Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effective Removal of Crystal Violet Dye Using Neoteric Magnetic Nanostructures Based on Functionalized Poly(Benzofuran-co-Arylacetic Acid): Investigation of the Adsorption Behaviour and Reusability.

ABSTRACT: Synthetic dyes represent a significant class of contaminants released in the environment. Crystal violet is a triarylmethane dye used in several fields such as printing inks, the textile or paper industries, as well as in cell histology. Coating magnetic nanoparticles with functionalized polymers has been proved to improve their efficiency, offering unique properties for applications in wastewater treatment. The current paper focuses on preparing and characterising magnetic core-shell nanoparticles coated with poly(benzofuran-co-arylacetic acid) functionalized with folic acid as an organic shell. The new polymer-based magnetic nanostructures were applied for crystal violet extraction from aqueous solutions. The nanostructures were structurally and morphologically investigated by Fourier-transform infrared (FTIR) spectroscopy and transmission electron microscopy (TEM). While thermal and magnetic properties of the magnetic nanostructures were determined by thermogravimetric analysis (TGA) and magnetization measurements (VSM). At the same time, crystal violet concentrations were determined by UV-VIS spectroscopy. The influence of initial dye concentration and contact time on the removal efficiency has been studied to achieve the optimum adsorption conditions. The dye adsorbent neoteric magnetic nanostructure was easily desorbed and reused, the adsorption capacity decreasing from 100% to 97.63% in the first five cycles, reaching a minimum of 88.74% after the 10th recycling step.

SUBMITTER: Ganea IV

PROVIDER: S-EPMC7999123 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Chemically Modified Polyvinyl Chloride for Removal of Thionine Dye (Lauth's Violet).

Project description:The chemical modification of hydrophobic polymer matrices is an alternative way to elchange their surface properties. The introduction of sulfonic groups in the polymer changes the surface properties such as adhesion, wettability, catalytic ability, and adsorption capacity. This work describes the production and application of chemically modified polyvinyl chloride (PVC) as adsorbent for dyes removal. Chemical modification of PVC was evaluated by infrared spectroscopy and elemental analysis, which indicated the presence of sulfonic groups on PVC. The chemically modified PVC (PVCDS) showed an ion exchange capacity of 1.03 mmol-1, and efficiently removed the thionine dye (Lauth's violet) from aqueous solutions, reaching equilibrium in 30 min. The adsorption kinetics was better adjusted for a pseudo second order model. This result indicates that the adsorption of thionine onto PVCDS occurs by chemisorption. Among the models for the state of equilibrium, SIPS and Langmuir exhibited the best fit to the experimental results and PVCDS showed high adsorption capacities (370 mg-1). Thus, it is assumed that the system presents homogeneous characteristics to the distribution of active sites. The modification promoted the formation of surface characteristics favorable to the dye adsorption by the polymer.

| S-EPMC5706245 | biostudies-other

Azo-Dye-Functionalized Polycarbonate Membranes for Textile Dye and Nitrate Ion Removal.

Project description:Challenges exist in the wastewater treatment of dyes produced by the world's growing textiles industry. Common problems facing traditional wastewater treatments include low retention values and breaking the chemical bonds of some dye molecules, which in some cases can release byproducts that can be more harmful than the original dye. This research illustrates that track-etched polycarbonate filtration membranes with 100-nanometer diameter holes can be functionalized with azo dye direct red 80 at 1000 µM, creating a filter that can then be used to remove the entire negatively charged azo dye molecule for a 50 µM solution of the same dye, with a rejection value of 96.4 ± 1.4%, at a stable flow rate of 114 ± 5 µL/min post-functionalization. Post-functionalization, Na+ and NO3- ions had on average 17.9%, 26.0%, and 31.1% rejection for 750, 500, and 250 µM sodium nitrate solutions, respectively, at an average flow rate of 177 ± 5 µL/min. Post-functionalization, similar 50 µM azo dyes had increases in rejection from 26.3% to 53.2%. Rejection measurements were made using ultraviolet visible-light spectroscopy for dyes, and concentration meters using ion selective electrodes for Na+ and NO3- ions.

| S-EPMC9030370 | biostudies-literature

Adsorption of Remazol Brilliant Violet-5R Textile Dye from Aqueous Solutions by Using Eggshell Waste Biosorbent.

