Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis and electrochemical properties of environmental free l-glutathione grafted graphene oxide/ZnO nanocomposite for highly selective piroxicam sensing.

ABSTRACT: A simple and reliable strategy was proposed to engineer the glutathione grafted graphene oxide/ZnO nanocomposite (glutathione-GO/ZnO) as electrode material for the high-performance piroxicam sensor. The prepared glutathione-GO/ZnO nanocomposite was well characterized by X-ray diffraction (XRD), Fourier transform infrared spectrum (FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV). The novel nanocomposite modified electrode showed the highest electrocatalytic activity towards piroxicam (oxidation potential is 0.52 V). Under controlled experimental parameters, the proposed sensor exhibited good linear responses to piroxicam concentrations ranging from 0.1 to 500 ?M. The detection limit and sensitivity were calculated as 1.8 nM and 0.2 ?A/?M·cm², respectively. Moreover, it offered excellent selectivity, reproducibility, and long-term stability and can effectively ignore the interfering candidates commonly existing in the pharmaceutical tablets and human fluids even at a higher concentration. Finally, the reported sensor was successfully employed to the direct determination of piroxicam in practical samples.

SUBMITTER: Dhanalakshmi N

PROVIDER: S-EPMC7930633 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Novel Aminosilane (APTES)-Grafted Polyaniline@Graphene Oxide (PANI-GO) Nanocomposite for Electrochemical Sensor.

Project description:Lead is a potentially toxic element (PTE) that has several adverse medical effects in humans. Its presence in the environment became prominent due to anthropogenic activities. The current study explores the use of newly developed composite materials (organic-inorganic hybrid) based on PANI-GO-APTES for electrochemical detection of Pb2+ in aqueous solution. The composite material (PANI-GO-APTES) was synthesized by chemical method and was characterized with SEM, XPS, XEDS, XRD, TGA, FTIR, EIS and CV. The result of characterization indicates the successful synthesis of the intended material. The PANI-GO-APTES was successfully applied for electrochemical detection of Pb2+ using cyclic voltammetry and linear sweep voltammetry method. The limit of detection of Pb2+ was 0.0053 µM in the linear range of 0.01 µM to 0.4 µM. The current response produced during the electrochemical reduction of Pb2+ catalyzed by PANI-GO-APTES was also very repeatable, reproducible and rapid. The application of PANI-GO-APTES-modified GCE in real sample analysis was also established. Therefore, PANI-GO-APTES is presented as a potential Pb2+ sensor for environmental and human health safety.

| S-EPMC8347065 | biostudies-literature

Ag-doped ZnO nanorods embedded reduced graphene oxide nanocomposite for photo-electrochemical applications.

Project description:In this paper, the Ag-doped zinc oxide nanorods embedded reduced graphene oxide (ZnO:Ag/rGO) nanocomposite was synthesized for photocatalytic degradation of methyl orange (MO) in the water. The microstructural results confirmed the successful decoration of Ag-doped ZnO nanorods on rGO matrix. The photocatalytic properties, including photocatalytic degradation, charge transfer kinetics and photocurrent generation, are systematically investigated using electrochemical impedance spectroscopy (EIS), photocurrent transient response (PCTR) and open circuit voltage decay (OCVD). The results of photocatalytic dye degradation measurements indicated that ZnO:Ag/rGO nanocomposite is more effective than pristine ZnO to degrade the MO dye, and the degradation rate reached 40.6% in 30 min. The decomposition of MO with ZnO:Ag/rGO nanostructure followed first-order reaction kinetics with a reaction rate constant (K a) of 0.01746 min-1. The EIS, PCTR and OCVD measurements revealed that the Ag doping and incorporation of rGO could suppress the recombination probability in ZnO by the separation of photo-generated electron-hole pairs, which leads to the enhanced photocurrent generation and photocatalytic activity. The photocurrent density of ZnO:Ag/rGO, ZnO/rGO and pristine ZnO are 206, 121.4 and 88.8 nA cm-2, respectively.

| S-EPMC6408384 | biostudies-literature

Bio-functionalized graphene-graphene oxide nanocomposite based electrochemical immunosensing.

Project description:We report a novel in-situ electrochemical synthesis approach for the formation of functionalized graphene-graphene oxide (fG-GO) nanocomposite on screen-printed electrodes (SPE). Electrochemically controlled nanocomposite film formation was studied by transmission electron microscopy (TEM) and Raman spectroscopy. Further insight into the nanocomposite has been accomplished by the Fourier transformed infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA) and X-ray diffraction (XRD) spectroscopy. Configured as a highly responsive screen-printed immunosensor, the fG-GO nanocomposite on SPE exhibits electrical and chemical synergies of the nano-hybrid functional construct by combining good electronic properties of functionalized graphene (fG) and the facile chemical functionality of graphene oxide (GO) for compatible bio-interface development using specific anti-diuron antibody. The enhanced electrical properties of nanocomposite biofilm demonstrated a significant increase in electrochemical signal response in a competitive inhibition immunoassay format for diuron detection, promising its potential applicability for ultra-sensitive detection of range of target analytes.

| S-EPMC4193797 | biostudies-literature

Facile Synthesis of ?-Lactoglobulin-Functionalized Reduced Graphene Oxide and Trimetallic PtAuPd Nanocomposite for Electrochemical Sensing.

