Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrolyte-Dependent Modification of Resistive Switching in Anodic Hafnia.

ABSTRACT: Anodic HfO₂ memristors grown in phosphate, borate, or citrate electrolytes and formed on sputtered Hf with Pt top electrodes are characterized at fundamental and device levels. The incorporation of electrolyte species deep into anodic memristors concomitant with HfO₂ crystalline structure conservation is demonstrated by elemental analysis and atomic scale imaging. Upon electroforming, retention and endurance tests are performed on memristors. The use of borate results in the weakest memristive performance while the citrate demonstrates clear superior memristive properties with multilevel switching capabilities and high read/write cycling in the range of 10⁶. Low temperature heating applied to memristors shows a direct influence on their behavior mainly due to surface release of water. Citrate-based memristors show remarkable properties independent on device operation temperatures up to 100 °C. The switching dynamic of anodic HfO₂ memristors is discussed by analyzing high resolution transmission electron microscope images. Full and partial conductive filaments are visualized, and apart from their modeling, a concurrency of filaments is additionally observed. This is responsible for the multilevel switching mechanism in HfO₂ and is related to device failure mechanisms.

SUBMITTER: Zrinski I

PROVIDER: S-EPMC8001223 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Configurable switching behavior in polymer-based resistive memories by adopting unique electrode/electrolyte arrangement.

Project description:The difference in resistive switching characteristics by modifying the device configuration provides a unique operating principle, which is essential for both fundamental studies and the development of future memory devices. Here, we demonstrate the poly(methyl methacrylate) (PMMA)-based resistive switching characteristics using four different combinations of electrode/electrolyte arrangement in the device geometry. From the current-voltage (I-V) measurements, all the PMMA-based devices revealed nonvolatile memory behavior with a higher ON/OFF resistance ratio (∼105-107). Significantly, the current conduction in the filament and resistive switching behavior depend majorly on the presence of Al electrode and electrochemically active silver (Ag) element in the PMMA matrix. A trap-controlled space charge limited conduction (SCLC) mechanism constitutes the resistive switching in the Al/PMMA/Al device, whereas the current conduction governed by ohmic behavior influences the resistive switching in the Ag-including devices. The depth-profiling X-ray photoelectron spectroscopy (XPS) study evidences the conducting filament formation processes in the PMMA-based devices. These results with different conduction mechanisms provide further insights into the understanding of the resistive switching behavior in the polymer-based devices by simply rearranging the device configuration.

| S-EPMC9036540 | biostudies-literature

Switching Power Universality in Unipolar Resistive Switching Memories.

Project description:We investigate the resistive switching power from unipolar resistive switching current-voltage characteristics in various binary metal oxide films sandwiched by different metal electrodes, and find a universal feature (the so-called universality) in the switching power among these devices. To experimentally derive the switching power universality, systematic measurements of the switching voltage and current are performed, and neither of these correlate with one another. As the switching resistance (R) increases, the switching power (P) decreases following a power law P???R(-?), regardless of the device configurations. The observed switching power universality is indicative of the existence of a commonly applicable switching mechanism. The origin of the power universality is discussed based on a metallic filament model and thermo-chemical reaction.

| S-EPMC4817028 | biostudies-literature

Self-Compliant Bipolar Resistive Switching in SiN-Based Resistive Switching Memory.

Project description:Here, we present evidence of self-compliant and self-rectifying bipolar resistive switching behavior in Ni/SiNx/n⁺ Si and Ni/SiNx/n++ Si resistive-switching random access memory devices. The Ni/SiNx/n++ Si device's Si bottom electrode had a higher dopant concentration (As ion > 1019 cm-3) than the Ni/SiNx/n⁺ Si device; both unipolar and bipolar resistive switching behaviors were observed for the higher dopant concentration device owing to a large current overshoot. Conversely, for the device with the lower dopant concentration (As ion < 1018 cm-3), self-rectification and self-compliance were achieved owing to the series resistance of the Si bottom electrode.

| S-EPMC5459000 | biostudies-other

Reversible voltage dependent transition of abnormal and normal bipolar resistive switching.

Project description:Clear understanding the mechanism of resistive switching is the important prerequisite for the realization of high performance nonvolatile resistive random access memory. In this paper, binary metal oxide MoOx layer sandwiched by ITO and Pt electrodes was taken as a model system, reversible transition of abnormal and normal bipolar resistive switching (BRS) in dependence on the maximum voltage was observed. At room temperature, below a critical maximum voltage of 2.6?V, butterfly shaped I-V curves of abnormal BRS has been observed with low resistance state (LRS) to high resistance state (HRS) transition in both polarities and always LRS at zero field. Above 2.6?V, normal BRS was observed, and HRS to LRS transition happened with increasing negative voltage applied. Temperature dependent I-V measurements showed that the critical maximum voltage increased with decreasing temperature, suggesting the thermal activated motion of oxygen vacancies. Abnormal BRS has been explained by the partial compensation of electric field from the induced dipoles opposite to the applied voltage, which has been demonstrated by the clear amplitude-voltage and phase-voltage hysteresis loops observed by piezoelectric force microscopy. The normal BRS was due to the barrier modification at Pt/MoOx interface by the accumulation and depletion of oxygen vacancies.

| S-EPMC5107888 | biostudies-other

Interfacial chemical bonding-mediated ionic resistive switching.

