Dataset Information

Development of a rapid field testing method for metals in horizontal directional drilling residuals with XRF sensor.

ABSTRACT: Portable X-ray fluorescence (pXRF) spectrometer allows fast in-situ elemental determination without wet digestion for soils or geological materials, but the use of XRF on wet materials is not well documented. Our objective was to develop a rapid field method using pXRF to measure metals in the residues from horizontal directional drilling (HDD) operations so that proper disposal decisions can be made in-situ. To establish the procedure, we spiked soil samples with 4 concentrations of Cr, Ni, Cu, Zn, As, Cd, and Pb up to 1000 mg kg^-1, and then the metal concentrations were determined by wet chemical method after drying and acid digestion (standard method), and by pXRF, also at laboratory conditions, after drying and at two different moisture conditions. The measurements by pXRF and standard method after drying and after removal of excess water (AREW) were highly correlated with slopes ranging from 0.83?±?0.01 to 1.08?±?0.01 (P??30%, excess water in samples need to be removed with a commercially available filter press to achieve high accuracy. The developed procedures reduce time of metal detection from days to about an hour which allows drilling operators to make quick decisions on soil or HDD disposal.

SUBMITTER: Zhang H

PROVIDER: S-EPMC7887265 | biostudies-literature | 2021 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Development of a rapid field testing method for metals in horizontal directional drilling residuals with XRF sensor.

Zhang Hailin H Antonangelo João J Penn Chad C

Scientific reports 20210216 1

Portable X-ray fluorescence (pXRF) spectrometer allows fast in-situ elemental determination without wet digestion for soils or geological materials, but the use of XRF on wet materials is not well documented. Our objective was to develop a rapid field method using pXRF to measure metals in the residues from horizontal directional drilling (HDD) operations so that proper disposal decisions can be made in-situ. To establish the procedure, we spiked soil samples with 4 concentrations of Cr, Ni, Cu, ...[more]

PMID: 33594166

Similar Datasets

Project description:The rock geomechanical properties are the key parameters for designing the drilling and fracturing operations and for programing the geomechanical earth models. During drilling, the horizontal-section drilling fluids interact with the reservoir rocks in different exposure time, and to date, there is no comprehensive work performed to study the effect of the exposure time on the changes in sandstone geomechanical properties. The objective of this paper is to address the exposure time effect on sandstone failure parameters such as unconfined compressive strength, tensile strength, acoustic properties, and dynamic elastic moduli while drilling horizontal sections using barite-weighted water-based drilling fluid. To simulate the reservoir conditions, Buff Berea sandstone core samples were exposed to the drilling fluid (using filter press) under 300 psi differential pressure and 200 °F temperature for different exposure times (up to 5 days). The rock characterization and geomechanical parameters were evaluated as a function of the exposure time. Scratch test was implemented to evaluate rock strength, while ultrasonic pulse velocity was used to obtain the sonic data to estimate dynamic elastic moduli. The rock characterization was accomplished by X-ray diffraction, nuclear magnetic resonance, and scanning electron microscope. The study findings showed that the rock compression and tensile strengths reduced as a function of exposure time (18% and 19% reduction for tensile strength and unconfined compression strength, respectively, after 5 days), while the formation damage displayed an increasing trend with time. The sonic results demonstrated an increase in the compressional and shear wave velocities with increasing exposure time. All the dynamic elastic moduli showed an increasing trend when extending the exposure time except Poisson's ratio which presented a constant behavior after 1 day. Nuclear magnetic resonance results showed 41% porosity reduction during the five days of mud interaction. Scanning electron microscope images showed that the rock internal surface topography and internal integrity changed with exposure time, which supported the observed strength reduction and sonic variation. A new set of empirical correlations were developed to estimate the dynamic elastic moduli and failure parameters as a function of the exposure time and the porosity with high accuracy.

Project description:This study investigates the toxicological effects of heavy metals on lithofacies of the subsurface in a drilled hydrocarbon well as well as, to the drilling crew and people in an environment. The pollution levels of selected heavy metals were considered alongside their ecological effects during dry and wet seasons. The health hazard potential of human exposures to the metals, were estimated in terms of intensity and time using the USEPA recommended model. The heavy metal concentration for each layer decreased across the lithofacies as follows; Layer 5> Layer 4> Layer 3> Layer 2> Layer 1. The average concentrations of the heavy metals present in the samples obtained from the formation zone, varied significantly and decreased in the order of Al> Zn> Ni> Pb> Cr> Cu> Cd> As> Hg. The highest concentration of Al, Cu, and Zn in this present study were within the maximum allowable limits whereas, those of As, Cd, Hg and Ni were all above their maximum allowable limits. Among the transition metals analysed, the maximum mean daily dose of Pb (9.18 × 10-6 mg/kg/d) and Cr (1.42 × 10-6 mg/kg/d) were confirmed susceptible to human carcinogens and environmental toxins. The estimated hazard quotient shows that the dermal pathway is the most likely route via which the drilling crew and people in the environment can get contaminated. The cancer risk values for the Pb (7.72 × 10-4), Cd (1.35 × 10-1), Ni (9.97 × 10-3), As (1.50 × 10-1) and Cr (3.16 × 10-3) are all above the acceptable values. The cancer risk contribution for each metal was in the order of As> Cd> Ni> Cr> Pb. Layer 5 had the maximum Geo-accumulation index for the heavy metals considered. This higher Geo-accumulation index noted at the depth in Layer 5 may be attributed to the effect of water basin with turbidity currents, deltas, and shallow marine sediment deposits with storm impacted conditions. Also, the pollution from lead (Pb) in the dry season was maximum with an Igeo value> 5 for all the lithofacies considered because of the low background concentration of the metal. During the wet season, the heavy metal pollution rate was moderate for Zn whereas, it was extremely polluted with respect to Pb. The ecological risk potential of Pb shows that the associated ecological risks range from 536 - 664 in the wet season (i.e. extremely strong) and 2810 - 3480 in dry season (extremely strong). The high level of Pb pollution found in the area at such shallow depth may be due to the sedimentary folds possibly caused by the full spectrum of metamorphic rocks and primary flow structures at shallow depths. This was used to identify the environmental sensitivities of the heavy metals during the dry and wet seasons.

Dataset Information

Development of a rapid field testing method for metals in horizontal directional drilling residuals with XRF sensor.

Publications

Development of a rapid field testing method for metals in horizontal directional drilling residuals with XRF sensor.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure