Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Integration of Stable Ionic Liquid-Based Nanofluids into Polymer Membranes. Part I: Membrane Synthesis and Characterization.

ABSTRACT: In this work, polymeric membranes functionalized with ionic liquids (ILs) and exfoliated graphene nanoplatelets (xGnP) were developed and characterized. These membranes based on graphene ionanofluids (IoNFs) are promising materials for gas separation. The stability of the selected IoNFs in the polymer membranes was determined by thermogravimetric analysis (TGA). The morphology of membranes was characterized using scanning electron microscope (SEM) and interferometric optical profilometry (WLOP). SEM results evidence that upon the small addition of xGnP into the IL-dominated environment, the interaction between IL and xGnP facilitates the migration of xGnP to the surface, while suppressing the interaction between IL and Pebax^®1657. Fourier transform infrared spectroscopy (FTIR) was also used to determine the polymer-IoNF interactions and the distribution of the IL in the polymer matrix. Finally, the thermodynamic properties and phase transitions (polymer-IoNF) of these functionalized membranes were studied using differential scanning calorimetry (DSC). This analysis showed a gradual decrease in the melting point of the polyamide (PA6) blocks with a decrease in the corresponding melting enthalpy and a complete disappearance of the crystallinity of the polyether (PEO) phase with increasing IL content. This evidences the high compatibility and good mixing of the polymer and the IoNF.

SUBMITTER: Hermida-Merino C

PROVIDER: S-EPMC7997425 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ionic Liquid Functionalized Gel Polymer Electrolytes for Stable Lithium Metal Batteries.

Project description:Metallic lithium (Li) is regarded as the ideal anode material in lithium-ion batteries due to its low electrochemical potential, highest theoretical energy density and low density. There are, however, still significant challenges to be addressed such as Li-dendrite growth and low interfacial stability, which impede the practical application of Li metal anodes. In order to circumvent these shortcomings, herein, we present a gel polymer electrolyte containing imidazolium ionic liquid end groups with a perfluorinated alkyl chain (F-IL) to achieve both high ionic conductivity and Li ion transference number by fundamentally altering the solubility of salt within the gel electrolyte through Lewis-acidic segments in the polymer backbone. Moreover, the presence of F-IL moieties decreased the binding affinity of Li cation towards the glycol chains, enabling a rapid transfer of Li cation within the gel network. These structural features enabled the immobilization of anions on the ionic liquid segments to alleviate the space-charge effect while promoting stronger anion coordination and weaker cation coordination in the Lewis-acidic polymers. Accordingly, we realized a high Li ion conductivity (9.16×10-3 S cm-1 ) and high Li ion transference number of 0.69 simultaneously, along with a good electrochemical stability up to 4.55 V, while effectively suppressing Li dendrite growth. Moreover, the gel polymer electrolyte exhibited stable cycling performance of the Li|Li symmetric cell of 9 mAh cm-2 for more than 1800 hours and retained 86.7 % of the original capacity after 250 cycles for lithium-sulfur (Li-S) full cell.

| S-EPMC8518060 | biostudies-literature

Ionic liquid-modified MCM-41-polymer mixed matrix membrane for butanol pervaporation.

Project description:Because of the preferential butanol selectivity of some ionic liquids (ILs), an increasing amount of research has appeared regarding their application in butanol separation. In this research, two ionic liquids, namely, 1-ethyl-3-vinylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([EVIM][Tf2N], IL1) and N-octyl-pyridinium bis[(trifluoromethyl)sulfonyl]imide ([OMPY][Tf2N], IL2), were applied to modify a mesoporous molecular sieve MCM-41. The IL-modified MCM-41 samples were characterized by XPS, BET, XRD, SEM and TEM. The ionic liquid-modified MCM-41 was incorporated into the polymer PEBA to prepare mixed matrix membranes to study the influences of the filling of IL-modified MCM-41 and operating conditions on the performance of the mixed matrix membrane for butanol pervaporation. The results indicated that the pervaporation performance of the PEBA membrane was enhanced by the incorporation of IL-modified MCM-41. When the temperature of the feeding liquid was 35°C and the mass fraction of butanol was 2.5 wt%, the 5% MCM-41-IL2-PEBA membrane showed a permeation flux of 421.7 g m-2 h-1 and a separation factor of 25.4. The permeation flux and the separation factor of the membrane increased as the temperature of the feeding liquid increased. The results of the long-period experiment suggested that the 5% MCM-41-IL2-PEBA membrane exhibited high stability within 100 h of operation.

| S-EPMC6689585 | biostudies-literature

Enhanced Electrochemical Performance of Stable SPES/SPANI Composite Polymer Electrolyte Membranes by Enriched Ionic Nanochannels.

