Monocarborane cluster as a stable fluorine-free calcium battery electrolyte.
Ontology highlight
ABSTRACT:
SUBMITTER: Kisu K
PROVIDER: S-EPMC8024376 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Metal or metal-ion-based batteries represent the mainstream battery technology, in which metal ions either participate in the electrode redox reaction or act as the charge carrier in the electrolyte. The principle guides battery designs and leads to the most widely adopted battery construction of metal-ion acceptor/metal salt in solvent/metal-ion donor. Although these architectures have seen significant progress, there are still many issues with them, including dendrite growth, solid-electrolyte interface corruption, and safety concerns. In this article, the intercalation/deintercalation of organic cations other than metal ions is explored in an all-organic battery composed of organic anode/cathode and pure ionic liquid electrolyte. This metal-free and solvent-free concept has been demonstrated by polyimide/1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide/polytriphenylamine full-cell, through which capacity near theoretical value, more than 5,000 cycling life, rate capability up to 200 C, and remarkable low-temperature performance has been achieved. Our work provides an alternate way of developing future efficient, safe, green, and versatile batteries.
| S-EPMC6482332 | biostudies-literature
Project description:A liquid-like poly(ionic liquid) (PIL) with a very low glass transition temperature of -51 °C and a thermal decomposition temperature of 202.7 °C was synthesized. A PIL-based electrolyte by mixing this poly(ionic liquid) with additives of 10 wt % propylene carbonate and 0.1 M LiClO4 is proved to be an excellent electrolyte for lithium-ion battery. The obtained PIL-based electrolyte exhibits a high ionic conductivity of 8.3 × 10-5 S cm-1 at 25 °C and 2.0 × 10-4 S cm-1 at 60 °C and a wide electrochemical potential window up to 5.61 V at 25 °C and 4.14 V at 60 °C. The Li/LiFePO4 batteries equipped with this PIL-based electrolyte achieve high capacity, outstanding cycling stability and rate capability at 25 °C, and even improved performance at high temperature like 60 °C. Such excellent performances of batteries are attributed to the formation of stable solid-electrolyte interface film at the lithium-electrolyte interface and the stability of electrolyte during cycling.
| S-EPMC6645412 | biostudies-literature
Project description:Sodium metal batteries have potentially high energy densities, but severe sodium-dendrite growth and side reactions prevent their practical applications, especially at high temperatures. Herein, we design an inorganic ionic conductor/gel polymer electrolyte composite, where uniformly cross-linked beta alumina nanowires are compactly coated by a poly(vinylidene fluoride-co-hexafluoropropylene)-based gel polymer electrolyte through their strong molecular interactions. These beta alumina nanowires combined with the gel polymer layer create dense and homogeneous solid-liquid hybrid sodium-ion transportation channels through and along the nanowires, which promote uniform sodium deposition and formation of a stable and flat solid electrolyte interface on the sodium metal anode. Side reactions between the sodium metal and liquid electrolyte, as well as sodium dendrite formation, are successfully suppressed, especially at 60?°C. The sodium vanadium phosphate/sodium full cells with composite electrolyte exhibit 95.3% and 78.8% capacity retention after 1000 cycles at 1?C at 25?°C and 60?°C, respectively.
| S-EPMC6751212 | biostudies-literature
Project description:Energy and environmental pollution have become the two major problems in today's society. The development of green energy storage devices with good safety, high reliability, high energy density and low cost are urgently demanded. Here we report on a lithium ion battery using an aqueous electrolyte solution. It is built up by using graphite coated with gel polymer membrane and LISICON as the negative electrode, and LiFePO4 in aqueous solution as the positive electrode. Its average discharge voltage is up to 3.1?V and energy density based on the two electrode materials is 258?Wh kg(-1). It will be a promising energy storage system with good safety and efficient cooling effects.
| S-EPMC4916472 | biostudies-literature
Project description:More researches have revealed that N4-acetylcytidine (ac4C) affected a variety of cellular and biological processes. In order to better understand the ac4C roles in biology and disease, we present an antibody-free, fluorine assisted metabolic sequencing method to detect RNA N4-acetylcytidine, called ‘FAM-seq’. We have successfully applied FAM-seq to profile ac4C landscapes in humans. By comparing with the classic ac4C antibody sequencing method, we demonstrated that FAM-seq is a convenient and specific method for transcriptome-wide detection of ac4C. This method holds promise to detect nascent RNA ac4C modifications.