Project description:Based on the well-known excellent adsorbent ability of chicken eggshells, the adsorptive capacity and mechanism of Remazol Brilliant Violet-5R (RBV-5R) dye by eggshell was investigated. Exploiting the high surface-area-to-volume ratio and porous structure of this natural adsorbent, the developed procedure showed to be useful for the efficient adsorption of RBV-5R dye from contaminated water. The protocol was thoroughly optimized by investigating the effect of the dye concentration, biomass-contaminated water ratio, particle size of the adsorbent, pH and temperature, as they are key factors in the efficiency of the dye removal process. The eggshell material was characterized by different types of microscopy techniques (stereo, polarization, SEM) as well as elemental analysis (element distribution mapping, EDX), Raman spectroscopy and BET-surface density measurements. EDX, FTIR and Raman spectroscopy proved the presence of the adsorbed dye on the surface of the biomaterial. It was shown that under optimal conditions, the environmentally friendly and inexpensive eggshell could be a reliable adsorbent for Remazol dye removal from wastewater.

| S-EPMC7239865 | biostudies-literature

CO2-Activated Adsorption: A New Approach to Dye Removal by Chitosan Hydrogel.

Project description:This study focuses on development of a new adsorption technique by CO2-activated chitosan. Carbon dioxide was utilized to form the functional chemical groups of chitosan on the adsorptions of anionic dyes, Brilliant Blue FCF and Congo Red, in the aqueous solution. CO2-activated chitosan results in the dye adsorption significantly faster than that of chitosan in pure water. The adsorption capacities and removal efficiencies of the dye are increased by CO2-activated chitosan. Furthermore, the dye adsorptions on CO2-activated chitosan were investigated at various temperatures and initial dye concentrations in the aqueous solution. Interestingly, the high temperature adsorption provides the enhancement of adsorption capacities and removal efficiencies of the dye by the carbamate cross-linking of chitosan with CO2. CO2-activated chitosan was further characterized by Fourier transform infrared spectra, amino group ratio, zeta potential, and thermal gravimetric analysis. These characterizations can be used for understanding the unique adsorption of the dye on CO2-activated chitosan. Carbon dioxide-activated chitosan in this work will provide an effective operation and a clean process of dye adsorption in wastewater treatment.

| S-EPMC6644823 | biostudies-literature

Super adsorption capability from amorphousization of metal oxide nanoparticles for dye removal.

Project description:Transitional metal oxide nanoparticles as advanced environment and energy materials require very well absorption performance to apply in practice. Although most metal oxides are based on crystalline, high activities can also be achieved with amorphous phases. Here, we reported the adsorption behavior and mechanism of methyl blue (MB) on the amorphous transitional metal oxide (Fe, Co and Ni oxides) nanoparticles, and we demonstrated that the amorphousization of transitional metal oxide (Fe, Co and Ni oxides) nanoparticles driven by a novel process involving laser irradiation in liquid can create a super adsorption capability for MB, and the maximum adsorption capacity of the fabricated NiO amorphous nanostructure reaches up to 10584.6 mgg(-1), the largest value reported to date for all MB adsorbents. The proof-of-principle investigation of NiO amorphous nanophase demonstrated the broad applicability of this methodology for obtaining new super dyes adsorbents.

| S-EPMC4356953 | biostudies-literature

Bathurst Burr (Xanthium spinosum) Powder-A New Natural Effective Adsorbent for Crystal Violet Dye Removal from Synthetic Wastewaters.