Project description:Herein, we present the results of sulfonated polyaniline (SPANI) and sulfonated poly(ether sulfone) (SPES) composite polymer electrolyte membranes. The membranes are established for high-temperature proton conductivity and methanol permeability to render their applicability. Composite membranes have been prepared by modifying the SPES matrix with different concentrations of SPANI (e.g., 1, 2, 5, 10, and 20 wt %). Structural and thermomechanical characterizations have been performed using the transmission electron microscopy, differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analyzer techniques. Physicochemical and electrochemical properties have been evaluated by water uptake, ion-exchange capacity, dimensional stability, and proton conductivity. Methanol permeability experiment was carried out to analyze the compatibility of prepared membranes toward direct methanol fuel cell application and found the lowest methanol permeability for PAS-5. Also, the membranes reveal excellent thermal, mechanical, and physicochemical properties for their application toward high-temperature electromembrane processes.

| S-EPMC6644880 | biostudies-literature

Cellulose-graphene quantum dot composite membranes using ionic liquid.

Project description:Selective separation of small molecules by membranes is inhibited by the performance gap between nanofiltration and ultrafiltration membranes. In this work, a membrane that can efficiently remove small molecules (> 300 Da) was created by incorporating graphene oxide quantum dots (GQDs) into a cellulose membrane using an ionic liquid (1-ethyl-3-methylimidazolium acetate). Incorporation of GQD into cellulose membranes using an ionic liquid brings several advantages over traditional mixed matrix membranes: 1) GQDs are abundant in peripheral hydroxyl and carboxyl groups, thus GQDs have strong binding with cellulose through hydrogen bonding and forms a stable composite membrane. 2) Negative surface charge of GQDs helps prevent aggregation. 3) The size (5 nm) of GQD is smaller than most nanoparticles used in membranes, allowing for interesting pore forming properties. GQD-cellulose membranes were prepared by non-solvent induced phase separation in water. It was determined that about 45% of GQDs are incorporated from solution to membrane. GQDs were determined to be located on the membrane surface, giving the membrane negative surface charge and improved hydrophilicity. GQDs showed no leaching after convective flow through the membrane. Impact of GQD on membrane permeability and rejection was studied through convective flow experiments, and through longer term permeability studies.

| S-EPMC7039517 | biostudies-literature

Ionic Liquid Composite Polybenzimidazol Membranes for High Temperature PEMFC Applications.

Project description:A series of proton exchange membranes based on polybenzimidazole (PBI) were prepared using the low cost ionic liquids (ILs) derived from 1-butyl-3-methylimidazolium (BMIM) bearing different anions as conductive fillers in the polymeric matrix with the aim of enhancing the proton conductivity of PBI membranes. The composite membranes prepared by casting method (containing 5 wt. % of IL) exhibited good thermal, dimensional, mechanical, and oxidative stability for fuel cell applications. The effects of anion, temperature on the proton conductivity of phosphoric acid-doped membranes were systematically investigated by electrochemical impedance spectroscopy. The PBI composite membranes containing 1-butyl-3-methylimidazolium-derived ionic liquids exhibited high proton conductivity of 0.098 S·cm-1 at 120 °C when tetrafluoroborate anion was present in the polymeric matrix. This conductivity enhancement might be attributed to the formed hydrogen-bond networks between the IL molecules and the phosphoric acid molecules distributed along the polymeric matrix.

| S-EPMC6523944 | biostudies-literature

Synthesis of a New Imidazole Amino Acid Ionic Liquid Polymer and Selective Adsorption Performance for Tea Polyphenols.

Project description:A series of imidazolium ionic liquid monomers with L-Proline anions (ViImCn-L-Pro and (ViIm)2Cn(L-Pro)2) were firstly synthesized, after which new copolymer materials were prepared by polymerization of the ionic liquid monomers with N,N'-methylene diacrylamide (MBA). Polymerization conditions, including the ratio of Ils(ViImCn-L-Pro or (ViIm)2Cn(L-Pro)2) and MBA, solvent, ionic liquids and initiator's amount, were investigated and found to have an important effect on the adsorption capacity. Polymerization conditions were shown to have more significant impacts on adsorption capacities in the following order: the ratio of Ils and MBA > the amount of initiator > ionic liquids > solvent. The polymers were characterized by IR, EA, SEM, particle size distribution and TG. One of the polymers exhibited the highest selective adsorption capacity of tea polyphenols (521 mg/g). which was significantly higher than other adsorption media. The absorbed tea polyphenols could be desorbed readily with 2% hydrochloric acid methanol solution as eluent. The polymer material could maintain a higher adsorption capacity after four reuses. Based on this polymer, a new method for the efficient separation of tea polyphenols from tea water could be developed.

| S-EPMC7598198 | biostudies-literature

A Review on Ionic Liquids-Based Membranes for Middle and High Temperature Polymer Electrolyte Membrane Fuel Cells (PEM FCs).