Project description:The use of graphene has leapt forward the materials field and the functional modification of graphene has not stopped. In this work, ?-lactoglobulin (BLG) was used to functionalize reduced graphene oxide (RGO) based on its amphiphilic properties. Also, trimetallic PtAuPd nanoparticles were reduced to the surface of BLG-functionalized RGO and formed BLG-PtAuPd-RGO nanocomposite using facile synthesis. Transmission electron microscopy, energy-dispersive X-ray spectroscopy and Fourier transform infrared spectra were used to characterize the nanocomposite. Electrocatalytic analysis was evaluated through cyclic voltammetry and chronoamperometry methods. We developed a glucose sensor by fabricating GOD-BLG-PtAuPd-RGO/glassy carbon (GC) electrode. It presented a remarkable sensitivity of 63.29 ?A mM-1 cm-2 (4.43 ?A mM-1), a wider linear range from 0.005 to 9 mM and a lower detection limit of 0.13 ?M (S/N = 3). Additionally, the glucose sensor exhibited excellent testing capability in human serum samples.

| S-EPMC6165462 | biostudies-literature

Fe-Doped ZnO/Reduced Graphene Oxide Nanocomposite with Synergic Enhanced Gas Sensing Performance for the Effective Detection of Formaldehyde.

Project description:Here, we report the synthesis of Fe-doped ZnO/reduced graphene oxide (rGO) nanocomposites for gas sensing applications via a one-pot hydrothermal process. A wide range of characterization techniques were used to confirm the successful fabrication of the nanocomposite material and to determine the surface area, the structural and morphological properties, the chemical composition, and the purity of the samples, such as Brunauer-Emmett-Teller, X-ray diffraction, Fourier transform infrared, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, UV-vis spectroscopy, and X-ray photoelectron spectroscopy techniques. The gas sensing performance to formaldehyde was studied thoroughly in a temperature-controlled test chamber. Compared to that of the bare ZnO and ZnO/rGO nanocomposites, the as-prepared 5 atom % Fe-doped ZnO/rGO nanocomposites presented significantly enhanced gas sensing performance to formaldehyde at relatively low temperatures. Whereas most formaldehyde sensors operate at 150 °C and can detect as low as 100 ppm concentrations, the presented sensor can detect 5 ppm formaldehyde at 120 °C. Its fast response-recovery time, high stability, and high selectivity make it an ideal sensor; however, it can exhibit degenerative gas sensing performance at elevated relative humidity. The enhanced gas sensing mechanism was explained as the synergic effect of rGO and Fe doping. The results demonstrate that Fe doping and decorating the nanocomposite with rGO are promising approaches for achieving a superior gas sensing performance for the development of ZnO gas sensors for the detection of formaldehyde.

| S-EPMC6648138 | biostudies-literature

Co2TiO4/Reduced Graphene Oxide Nanohybrids for Electrochemical Sensing Applications.

Project description:For the first time, the synthesis, characterization, and analytical application for hydrogen peroxide quantification of the hybrid materials of Co2TiO4 (CTO) and reduced graphene oxide (RGO) is reported, using in situ (CTO/RGO) and ex situ (CTO+RGO) preparations. This synthesis for obtaining nanostructured CTO is based on a one-step hydrothermal synthesis, with new precursors and low temperatures. The morphology, structure, and composition of the synthesized materials were examined using scanning electron microscopy, X-ray diffraction (XRD), neutron powder diffraction (NPD), and X-ray photoelectron spectroscopy (XPS). Rietveld refinements using neutron diffraction data were conducted to determine the cation distributions in CTO. Hybrid materials were also characterized by Brunauer-Emmett-Teller adsorption isotherms, Scanning Electron microscopy, and scanning electrochemical microscopy. From an analytical point of view, we evaluated the electrochemical reduction of hydrogen peroxide on glassy carbon electrodes modified with hybrid materials. The analytical detection of hydrogen peroxide using CTO/RGO showed 11 and 5 times greater sensitivity in the detection of hydrogen peroxide compared with that of pristine CTO and RGO, respectively, and a two-fold increase compared with that of the RGO+CTO modified electrode. These results demonstrate that there is a synergistic effect between CTO and RGO that is more significant when the hybrid is synthetized through in situ methodology.

| S-EPMC6915725 | biostudies-literature

A Bifunctional Nanosilver-Reduced Graphene Oxide Nanocomposite for Label-Free Electrochemical Immunosensing.

