Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Investigation of Mechanical Strains in Thermal Compensation Loop of Superconducting NbTi Cable during Bending and Cyclic Operation.

ABSTRACT: In the paper, the thermal compensation loops on a composite, superconducting NbTi cable were investigated. This type of cable is used in the superconducting, fast ramping magnets of the SIS100 synchrotron, part of the Facility for Antiproton and Ion Research (FAIR) under construction in Darmstadt, Germany. The influence of space restrictions and electromagnetic cross-talk on the design of the thermal compensation loop was discussed. Plastic deformation of cable components during bending was analyzed by numerical simulations and experiments. A three-dimensional numerical model of the cable was prepared with individual superconducting wires in contact with a central cooling pipe. The bending of a straight cable into a compensation loop shape was simulated, followed by cyclic operation of the cable during thermal cycles. The maximum strains in the superconducting strands and cooling tube were analyzed and discussed.

SUBMITTER: Iluk A

PROVIDER: S-EPMC7956784 | biostudies-literature | 2021 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Investigation of Mechanical Strains in Thermal Compensation Loop of Superconducting NbTi Cable during Bending and Cyclic Operation.

Iluk Artur A

Materials (Basel, Switzerland) 20210226 5

In the paper, the thermal compensation loops on a composite, superconducting NbTi cable were investigated. This type of cable is used in the superconducting, fast ramping magnets of the SIS100 synchrotron, part of the Facility for Antiproton and Ion Research (FAIR) under construction in Darmstadt, Germany. The influence of space restrictions and electromagnetic cross-talk on the design of the thermal compensation loop was discussed. Plastic deformation of cable components during bending was anal ...[more]

PMID: 33652897

Similar Datasets

Advanced operation of heated fluidic resonators via mechanical and thermal loss reduction in vacuum.

Project description:For simultaneous and quantitative thermophysical measurements of ultrasmall liquid volumes, we have recently developed and reported heated fluidic resonators (HFRs). In this paper, we improve the precision of HFRs in a vacuum by significantly reducing the thermal loss around the sensing element. A vacuum chamber with optical, electrical, and microfluidic access is custom-built to decrease the convection loss by two orders of magnitude under 10-4 mbar conditions. As a result, the measurement sensitivities for thermal conductivity and specific heat capacity are increased by 4.1 and 1.6 times, respectively. When differentiating between deionized water (H2O) and heavy water (D2O) with similar thermophysical properties and ~10% different mass densities, the signal-to-noise ratio (property differences over standard error) for H2O and D2O is increased by 9 and 5 times for thermal conductivity and specific heat capacity, respectively.

| S-EPMC10564801 | biostudies-literature

Niobium-titanium (Nb-Ti) superconducting joints for persistent-mode operation.

Project description:Superconducting joints are essential for persistent-mode operation in a superconducting magnet system to produce an ultra-stable magnetic field. Herein, we report rationally designed niobium-titanium (Nb-Ti) superconducting joints and their evaluation results in detail. For practical applications, superconducting joints were fabricated by using a solder matrix replacement method with two types of lead-bismuth (Pb-Bi) solder, including Pb42Bi58 as a new composition. All the joints attained a critical current of >200 A below 1.43 T at 4.2 K. Our optimized superconducting joining method was tested in a closed-loop coil, obtaining a total circuit resistance of 3.25 × 10-14 Ω at 4.2 K in self-field. Finally, persistent-mode operation was demonstrated in an Nb-Ti solenoid coil with a persistent-current switch. This work will pave the way to developing high-performance Nb-Ti superconducting joints for practical applications.

| S-EPMC6776530 | biostudies-literature

Mechanical Control of Individual Superconducting Vortices.