Project description:Today, the use of polymer electrolyte membranes (PEMs) possessing ionic liquids (ILs) in middle and high temperature polymer electrolyte membrane fuel cells (MT-PEMFCs and HT-PEMFCs) have been increased. ILs are the organic salts, and they are typically liquid at the temperature lower than 100 °C with high conductivity and thermal stability. The membranes containing ILs can conduct protons through the PEMs at elevated temperatures (more than 80 °C), unlike the Nafion-based membranes. A wide range of ILs have been identified, including chiral ILs, bio-ILs, basic ILs, energetic ILs, metallic ILs, and neutral ILs, that, from among them, functionalized ionic liquids (FILs) include a lot of ion exchange groups in their structure that improve and accelerate proton conduction through the polymeric membrane. In spite of positive features of using ILs, the leaching of ILs from the membranes during the operation of fuel cell is the main downside of these organic salts, which leads to reducing the performance of the membranes; however, there are some ways to diminish leaching from the membranes. The aim of this review is to provide an overview of these issues by evaluating key studies that have been undertaken in the last years in order to present objective and comprehensive updated information that presents the progress that has been made in this field. Significant information regarding the utilization of ILs in MT-PEMFCs and HT-PEMFCs, ILs structure, properties, and synthesis is given. Moreover, leaching of ILs as a challenging demerit and the possible methods to tackle this problem are approached in this paper. The present review will be of interest to chemists, electrochemists, environmentalists, and any other researchers working on sustainable energy production field.

| S-EPMC8196583 | biostudies-literature

Liquid-like Poly(ionic liquid) as Electrolyte for Thermally Stable Lithium-Ion Battery.

Project description:A liquid-like poly(ionic liquid) (PIL) with a very low glass transition temperature of -51 °C and a thermal decomposition temperature of 202.7 °C was synthesized. A PIL-based electrolyte by mixing this poly(ionic liquid) with additives of 10 wt % propylene carbonate and 0.1 M LiClO4 is proved to be an excellent electrolyte for lithium-ion battery. The obtained PIL-based electrolyte exhibits a high ionic conductivity of 8.3 × 10-5 S cm-1 at 25 °C and 2.0 × 10-4 S cm-1 at 60 °C and a wide electrochemical potential window up to 5.61 V at 25 °C and 4.14 V at 60 °C. The Li/LiFePO4 batteries equipped with this PIL-based electrolyte achieve high capacity, outstanding cycling stability and rate capability at 25 °C, and even improved performance at high temperature like 60 °C. Such excellent performances of batteries are attributed to the formation of stable solid-electrolyte interface film at the lithium-electrolyte interface and the stability of electrolyte during cycling.

| S-EPMC6645412 | biostudies-literature

Stable prenucleation mineral clusters are liquid-like ionic polymers.

Project description:Calcium carbonate is an abundant substance that can be created in several mineral forms by the reaction of dissolved carbon dioxide in water with calcium ions. Through biomineralization, organisms can harness and control this process to form various functional materials that can act as anything from shells through to lenses. The early stages of calcium carbonate formation have recently attracted attention as stable prenucleation clusters have been observed, contrary to classical models. Here we show, using computer simulations combined with the analysis of experimental data, that these mineral clusters are made of an ionic polymer, composed of alternating calcium and carbonate ions, with a dynamic topology consisting of chains, branches and rings. The existence of a disordered, flexible and strongly hydrated precursor provides a basis for explaining the formation of other liquid-like amorphous states of calcium carbonate, in addition to the non-classical behaviour during growth of amorphous calcium carbonate.

| S-EPMC3247826 | biostudies-other

Oligomannan synthesis using ionic liquid supported glycosylation.

Project description:The synthesis of complex oligosaccharides has been a challenge for researchers. Herein, we describe a strategy for the synthesis of an activated oligomannan 1 that employs ionic liquid (IL) support glycosylation methodology on an IL-tagged mannosyl fluoride donor. This method is capable of rapidly producing linear alpha(1-->6) oligomannan thioglycosides in a convenient and cost-effective manner without the need of column purification after each glycosylation step.

| S-EPMC2533115 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data