Project description:In this paper, we present a unique resistive switching (RS) mechanism study of Pt/TiO2/Pt cell, one of the most widely studied RS system, by focusing on the role of interfacial bonding at the active TiO2-Pt interface, as opposed to a physico-chemical change within the RS film. This study was enabled by the use of a non-conventional scanning probe-based setup. The nanoscale cell is formed by bringing a Pt/TiO2-coated atomic force microscope tip into contact with a flat substrate coated with Pt. The study reveals that electrical resistance and interfacial bonding status are highly coupled together. An oxygen-mediated chemical bonding at the active interface between TiO2 and Pt is a necessary condition for a non-polar low-resistance state, and a reset switching process disconnects the chemical bonding. Bipolar switching mode did not involve the chemical bonding. The nature of chemical bonding at the TiO2-metal interface is further studied by density functional theory calculations.

| S-EPMC5430901 | biostudies-literature

Statistical characteristics of reset switching in Cu/HfO2/Pt resistive switching memory.

Project description:A major challenge of resistive switching memory (resistive random access memory (RRAM)) for future application is how to reduce the fluctuation of the resistive switching parameters. In this letter, with a statistical methodology, we have systematically analyzed the reset statistics of the conductive bridge random access memory (CBRAM) with a Cu/HfO2/Pt structure which displays bipolar switching property. The experimental observations show that the distributions of the reset voltage (V reset) and reset current (I reset) are greatly influenced by the initial on-state resistance (R on) which is closely related to the size of the conductive filament (CF) before the reset process. The reset voltage increases and the current decreases with the on-state resistance, respectively, according to the scatter plots of the experimental data. Using resistance screening method, the statistical data of the reset voltage and current are decomposed into several ranges and the distributions of them in each range are analyzed by the Weibull model. Both the Weibull slopes of the reset voltage and current are demonstrated to be independent of the on-state resistance which indicates that no CF dissolution occurs before the reset point. The scale factor of the reset voltage increases with on-state resistance while that of the reset current decreases with it. These behaviors are fully in consistency with the thermal dissolution model, which gives an insight on the physical mechanism of the reset switching. Our work has provided an inspiration on effectively reducing the variation of the switching parameters of RRAM devices.

| S-EPMC4493841 | biostudies-literature

Non-thermal resistive switching in Mott insulator nanowires.

Project description:Resistive switching can be achieved in a Mott insulator by applying current/voltage, which triggers an insulator-metal transition (IMT). This phenomenon is key for understanding IMT physics and developing novel memory elements and brain-inspired technology. Despite this, the roles of electric field and Joule heating in the switching process remain controversial. Using nanowires of two archetypal Mott insulators-VO2 and V2O3 we unequivocally show that a purely non-thermal electrical IMT can occur in both materials. The mechanism behind this effect is identified as field-assisted carrier generation leading to a doping driven IMT. This effect can be controlled by similar means in both VO2 and V2O3, suggesting that the proposed mechanism is generally applicable to Mott insulators. The energy consumption associated with the non-thermal IMT is extremely low, rivaling that of state-of-the-art electronics and biological neurons. These findings pave the way towards highly energy-efficient applications of Mott insulators.

| S-EPMC7293290 | biostudies-literature

Nonvolatile Resistive Switching Memory Utilizing Cobalt Embedded in Gelatin.

Project description:This study investigates the preparation and electrical properties of Al/cobalt-embedded gelatin (CoG)/ indium tin oxide (ITO) resistive switching memories. Co. elements can be uniformly distributed in gelatin without a conventional dispersion procedure, as confirmed through energy dispersive X-ray analyzer and X-ray photoelectron spectroscopy observations. With an appropriate Co. concentration, Co. ions can assist the formation of an interfacial AlOx layer and improve the memory properties. High ON/OFF ratio, good retention capability, and good endurance switching cycles are demonstrated with 1 M Co. concentration, in contrast to 0.5 M and 2 M memory devices. This result can be attributed to the suitable thickness of the interfacial AlOx layer, which acts as an oxygen reservoir and stores and releases oxygen during switching. The Co. element in a solution-processed gelatin matrix has high potential for bio-electronic applications.

| S-EPMC5793530 | biostudies-literature

Tuning of resistive memory switching in electropolymerized metallopolymeric films.

Project description:A diruthenium complex capped with two triphenylamine units was polymerized by electrochemical oxidation to afford metallopolymeric films with alternating diruthenium and tetraphenylbenzidine structures. The obtained thin films feature rich redox processes associated with the reduction of the bridging ligands (tetra(pyrid-2-yl)pyrazine) and the oxidation of the tetraphenylbenzidine and diruthenium segments. The sandwiched ITO/polymer film/Al electrical devices show excellent resistive memory switching with a low operational voltage, large ON/OFF current ratio (100-1000), good stability (500 cycles tested), and long retention time. In stark contrast, devices with polymeric films of a related monoruthenium complex show poor memory performance. The mechanism of the field-induced conductivity of the diruthenium polymer film is rationalized by the formation of a charge transfer state, as supported by DFT calculations.

| S-EPMC5811141 | biostudies-literature

Self-Selecting Resistive Switching Scheme Using TiO2 Nanorod Arrays.

Project description:In this study, the resistive switching scheme using TiO2 nanorod arrays synthesized by a large-scale and low-cost hydrothermal process was reported. Especially, the nonlinear I-V characteristics of TiO2 nanorod arrays with a nonlinearity of up to ~10, which suppress the leakage current less than 10-4?Acm-2, were demonstrated, exhibiting a self-selecting resistive switching behavior. It provides a simple pathway for integration of RRAM crossbar arrays without additional stacking of active devices. The mechanisms of the nonlinear resistive switching behaviors were discussed in detail. In addition, the maximum array numbers of 79 for self-selecting RRAM cells were estimated. The results demonstrate an opportunity of using the concept of self-selecting resistive switching characteristics in a single material, which offers a new strategy to tackle the sneak path issue of RRAM in the crossbar arrays structure.

| S-EPMC5437035 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data