Project description:Manipulating individual vortices in a deterministic way is challenging; ideally, manipulation should be effective, local, and tunable in strength and location. Here, we show that vortices respond to local mechanical stress applied in the vicinity of the vortex. We utilized this interaction to move individual vortices in thin superconducting films via local mechanical contact without magnetic field or current. We used a scanning superconducting quantum interference device to image vortices and to apply local vertical stress with the tip of our sensor. Vortices were attracted to the contact point, relocated, and were stable at their new location. We show that vortices move only after contact and that more effective manipulation is achieved with stronger force and longer contact time. Mechanical manipulation of vortices provides a local view of the interaction between strain and nanomagnetic objects as well as controllable, effective, and reproducible manipulation technique.

| S-EPMC4789753 | biostudies-literature

Cyclic mechanical stretch-induced gene expression

Project description:With gene expression profiling it was aimed to identify the differentially expressed genes associated with the regulation of the cytoskeleton to investigate the stretch-induced cell alignment mechanism. A whole genome microarray based analysis of the stretch-induced gene expression changes was done. Gene expression was measured at the beginning of the alignment process showing first reoriented cells after 5 h stretching and at the end after 24 h, where nearly all cells are aligned. Cyclic mechanical stretching of cells results in cellular alignment perpendicular to the stretch direction regulating cellular response. This stress response is assumed to be an adaptation mechanism to reduce extensive stretching but also acts as architectural restructuring changing performance and biomechanics of the tissue. Gene expression profiling of control vs. stretched primary human dermal fibroblasts after 5 h and 24 h demonstrated the regulation of differentially expressed genes associated with metabolism, differentiation and morphology. Primary human dermal fibroblasts from ten donors were cultured on Bioflex culture plates and stretched for 5h and 24 h or left untreated to avoid changes according to cell culturing. Each of the subject provided 4 samples (control/treated and 5hrs/24hrs) resulting in 40 samples total.

2014-06-11 | E-GEOD-58389 | biostudies-arrayexpress

Cyclic mechanical stretch-induced gene expression

2014-06-11 | GSE58389 | GEO

Optical diffraction for measurements of nano-mechanical bending.

Project description:We explore and exploit diffraction effects that have been previously neglected when modelling optical measurement techniques for the bending of micro-mechanical transducers such as cantilevers for atomic force microscopy. The illumination of a cantilever edge causes an asymmetric diffraction pattern at the photo-detector affecting the calibration of the measured signal in the popular optical beam deflection technique (OBDT). The conditions that avoid such detection artefacts conflict with the use of smaller cantilevers. Embracing diffraction patterns as data yields a potent detection technique that decouples tilt and curvature and simultaneously relaxes the requirements on the illumination alignment and detector position through a measurable which is invariant to translation and rotation. We show analytical results, numerical simulations and physiologically relevant experimental data demonstrating the utility of the diffraction patterns. We offer experimental design guidelines and quantify possible sources of systematic error in OBDT. We demonstrate a new nanometre resolution detection method that can replace OBDT, where diffraction effects from finite sized or patterned cantilevers are exploited. Such effects are readily generalized to cantilever arrays, and allow transmission detection of mechanical curvature, enabling instrumentation with simpler geometry. We highlight the comparative advantages over OBDT by detecting molecular activity of antibiotic Vancomycin.

| S-EPMC4891711 | biostudies-literature

Perception and control of low cable operation forces in voluntary closing body-powered upper-limb prostheses.

Project description:Operating a body-powered prosthesis can be painful and tiring due to high cable operation forces, illustrating that low cable operation forces are a desirable design property for body-powered prostheses. However, lower operation forces might negatively affect controllability and force perception, which is plausible but not known. This study aims to quantify the accuracy of cable force perception and control for body-powered prostheses in a low cable operation force range by utilizing isometric and dynamic force reproduction experiments. Twenty-five subjects with trans-radial absence conducted two force reproduction tasks; first an isometric task of reproducing 10, 15, 20, 25, 30 or 40 N and second a force reproduction task of 10 and 20 N, for cable excursions of 10, 20, 40, 60 and 80 mm. Task performance was quantified by the force reproduction error and the variability in the generated force. The results of the isometric experiment demonstrated that increasing force levels enlarge the force variability, but do not influence the force reproduction error for the tested force range. The second experiment showed that increased cable excursions resulted in a decreased force reproduction error, for both tested force levels, whereas the force variability remained unchanged. In conclusion, the design recommendations for voluntary closing body-powered prostheses suggested by this study are to minimize cable operation forces: this does not affect force reproduction error but does reduce force variability. Furthermore, increased cable excursions facilitate users with additional information to meet a target force more accurately.

