Energy balance of high-energy stable acoustic cavitation within dual-frequency sonochemical reactor.
Ontology highlight
ABSTRACT:
SUBMITTER: Kerboua K
PROVIDER: S-EPMC7872890 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:An intermediate-scale reactor with 10L capacity and two transducers operating at 700 and 950 kHz frequencies was developed to study the scalability of the sonolytic destruction of Per and Polyfluoroalkyl substance (PFAS). The impact of frequency, height of liquid or power density, and transducer position on reactor performance was evaluated with the potassium iodide (KI) oxidation and calorimetric power. The dual frequency mode of operation has a synergistic effect based on the triiodide concentration, and calorimetric power. The triiodide concentration, and calorimetric power were higher in this mode compared to the combination of both frequencies operating individually. The sonochemical efficiency for an intermediate-scale reactor (10L) was similar that obtained from a bench-scale reactor (2L), showing the scalability of the sonolytic technology. The placement of the transducer at the bottom or side wall of the reactor had no significant impact on the sonochemical reactivity. The superposition of the ultrasonic field from the dual transducer mode (side and bottom) did not produce a synergistic effect compared to the single transducer mode (bottom or side). This can be attributed to a disturbance due to the interaction of ultrasonic fields of two frequencies from each transducer. With the encouraging results scaling up is in progress for site implementation.
| S-EPMC10374601 | biostudies-literature
Project description:The spherical stability of an acoustic cavitation bubble under dual-frequency excitation is investigated numerically. The radial dynamics is described by the Keller-Miksis equation, which is a second-order ordinary differential equation. The surface dynamics is modelled by a set of linear ordinary differential equation according to Hao and Prosperetti (1999), which takes into account the effect of vorticity by boundary layer approximation. Due to the large amount of investigated parameter combinations, the numerical computations were carried out on graphics processing units. The results showed that for bubble size between RE=2μm and 4μm, the combination of a low and a high frequency, and the combination of two close but not equal frequencies are important to prevent the bubble losing its shape stability, while reaching the chemical threshold (Rmax/RE=3) (Kalmár et al., 2020). The phase shift between harmonic components of dual-frequency excitation has no effect on the shape stability.
| S-EPMC8350425 | biostudies-literature
Project description:Photo-acoustic spectroscopy (PAS) is one of the most sensitive non-destructive analysis techniques for gases, fluids and solids. It can operate background-free at any wavelength and is applicable to microscopic and even non-transparent samples. Extension of PAS to broadband wavelength coverage is a powerful tool, though challenging to implement without sacrifice of wavelength resolution and acquisition speed. Here we show that dual-frequency comb spectroscopy (DCS) and its potential for unmatched precision, speed and wavelength coverage can be combined with the advantages of photo-acoustic detection. Acoustic wave interferograms are generated in the sample by dual-comb absorption and detected by a microphone. As an example, weak gas absorption features are precisely and rapidly sampled; long-term coherent averaging further increases the sensitivity. This novel approach of dual-frequency comb photo-acoustic spectroscopy (DCPAS) generates unprecedented opportunities for rapid and sensitive multi-species molecular analysis across all wavelengths of light.
| S-EPMC7441402 | biostudies-literature
Project description:Investigation of the cavitation activity during ultrasonic treatment of magnesium particles during nanostructuring has been performed. Cavitation activity is recorded in the continuous mode after switching the ultrasound on with the use of ICA-5DM cavitometer. It has been demonstrated that this characteristic of the cavitation zone may be varied in a wide range of constant output parameters of the generator. The speed and nature of the cavitation activity alteration depended on the concentration of Mg particles in the suspension and the properties of the medium in which the sonochemical treatment has been performed. Three stages of the cavitation area evolution can be distinguished: 1 - the initial increase in cavitation activity, 2 - reaching a maximum with a subsequent decrease, and 3 - reaching the plateau (or the repeated cycles with feedback loops of enlargement/reduction of the cavitation activity). The ultrasonically treated magnesium particles have been characterized by scanning electron microscopy, X-ray diffraction analysis and thermal analysis. Depending on the nature of the dispersed medium the particles can be characterized by the presence of magnesium hydroxide (brucite) and magnesium hydride. It is possible to reach the incorporation of magnesium hydride in the magnesium hydroxide/magnesium matrix by varying the conditions of ultrasonic treatment (duration of treatment, amplitude, dispersed medium etc.). The influence of the magnesium reactivity is also confirmed by the measurements of cavitation activity in organic dispersed media (ethanol, ethylene glycol) and their aqueous mixtures.