Project description:A new natural adsorbent material, Bathurst burr powder, was used to remove crystal violet dye from synthetic wastewaters. Particle size distribution and SEM and FTIR analyses were performed to characterize it. The effect of the operational adsorption process parameters (pH, ionic strength, initial dye concentration, adsorbent dose, contact time, temperature) onto the adsorption process was evaluated in a batch system. Equilibrium, kinetic, and thermodynamic studies were performed in order to understand the adsorption process. Taguchi method and ANOVA test were used to optimize the dye adsorption conditions and to establish the percentage contribution of each factor, respectively. The accuracy of the Taguchi prediction method was analyzed by correlating the predicted dye removal efficiency with the experimentally determined one. The particle size distribution analysis showed that 82.15% of the adsorbent particles have an average size below 0.5 mm. The adsorption process followed the Langmuir isotherm and pseudo-second order kinetic model. Maximum adsorption capacity value (164.10 mg·g-1) was higher compared to many similar adsorbents. The process was endothermic, spontaneous, and favorably involving a physisorption mechanism. The Taguchi method showed that the most influential controllable factor was pH (65% contribution in adsorption efficiency) and the data analysis indicates a very good accuracy of the experimental design (R2 = 0.994). The obtained results demonstrated that Bathurst burr powder can be used as a cheap and efficient adsorbent for crystal violet dye removal from aqueous solution.

| S-EPMC8510156 | biostudies-literature

Cucurbituril-Functionalized Nanocomposite as a Promising Industrial Adsorbent for Rapid Cationic Dye Removal.

Project description:A supramolecular cucurbit[6]uril (CB[6])-enriched magnetic montmorillonite (CBCM) nanocomposite was prepared and characterized. CB[6] played a prominent role as a capping agent, helping in better distribution of the nanoparticles, and as a binder between nanoparticles. Montmorillonite provided structural stability and fortified ultrafast adsorption toward dyes. Its application in the removal of cationic dyes from wastewater was systematically assessed. Process parameters such as pH, initial dye concentration, dosage, temperature, and time were optimized. Kinetics and isotherms of the process were described using pseudo-second-order kinetics and the Langmuir isotherm, respectively. CBCM exhibited rapid dye removal capacity in short reaction times with q max of 199.20, 78.31, and 55.62 mg g-1 and K2 of 0.0281, 0.0.0823, and 0.0953 L mg-1 min-1 for crystal violet, methylene blue, and rhodamine B, respectively. Benefiting from the synergetic effects of montmorillonite surface hydrophobicity, abundant carbonyl groups of CB[6], and magnetic properties of copper ferrite, CBCM demonstrated outstanding dye removal capacity, negligible leaching at saturation, and high tolerance toward harsh conditions. This intrinsic nature is expedient in prolonged industrial operations. To demonstrate industrial viability, syringe filtration and continuous flow fixed-bed column operations were validated. The CBCM fixed-bed column demonstrated stable dye removal efficiency with 10-100 mg mL-1 dye at 10-50 mL min-1 flow rates. Utilizing the magnetic and catalytic activities of the copper ferrite nanoparticles, CBCM was recycled using a magnet, regenerated, and reused for several cycles. CB[6] remarkably improved the performance of the nanocomposite and made it suitable for different effluent treatment techniques. This may pave a sustainable way toward the efficient onsite treatment of effluent at the industrial scale.

| S-EPMC7860087 | biostudies-literature

Investigations of adsorption and photoluminescence properties of encapsulated Al-ZnO nanostructures: Synthesis, morphology and dye degradation studies.

Project description:This study focuses on the solution combustion approach to examine the nanostructures of undoped and doped ZnO with different concentrations of Al (0.1 % and 0.2 %). Various physical techniques were utilized to characterize the synthesized nanoparticles. X-ray diffraction (XRD) revealed the crystalline materials, while scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) findings confirmed the products with particle size and the insertion of Al into the ZnO lattice. Fourier-transform infrared spectra (FTIR) confirmed the presence of different functional groups in the obtained material. The results indicate that Al-doped ZnO (Al-ZnO) nanoparticles show promising properties for optoelectronics and photoluminescence. Photoluminescence analysis indicated that an increase in Al3+ (0.2 %) concentration resulted in a decrease in peak intensity and an increase in the full width at half maximum. The band gap was calculated using the Taucs plot. The study also highlights the effectiveness of Zn1-xAlxO nanostructures in degrading organic pollutants, particularly in adsorbing Malachite Green (MG) dye. Among the samples, the 0.2 % Al-doped ZnO exhibited superior dye degradation efficiency due to its enhanced adsorption capacity and smaller particle size, as evidenced by multilayer adsorption capacity and chemisorption during the degradation process. This study provides valuable insights into the potential applications of Al-doped ZnO nanoparticles in various environmental and technological fields, emphasizing their significance in the degradation of organic pollutants.

