such studies typically focus on the pristine surface, free of the point defects and surface hydroxyls present in real surfaces. In our study we have considered partial hydroxylation of the rutile and anatase surfaces and the role of cation reduction, via oxygen vacancy formation, and how this impacts on a variety of properties governing the photocatalytic performance such as nanocluster adsorption, light absorption, charge separation, and reducibility. Our results indicate that the modifiers adsorb strongly at the surface and that modification extends light absorption into the visible range. MnOx-modified titania can show an off-stoichiometric ground state, through oxygen vacancy formation and cation reduction spontaneously, and both modified rutile and anatase are highly reducible with moderate energy costs. Manganese ions are therefore present in a mixture of oxidation states. Photoexcited electrons and holes localize at cluster metal and oxygen sites, respectively. The interaction of water at the modified surfaces depends on the stoichiometry and spontaneous dissociation to surface bound hydroxyls is favored in the presence of oxygen vacancies and reduced metal cations. Comparisons with bare TiO2 and other TiO2-based photocatalyst materials are presented throughout.

| S-EPMC6379279 | biostudies-literature

Water (Non-)Interaction with MoO3.

Project description:Molybdenum(VI) oxide (MoO3) is used in a number of technical processes such as gas filtration and heterogeneous catalysis. In these applications, the adsorption and dissociation of water on the surface can influence the chemistry of MoO3 and thus the course of heterogeneous reactions. We use ambient pressure X-ray photoelectron spectroscopy to study the interaction of water with a stoichiometric MoO3 surface and a MoO3 surface that features oxygen defects and hydroxyl groups. The experimental results are supported by density functional theory calculations. We show that on a stoichiometric MoO3(010) surface, where Mo sites are unavailable, water adsorption is strongly disfavored. However, the introduction of surface species, which can interact with the lone pairs on the water O atom, e.g., Mo5+ atoms or surface OH groups, promotes water adsorption. Dissociation of water is favored at unsaturated Mo sites, i.e., at oxygen vacancies, while water adsorbs molecularly at hydroxyl sites.

| S-EPMC7493422 | biostudies-literature

Morphology, Photocatalytic and Antimicrobial Properties of TiO2 Modified with Mono- and Bimetallic Copper, Platinum and Silver Nanoparticles.

Project description:Noble metal nanoparticles (NMNPs) enhanced TiO2 response and extended its activity under visible light. Photocatalytic activity of TiO2 modified with noble metal nanoparticles strongly depends on the physicochemical properties of NMNPs. Among others, the differences in the size of NMNPs seems to be one of the most important factors. In this view, the effect of the metal's nanoparticles size, type and amount on TiO2 photocatalytic and biocidal activity was investigated. TiO2 modified with mono- and bimetallic nanoparticles of Pt, Cu and Ag were prepared using chemical and thermal reduction methods. Obtained nanocomposites were characterized using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and diffuse-reflectance spectroscopy (DR/UV-Vis) techniques. The photocatalytic activity was examined in 2-propanol oxidation and hydrogen generation processes. The mechanism of modified TiO2 excitation was evaluated in action spectrum measurements during phenol oxidation. A possibility of using less energy-consuming light sources as a set of light-emitting diodes (LEDs) selected based on action spectrum results was examined. It was found that the differences in NMNPs size were the result of the reduction method. Moreover, coupling with a second metal strongly affected and differentiated the photocatalytic and biocidal activity of the obtained TiO2-based photocatalysts.

| S-EPMC6722503 | biostudies-literature