| S-EPMC6874327 | biostudies-literature

Mechanical measurement of gravitropic bending force in pea sprouts.

Project description:Environmental stimuli such as gravity and light modify the plant development to optimize overall architecture. Many physiological and molecular biological studies of gravitropism and phototropism have been carried out. However, sufficient analysis has not been performed from a mechanical point of view. If the biological and mechanical characteristics of gravitropism and phototropism can be accurately grasped, then controlling the environmental conditions would be helpful to control the growth of plants into a specific shape. In this study, to clarify the mechanical characteristics of gravitropism, we examined the transverse bending moment occurring in cantilevered pea (Pisum sativum) sprouts in response to gravistimulation. The force of the pea sprouts lifting themselves during gravitropism was measured using an electronic balance. The gravitropic bending force of the pea sprouts was in the order of 100 Nmm in the conditions set for this study, although there were wide variations due to individual differences.

| S-EPMC8034668 | biostudies-literature

Nioboaeschynite-(Ce), Ce(NbTi)O(6).

Project description:Nioboaeschynite-(Ce), ideally Ce(NbTi)O(6) [cerium(III) niobium(V) titanium(IV) hexa-oxide; refined formula of the natural sample is Ca(0.25)Ce(0.79)(Nb(1.14)Ti(0.86))O(6)], belongs to the aeschynite mineral group which is characterized by the general formula AB(2)(O,OH)(6), where eight-coordinated A is a rare earth element, Ca, Th or Fe, and six-coordinated B is Ti, Nb, Ta or W. The general structural feature of nioboaeschynite-(Ce) resembles that of the other members of the aeschynite group. It is characterized by edge-sharing dimers of [(Nb,Ti)O(6)] octa-hedra which share corners to form a three-dimensional framework, with the A sites located in channels parallel to the b axis. The average A-O and B-O bond lengths in nioboaeschynite-(Ce) are 2.471 and 1.993 Å, respectively. Moreover, another eight-coordinated site, designated as the C site, is also located in the channels and is partially occupied by A-type cations. Additionally, the refinement revealed a splitting of the A site, with Ca displaced slightly from Ce (0.266 Å apart), presumably resulting from the crystal-chemical differences between the Ce(3+) and Ca(2+) cations.

| S-EPMC3414094 | biostudies-literature

A superconducting thermal switch with ultrahigh impedance for interfacing superconductors to semiconductors.

Project description:A number of current approaches to quantum and neuromorphic computing use superconductors as the basis of their platform or as a measurement component, and will need to operate at cryogenic temperatures. Semiconductor systems are typically proposed as a top-level control in these architectures, with low-temperature passive components and intermediary superconducting electronics acting as the direct interface to the lowest-temperature stages. The architectures, therefore, require a low-power superconductor-semiconductor interface, which is not currently available. Here we report a superconducting switch that is capable of translating low-voltage superconducting inputs directly into semiconductor-compatible (above 1,000 mV) outputs at kelvin-scale temperatures (1K or 4 K). To illustrate the capabilities in interfacing superconductors and semiconductors, we use it to drive a light-emitting diode (LED) in a photonic integrated circuit, generating photons at 1K from a low-voltage input and detecting them with an on-chip superconducting single-photon detector. We also characterize our device's timing response (less than 300 ps turn-on, 15 ns turn-off), output impedance (greater than 1MΩ), and energy requirements (0.18fJ/μm2,3.24mV/nW).

| S-EPMC7047719 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data