| S-EPMC11298942 | biostudies-literature

Structural Characterization and Adsorption Properties of Dunino Raw Halloysite Mineral for Dye Removal from Water.

Project description:In this work, raw halloysite mineral from Dunino (Poland) has been characterized and tested as an efficient and low-cost adsorbent for dye removal from water. The morphology and structure of this clay were characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) and the chemical composition was evaluated by means of X-ray fluorescence spectroscopy (XRF), energy dispersive X-ray spectroscopy (EDX), and electron energy loss spectroscopy (EELS). The results showed that it is made up of both platy and tubular structures, mainly composed of Si, Al, and O. Iron oxide particles covering the platy structures were also observed. The surface charge of halloysite was measured by z-potential measurements and by the evaluation of the point of zero charge. The clay was tested as an adsorbent for the removal of positively and negatively charged dye molecules, i.e., methylene blue (MB) and methyl orange (MO), both separately and in a mixed-dye solution. Halloysite showed the ability to efficiently and selectively remove MB molecules by adsorption, both in a single-dye solution and in a mixed one. The adsorption of positive dyes on the clay surface mainly occurred through ion exchange at negatively charged sites on its surface. The possibility of regenerating the clay for further dye removal processes is also shown.

| S-EPMC8269871 | biostudies-literature

A new cotton functionalized with iron(III) trimer-like metal framework as an effective strategy for the adsorption of triarylmethane dye: An insight into the dye adsorption processes.

Project description:A new Cotton@Fe-BTC composite formed by Fe-BTC (BTC-H3: trimesic acid) metal framework (Fe-BTC MOF loading as high 38 wt %) supported by cellulose fiber is synthesized in aqueous media using a simple and green preparation method, described for the first time in this manuscript. This new strategy relies on the synergetic effect of the pure cellulose and MOFs frameworks resulting in hybrid nanofibers of MOFs@cellulose composite. A complete characterization of the composite material reveals its structural similarity to MIL-100(Fe), a Fe-BTC material. The Cotton@Fe-BTC composite potential use as an eco-friendly and low-cost adsorbent was evaluated for its adsorptive performance for the removal of dye belonging to the triarylmethane dye family (Malachite Green (MQ), Brilliant Green (BG), Pararosaniline (PR), Basic Fuchsine (BF), Crystal Violet (CV), Methyl Green (Met-G), Victoria Blue B (VB), Acid Fuchsin (AF) and Aniline Blue (AB)) in aqueous solution. The fast kinetics and high dye removal efficiencies (>90%) obtained in aqueous solutions. The structure of Cotton@Fe-BTC network, contributed to the remarkable adsorption properties towards a variety of triphenylmethanedye. The interparticle studies showed two main steps in the dye adsorption processes, with the exception of AF and BG. The equilibrium adsorption capacities qe (mg/g) follow the order: AF (3.64)<Met-G (3.70)<AB (4.87)<PR (5.52)<BF (5.76)< Met-G (7.22)<CV (9.63)<BG (16.34). However, going insight the adsorption mechanisms, it was remarkable the finding that the reaction paths taking into account the influence of water molecules on the anionic dye adsorption, through the so-called solvation/desolvation penalty processes, may not be ignored. The easy preparation and manipulation of Cotton@Fe-BTC network as well as its stability and excellent performance for the adsorption makes this material a good candidate for a broad range of applications.

| S-EPMC8661022 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data