| S-EPMC7786532 | biostudies-literature
Project description:Hydrodynamic cavitation reactors are of great promise for the applications of chemical process intensification and water treatment. In this work, a novel cylindrical rotational hydrodynamic cavitation reactor (CRHCR) with rectangular grooves and oblique tooth protrusions on the rotor surface was studied. The three-dimensional characterization of cavitation within the CRHCR was observed from the front and left views by the high-speed camera experiments. Interestingly, a new phenomenon of simultaneous formation of the attached cavitation and shear cavitation was found in the CRHCR. The synergistic effect of attached cavitation and shear cavitation contributes to the enhancement of the cavitation performance of CRHCR. In addition, the evolution of attached cavitation is explored. It is found that attached cavitation forms a trapezoidal-shaped cavitation cloud in the groove, which undergoes three various stages: incipient, development, and collapse. Finally, the pulsation frequency and cavitation intensity of shear cavitation in the chamber were investigated. The results show that the cavitation pulsation frequency is the same at the same rotational speed in the chamber near diverse oblique teeth. As the rotational speed increases, the cavitation pulsation frequency increases linearly. These findings in this paper are of great benefit to understanding the mechanism of the cavitation effect of CRHCR.
| S-EPMC11295464 | biostudies-literature
Project description:The present work consists of an innovative approach aiming to address the scalability dilemma of the sonochemical activity dependency of acoustic frequency. The study originates from the discordance of observations between the theoretical investigations of the sonochemical activity of the single acoustic cavitation bubble in function of the acoustic frequency, in one hand, and the experimental findings regarding the optimal frequency condition, mainly in terms of pollutant degradation, in the other hand. A single bubble and an up-scaled model of the sonochemical activity are suggested and simulations were conducted based on both of them over the frequencies 20, 200, 300, 360, 443, 500, 600 and 800 kHz under an oxygen atmosphere. The results reveal that the sonochemical production at single bubble scale is monotonously decreasing with the increase of frequency, while all the products demonstrate an absolute optimum of sonochemical production at 200 kHz, except HO• that attains its maximum molar yield under 300 kHz. Besides, the production of the predominant species, namely HO2•, HO• and O3, manifests a clear rebound at 500 kHz. All the present results were compared to and confirmed by experimental findings, while the scalability of the concentrations of sonochemically produced species was discussed using a parameter we introduced as "the mass focusing factor".
| S-EPMC7786541 | biostudies-literature
Project description:Acoustic cavitation, generated by a piezo-driven transducer, is a commonly used technique in a variety of processes, from homogenization, emulsification, and intensification of chemical reactions to surface cleaning and wastewater treatment. An ultrasonic horn, the most commonly used acoustic cavitation device, creates unique cavitation conditions under the horn tip that depend on various parameters such as the tip diameter, the driving frequency of the horn, its amplitude, and fluid properties. Unlike for hydrodynamic cavitation, the scaling laws for acoustic cavitation are poorly understood. Empirical relationships between cavitation dynamics, ultrasonic horn operating conditions, and fluid properties were found through systematic characterization of cavitation under the tip. Experiments were conducted in distilled water with various sodium chloride salt concentrations under different horn amplitudes, tip geometries, and ambient pressures. Cavitation characteristics were monitored by high-speed (200,000 fps) imaging, and numerous relations were found between operating conditions and cavitation dynamics. The compared results are discussed along with a proposal of a novel acoustic cavitation parameter and its relationship to the size of the cavitation cloud under the horn tip. Similar to the classical hydrodynamic cavitation number, the authors propose for the first time an acoustic cavitation parameter based on experimental results.
