Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Removing Acrylic Conformal Coating with Safer Solvents for Re-Manufacturing Electronics.

ABSTRACT: Conformal coating is typically composed of polymeric film and is used to protect delicate electronic components such as printed-circuit boards. Without removing conformal coating, it would be difficult to repair these complicated electronics. Methylene chloride, also called dichloromethane (DCM), has a widespread usage in conformal coating stripper products. The high toxicity of DCM increases human health risk when workers are exposed to DCM during the conformal coating removal processes. Therefore, the replacement of DCM would be beneficial to greatly improve the overall safety profile for workers in the electronics and coating industries. This research identified and evaluated alternative chemicals for replacing DCM used in acrylic conformal coating stripping operations. The solubility of an acrylic conformal coating was measured and characterized using Hansen solubility parameters (HSP) theory. Coating dwell time tests using various solvent blends verified the accuracy of the created HSP solubility sphere. A data processing method was also developed to identify and screen potential alternative solvent blends in terms of safety, toxicity, and cost-effectiveness. The identified safer solvent blends were demonstrated to provide equivalent stripping performance as compared to DCM based coating strippers within an acceptable cost range. The results of this research will be of value to other types of conformal coatings, such as silicone and polyurethane, where DCM is commonly used in similar coating stripping operations. By safely removing conformal coating, delicate electronics would be available for re-manufacturing, enabling a circular economy.

SUBMITTER: Lu T

PROVIDER: S-EPMC8002995 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Electrodeposition of Polyporous Sn-Ni Coating in Deep Eutectic Solvents for Removing Organic Dyes.

Project description:Materials with a high specific surface area including a porous structure have been widely researched due to the applicability in the adsorption of various organic dyes. However, further application of porous materials is limited by the complicated and expensive preparation process. Herein, a Sn-Ni coating with a polyporous structure is successfully prepared via a simple and high-efficiency electrodeposition approach in deep eutectic solvents (DESs). The prepared Sn-Ni coating exhibits a uniform polyporous structure with a diameter of 15 μm. Furthermore, the coating shows excellent adsorption capacity in the removal of acid grain black organic dyestuff. With the rise of preparation temperature from 85 to 105 °C, the electrochemical active surface area and the ratio of nickel increase, which further enhance dye adsorption capacity.

| S-EPMC9670719 | biostudies-literature

Cell-repellent polyampholyte for conformal coating on microstructures.

Project description:Repellent coatings are critical for the development of biomedical and analytical devices to prevent nonspecific protein and cell adhesion. In this study, prevelex (polyampholytes containing phosphate and amine units) was synthesized for the fine coating of microdevices for cell culture. The dip-coating of the prevelex on hydrophobic substrates altered their surfaces to be highly hydrophilic and electrically neutral. The range of prebake temperature (50-150 °C) after dip-coating was moderate and within a preferable range to treat typical materials for cell culture such as polystyrene and polydimethylsiloxane. Scanning electron microscopy revealed a conformal and ultra-thin film coating on the micro/nano structures. When compared with poly(2-hydroxyethyl methacrylate) and poly(2-methacryloyloxyethyl phosphorylcholine), prevelex exhibited better characteristics for coating on microwell array devices, thereby facilitating the formation of spheroids with uniform diameters using various cell types. Furthermore, to examine cellular functionalities, mouse embryonic epithelial and mesenchymal cells were seeded in a prevelex-coated microwell array device. The two types of cells formed hair follicle germ-like aggregates in the device. The aggregates were then transplanted to generate de novo hair follicles in nude mice. The coating material provided a robust and fine coating approach for the preparation of non-fouling surfaces for tissue engineering and biomedical applications.

| S-EPMC9233689 | biostudies-literature

A tool for identifying green solvents for printed electronics.

Project description:The emerging field of printed electronics uses large amounts of printing and coating solvents during fabrication, which commonly are deposited and evaporated within spaces available to workers. It is in this context unfortunate that many of the currently employed solvents are non-desirable from health, safety, or environmental perspectives. Here, we address this issue through the development of a tool for the straightforward identification of functional and "green" replacement solvents. In short, the tool organizes a large set of solvents according to their Hansen solubility parameters, ink properties, and sustainability descriptors, and through systematic iteration delivers suggestions for green alternative solvents with similar dissolution capacity as the current non-sustainable solvent. We exemplify the merit of the tool in a case study on a multi-solute ink for high-performance light-emitting electrochemical cells, where a non-desired solvent was successfully replaced by two benign alternatives. The green-solvent selection tool is freely available at: www.opeg-umu.se/green-solvent-tool .

| S-EPMC8302666 | biostudies-literature

Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics.