Project description:A bi-functional material based on silver nanoparticles (AgNPs)-reduced graphene oxide (rGO) composite for both electrode modification and signal generation is successfully synthesized for use in the construction of a label-free electrochemical immunosensor. An AgNPs/rGO nanocomposite is prepared by a one-pot wet chemical process. The AgNPs/rGO composite dispersion is simply cast on a screen-printed carbon electrode (SPCE) to fabricate the electrochemical immunosensor. It possesses a sufficient conductivity/electroreactivity and improves the electrode reactivity of SPCE. Moreover, the material can generate an analytical response due to the formation of immunocomplexes for detection of human immunoglobulin G (IgG), a model biomarker. Based on electrochemical stripping of AgNPs, the material reveals signal amplification without external redox molecules/probes. Under optimized conditions, the square wave voltammetric peak current is responded to the logarithm of IgG concentration in two wide linear ranges from 1 to 50 pg.ml-1 and 0.05 to 50 ng.ml-1, and the limit of detection (LOD) is estimated to be 0.86 pg.ml-1. The proposed immunosensor displays satisfactory sensitivity and selectivity. Importantly, detection of IgG in human serum using the immunosensor shows satisfactory accuracy, suggesting that the immunosensor possesses a huge potential for further development in clinical diagnosis.

| S-EPMC8113703 | biostudies-literature

Graphene/Nickel Oxide-Based Nanocomposite of Polyaniline with Special Reference to Ammonia Sensing.

Project description:Polyaniline@graphene/nickel oxide (Pani@GN/NiO), polyaniline/graphene (Pani/GN), and polyaniline/nickel oxide (Pani/NiO) nanocomposites and polyaniline (Pani) were successfully synthesized and tested for ammonia sensing. Pani@GN/NiO, Pani/NiO, Pani/GN, and Pani were characterized using X-ray diffraction, UV-vis spectroscopy, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. The as-prepared materials were studied for comparative dc electrical conductivity and the change in their electrical conductivity on exposure to ammonia vapors followed by ambient air at room temperature. It was observed that the incorporation of GN/NiO in Pani showed about 99 times greater amplitude of conductivity change than pure Pani on exposure to ammonia vapors followed by ambient air. The fast response and excellent recovery time could probably be ascribed to the relatively high surface area of the Pani@GN/NiO nanocomposite, proper sensing channels, and efficaciously available active sites. Pani@GN/NiO was observed to show better selectivity toward ammonia because of the comparatively high basic nature of ammonia than other volatile organic compounds tested. The sensing mechanism was explained on the basis of the simple acid-base chemistry of Pani.

| S-EPMC6644413 | biostudies-literature

Conjuncted photo-thermoelectric effect in ZnO-graphene nanocomposite foam for self-powered simultaneous temperature and light sensing.

Project description:The self-powered sensors are more and more important in current society. However, detecting both light and temperature signals simultaneously without energy waste and signal interference is still a challenge. Here, we report a ZnO/graphene nanocomposite foam-based self-powered sensor, which can realize the simultaneous detection of light and temperature by using the conjuncted photo-thermoelectric effect in ZnO-graphene nanocomposite foam sensor. The output current under light, heating and cooling of the device with the best ZnO/graphene ratio (8:1) for the foam can reach 1.75 µA, 1.02 µA and 0.70 µA, respectively, which are approximately three fold higher than them of devices with other ZnO/graphene ratios. The ZnO-graphene nanocomposite foam device also possesses excellent thermoelectric and photoelectric performances for conjuncted lighting and heating detection without mutual interference. The ZnO-graphene nanocomposite foam device exhibits a new designation on the road towards the fabrication of low cost and one-circuit-based multifunction sensors and systems.

| S-EPMC7368035 | biostudies-literature

Highly Sensitive Electrochemical Sensor for Anticancer Drug by a Zirconia Nanoparticle-Decorated Reduced Graphene Oxide Nanocomposite.

Project description:Because of their large surface area and conductivity, some inorganic materials have emerged as good candidates for the trace-level detection of pharmaceutical drugs. In the present work, we demonstrate the detection of an anticancer drug (regorafenib, REG) by using an electrochemical sensor based on a nanocomposite material. We synthesized a zirconia-nanoparticle-decorated reduced graphene oxide composite (ZrO2/rGO) using a one-pot hydrothermal method. Reduction of the graphene oxide supports of the Zr2+ ions with hydrazine hydrate helped in preventing the agglomeration of the zirconia nanoparticles and in obtaining an excellent electrocatalytic response of the nanostructure ZrO2/rGO-based electrochemical sensor. Structural and morphological characterization of the nanostructure ZrO2/rGO was performed using various analytical methods. A novel regorafenib (REG) electrochemical sensor was fabricated by immobilizing the as-prepared nanostructure ZrO2/rGO on to a glassy carbon electrode (GCE). The resulting ZrO2/rGO/GCE could be used for the rapid and selective determination of REG in the presence of ascorbic acid and uric acid. The ZrO2/rGO/GCE showed a linear response for the REG analysis in the dynamic range 11-343 nM, with a remarkable lower detection limit and limit of quantifications of 17 and 59 nM, respectively. The newly developed sensor was used for the accurate determination of REG in both serum samples and pharmaceutical formulations, with satisfactory results.

| S-EPMC6289492 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data