| S-EPMC9472072 | biostudies-literature
Project description:Hydrodynamic cavitation (HC) has been widely considered a promising technique for industrial-scale process intensifications. The effectiveness of HC is determined by the performance of hydrodynamic cavitation reactors (HCRs). The advanced rotational HCRs (ARHCRs) proposed recently have shown superior performance in various applications, while the research on the structural optimization is still absent. The present study, for the first time, identifies optimal structures of the cavitation generation units of a representative ARHCR by combining genetic algorithm (GA) and computational fluid dynamics, with the objectives of maximizing the total vapor volume, Vvapor , and minimizing the total torque of the rotor wall, M→z . Four important geometrical factors, namely, diameter (D), interaction distance (s), height (h), and inclination angle (θ), were specified as the design variables. Two high-performance fitness functions for Vvapor and M→z were established from a central composite design with 25 cases. After performing 10,001 simulations of GA, a Pareto front with 1630 non-dominated points was obtained. The results reveal that the values of s and θ of the Pareto front concentrated on their lower (i.e., 1.5 mm) and upper limits (i.e., 18.75°), respectively, while the values of D and h were scattered in their variation regions. In comparison to the original model, a representative global optimal point increased the Vvapor by 156% and decreased the M→z by 14%. The corresponding improved mechanism was revealed by analyzing the flow field. The findings of this work can strongly support the fundamental understanding, design, and application of ARHCRs for process intensifications.
| S-EPMC8551246 | biostudies-literature
Project description:Hydrodynamic cavitation (HC) has emerged as one of the most potential technologies for industrial-scale water treatment. The advanced rotational hydrodynamic cavitation reactors (ARHCRs) that appeared recently have shown their high effectiveness and economical efficiency compared with conventional devices. For the interaction-type ARHCRs where cavitation is generated from the interaction between the cavitation generation units (CGUs) located on the rotor and the stator, their flow field, cavitation generation mechanism, and interaction process are still not well defined. The present study experimentally and numerically investigated the cavitation flow characteristics in a representative interaction-type ARHCR which has been proposed in the past. The cavitation generation mechanism and development process, which was categorized into "coinciding", "leaving", and "approaching" stages, were analyzed explicitly with experimental flow visualization and computational fluid dynamics (CFD) simulations. The changes in the cavitation pattern, area ratio, and sheet cavitation length showed high periodicity with a period of 0.5 ms/cycle at a rotational speed of 3,600 rpm in the flow visualization. The experimental and CFD results indicated that sheet cavitation can be generated on the downstream sides of both the moving and the static CGUs. The sheet cavitation was induced and continuously enlarged in the "leaving" and "approaching" stages and was crushed after the moving CGUs coincided with the static CGUs. In addition, vortex cavitation was formed in the vortex center of each CGU due to high-speed rotating fluid motion. The shape and size of the vortex cavitation were determined by the compression effect produced by the interaction. The findings of this work are important for the fundamental understanding, design, and application of the ARHCRs in water treatment.
| S-EPMC7786598 | biostudies-literature
Project description:Passive cavitation detection has been an instrumental technique for measuring cavitation dynamics, elucidating concomitant bioeffects, and guiding ultrasound therapies. Recently, techniques have been developed to create images of cavitation activity to provide investigators with a more complete set of information. These techniques use arrays to record and subsequently beamform received cavitation emissions, rather than processing emissions received on a single-element transducer. In this paper, the methods for performing frequency-domain delay, sum, and integrate passive imaging are outlined. The method can be applied to any passively acquired acoustic scattering or emissions, including cavitation emissions. To compare data across different systems, techniques for normalizing Fourier transformed data and converting the data to the acoustic energy received by the array are described. A discussion of hardware requirements and alternative imaging approaches is additionally outlined. Examples are provided in MATLAB.
| S-EPMC5344809 | biostudies-literature