Project description:Electronics that are capable of intimate, non-invasive integration with the soft, curvilinear surfaces of biological tissues offer important opportunities for diagnosing and treating disease and for improving brain/machine interfaces. This article describes a material strategy for a type of bio-interfaced system that relies on ultrathin electronics supported by bioresorbable substrates of silk fibroin. Mounting such devices on tissue and then allowing the silk to dissolve and resorb initiates a spontaneous, conformal wrapping process driven by capillary forces at the biotic/abiotic interface. Specialized mesh designs and ultrathin forms for the electronics ensure minimal stresses on the tissue and highly conformal coverage, even for complex curvilinear surfaces, as confirmed by experimental and theoretical studies. In vivo, neural mapping experiments on feline animal models illustrate one mode of use for this class of technology. These concepts provide new capabilities for implantable and surgical devices.

| S-EPMC3034223 | biostudies-literature

Transparency induced in opals via nanometer thick conformal coating.

Project description:Self-assembled periodic structures out of monodisperse spherical particles, so-called opals, are a versatile approach to obtain 3D photonic crystals. We show that a thin conformal coating of only several nanometers can completely alter the reflection properties of such an opal. Specifically, a coating with a refractive index larger than that of the spherical particles can eliminate the first photonic band gap of opals. To explain this non-intuitive effect, where a nm-scaled coating results in a drastic change of optical properties at wavelengths a hundred times bigger, we split the permittivity distribution of the opal into a lattice function convoluted with that of core-shell particles as a motif. In reciprocal space, the Bragg peaks that define the first Brillouin zone can be eliminated if the motif function, which is multiplied, assumes zero at the Bragg peak positions. Therefore, we designed a non-monotonic refractive index distribution from the center of the particle through the shell into the background and adjusted the coating thickness. The theory is supported by simulations and experiments that a nanometer thin TiO2 coating via atomic layer deposition (ALD) on synthetic opals made from polystyrene particles induces nearly full transparency at a wavelength range where the uncoated opal strongly reflects. This effect paves the way for sensing applications such as monitoring the thicknesses growth in ALD in-situ and in real time as well as measuring a refractive index change without spectral interrogation.

| S-EPMC6684641 | biostudies-literature

Conformal Coating of Freestanding Particles by Vapor-Phase Infiltration.

Project description:A novel atomic layer method for encapsulating individual micro- and nano-particles with thin (sub-10-nm) dielectric films is presented. This method leverages the diffusion of vapor-phase precursors through an underlying inert polymer film to achieve growth of a metal oxide film on all sides of the particle simultaneously; even on the side that is in contact with the substrate. Crucially, the deposition is performed on stationary particles and does not require an agitation mechanism or a special reaction chamber. Here, conformal coatings of alumina are shown to improve stability in aqueous environments for two optically-relevant particles: compound semiconductor laser microparticles and lead halide perovskite nanocrystals.

| S-EPMC7942784 | biostudies-literature

A conformal, bio-interfaced class of silicon electronics for mapping cardiac electrophysiology.

Project description:In all current implantable medical devices such as pacemakers, deep brain stimulators, and epilepsy treatment devices, each electrode is independently connected to separate control systems. The ability of these devices to sample and stimulate tissues is hindered by this configuration and by the rigid, planar nature of the electronics and the electrode-tissue interfaces. Here, we report the development of a class of mechanically flexible silicon electronics for multiplexed measurement of signals in an intimate, conformal integrated mode on the dynamic, three-dimensional surfaces of soft tissues in the human body. We demonstrate this technology in sensor systems composed of 2016 silicon nanomembrane transistors configured to record electrical activity directly from the curved, wet surface of a beating porcine heart in vivo. The devices sample with simultaneous submillimeter and submillisecond resolution through 288 amplified and multiplexed channels. We use this system to map the spread of spontaneous and paced ventricular depolarization in real time, at high resolution, on the epicardial surface in a porcine animal model. This demonstration is one example of many possible uses of this technology in minimally invasive medical devices.

| S-EPMC3039774 | biostudies-literature

3D-Printed Carbon-Based Conformal Electromagnetic Interference Shielding Module for Integrated Electronics.