2023-10-02 | GSE234988 | GEO
Project description:Lithium metal, the ideal anode material for rechargeable batteries, suffers from the inherent limitations of sensitivity to the humid atmosphere and dendrite growth. Herein, low-cost fabrication of a metallic-lithium anode that is stable in air and plated dendrite-free from an organic-liquid electrolyte solves four key problems that have plagued the development of large-scale Li-ion batteries for storage of electric power. Replacing the low-capacity carbon anode with a safe, dendrite-free lithium anode provides a fast charge while reducing the cost of fabrication of a lithium battery, and increasing the cycle life of a rechargeable cell by eliminating the liquid-electrolyte ethylene-carbonate additive used to form a solid-electrolyte interphase passivation layer on the anode that is unstable during cycling. This solution is accomplished by formation of a hydrophobic solid-electrolyte interphase on a metallic-lithium anode that allows for handling of the treated lithium anode membrane in a standard dry room during cell fabrication.
| S-EPMC6385276 | biostudies-literature
Project description:Environmentally friendly and cost-effective Li-ion cells are fabricated with abundant, non-toxic LiFePO4 cathodes and iron oxide anodes. A water-soluble alginate binder is used to coat both electrodes to reduce the environmental footprint. The critical reactivity of LiPF6 -based electrolytes toward possible traces of H2 O in water-processed electrodes is overcome by using a lithium bis(oxalato)borate (LiBOB) salt. The absence of fluorine in the electrolyte and binder is a cornerstone for improved cell chemistry and results in stable battery operation. A dedicated approach to exploit conversion-type anodes more effectively is also disclosed. The issue of large voltage hysteresis upon conversion/de-conversion is circumvented by operating iron oxide in a deeply lithiated Fe/Li2 O form. Li-ion cells with energy efficiencies of up to 92?% are demonstrated if LiFePO4 is cycled versus such anodes prepared through a pre-lithiation procedure. These cells show an average energy efficiency of approximately 90.66?% and a mean Coulombic efficiency of approximately 99.65?% over 320 cycles at current densities of 0.1, 0.2 and 0.3?mA?cm-2 . They retain nearly 100?% of their initial discharge capacity and provide an unmatched operation potential of approximately 2.85?V for this combination of active materials. No occurrence of Li plating was detected in three-electrode cells at charging rates of approximately 5C. Excellent rate capabilities of up to approximately 30C are achieved thanks to the exploitation of size effects from the small Fe nanoparticles and their reactive boundaries.
| S-EPMC5488250 | biostudies-other
Project description:Interfaces are essential in electrochemical processes, providing a critical nanoscopic design feature for composite electrodes used in Li-ion batteries. Understanding the structure, wetting and mobility at nano-confined interfaces is important for improving the efficiency and lifetime of electrochemical devices. Here we use a Surface Forces Apparatus to quantify the initial wetting of nanometre-confined graphene, gold and mica surfaces by Li-ion battery electrolytes. Our results indicate preferential wetting of confined graphene in comparison with gold or mica surfaces because of specific interactions of the electrolyte with the graphene surface. In addition, wetting of a confined pore proceeds via a profoundly different mechanism compared with wetting of a macroscopic surface. We further reveal the existence of molecularly layered structures of the confined electrolyte. Nanoscopic confinement of less than 4-5?nm and the presence of water decrease the mobility of the electrolyte. These results suggest a lower limit for the pore diameter in nanostructured electrodes.
| S-EPMC5007463 | biostudies-literature
Project description:Operando ambient pressure photoelectron spectroscopy in realistic battery environments is a key development towards probing the functionality of the electrode/electrolyte interface in lithium-ion batteries that is not possible with conventional photoelectron spectroscopy. Here, we present the ambient pressure photoelectron spectroscopy characterization of a model electrolyte based on 1M bis(trifluoromethane)sulfonimide lithium salt in propylene carbonate. For the first time, we show ambient pressure photoelectron spectroscopy data of propylene carbonate in the liquid phase by using solvent vapor as the stabilizing environment. This enables us to separate effects from salt and solvent, and to characterize changes in electrolyte composition as a function of probing depth. While the bulk electrolyte meets the expected composition, clear accumulation of ionic species is found at the electrolyte surface. Our results show that it is possible to measure directly complex liquids such as battery electrolytes, which is an important accomplishment towards true operando studies.
| S-EPMC6626006 | biostudies-literature
Project description:The capacity fade of modern lithium ion batteries is mainly caused by the formation and growth of the solid-electrolyte interphase (SEI). Numerous continuum models support its understanding and mitigation by studying SEI growth during battery storage. However, only a few electrochemical models discuss SEI growth during battery operation. In this article, a continuum model is developed that consistently captures the influence of open-circuit potential, current direction, current magnitude, and cycle number on the growth of the SEI. The model is based on the formation and diffusion of neutral lithium atoms, which carry electrons through the SEI. Recent short- and long-term experiments provide validation for our model. SEI growth is limited by either reaction, diffusion, or migration. For the first time, the transition between these mechanisms is modelled. Thereby, an explanation is provided for the fading of capacity with time t of the form tβ with the scaling coefficent β, 0≤β≤1. Based on the model, critical operation conditions accelerating SEI growth are identified.
| S-EPMC7496968 | biostudies-literature