Project description:Electromagnetic interference shielding (EMI SE) modules are the core component of modern electronics. However, the traditional metal-based SE modules always take up indispensable three-dimensional space inside electronics, posing a major obstacle to the integration of electronics. The innovation of integrating 3D-printed conformal shielding (c-SE) modules with packaging materials onto core electronics offers infinite possibilities to satisfy ideal SE function without occupying additional space. Herein, the 3D printable carbon-based inks with various proportions of graphene and carbon nanotube nanoparticles are well-formulated by manipulating their rheological peculiarity. Accordingly, the free-constructed architectures with arbitrarily-customized structure and multifunctionality are created via 3D printing. In particular, the SE performance of 3D-printed frame is up to 61.4 dB, simultaneously accompanied with an ultralight architecture of 0.076 g cm-3 and a superhigh specific shielding of 802.4 dB cm3 g-1. Moreover, as a proof-of-concept, the 3D-printed c-SE module is in situ integrated into core electronics, successfully replacing the traditional metal-based module to afford multiple functions for electromagnetic compatibility and thermal dissipation. Thus, this scientific innovation completely makes up the blank for assembling carbon-based c-SE modules and sheds a brilliant light on developing the next generation of high-performance shielding materials with arbitrarily-customized structure for integrated electronics.

| S-EPMC10786807 | biostudies-literature

Conformal Geometry and Multimaterial Additive Manufacturing through Freeform Transformation of Building Layers.

Project description:3D printing, formally known as additive manufacturing, creates complex geometries via layer-by-layer addition of materials. While 3D printing has been historically perceived as the static addition of build layers, 3D printing is now considered as a dynamic assembly process. In this context, here a new 3D printing process is reported that executes full degree-of-freedom (DOF) transformation (translating, rotating, and scaling) of each individual building layer while utilizing continuous fabrication techniques. Transforming individual building layers within the sequential layered manufacturing process enables dynamic transformation of the 3D printed parts on-the-fly, eliminating the time-consuming redesign steps. Preserving the locality of the transformation to each layer further enables the discrete conformal transformation, allowing objects such as vascular scaffolds to be optimally fabricated to properly fit within specific patient anatomy obtained from the magnetic resonance imaging (MRI) measurements. Finally, exploiting the freedom to control the orientation of each individual building layer, multimaterials, multiaxis 3D printing capability are further established for integrating functional modules made of dissimilar materials in 3D printed devices. This final capability is demonstrated through 3D printing a soft pneumatic gripper via heterogenous integration of rigid base and soft actuating limbs.

| S-EPMC8245009 | biostudies-literature

Device design and materials optimization of conformal coating for islets of Langerhans.

Project description:Encapsulation of islets of Langerhans may represent a way to transplant islets in the absence of immunosuppression. Traditional methods for encapsulation lead to diffusional limitations imposed by the size of the capsules (600-1,000 μm in diameter), which results in core hypoxia and delayed insulin secretion in response to glucose. Moreover, the large volume of encapsulated cells does not allow implantation in sites that might be more favorable to islet cell engraftment. To address these issues, we have developed an encapsulation method that allows conformal coating of islets through microfluidics and minimizes capsule size and graft volume. In this method, capsule thickness, rather than capsule diameter, is constant and tightly defined by the microdevice geometry and the rheological properties of the immiscible fluids used for encapsulation within the microfluidic system. We have optimized the method both computationally and experimentally, and found that conformal coating allows for complete encapsulation of islets with a thin (a few tens of micrometers) continuous layer of hydrogel. Both in vitro and in vivo in syngeneic murine models of islet transplantation, the function of conformally coated islets was not compromised by encapsulation and was comparable to that of unencapsulated islets. We have further demonstrated that the structural support conferred by the coating materials protected islets from the loss of function experienced by uncoated islets during ex vivo culture.

| S-EPMC4115512 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data