Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Flame Spray Pyrolysis Co₃O₄/CoO as Highly-Efficient Nanocatalyst for Oxygen Reduction Reaction.

ABSTRACT: The oxygen reduction reaction (ORR) is the rate-limiting reaction in the cathode side of fuel cells. In the quest for alternatives to Pt-electrodes as cathodes in ORR, appropriate transition metal oxide-based electrocatalysts are needed. In the present work, we have synthesized Co₃O₄ and CoO/Co₃O₄ nanostructures using flame spray pyrolysis (FSP), as electrocatalysts for ORR in acidic and alkaline media. A detailed study of the effect of (Co-oxide)/Pt ratio on ORR efficiency shows that the present FSP-made Co-oxides are able to perform ORR at very low-Pt loading, 0.4% of total metal content. In acid medium, an electrode with (5.2% Pt + 4.8% Co₃O₄), achieved the highest ORR performance (J_max = 8.31 mA/cm², E_1/2 = 0.66 V). In alkaline medium, superior performance and stability have been achieved by an electrode with (0.4%Pt + 9.6% (CoO/Co₃O₄)) with ORR activity (J_max = 3.5 mA/cm², E_1/2 = 0.08 V). Using XRD, XPS, Raman and TEM data, we discuss the structural and electronic aspects of the FSP-made Co-oxide catalysts in relation to the ORR performance. Cyclic voltammetry data indicate that the ORR process involves active sites associated with Co³⁺ cations at the cobalt oxide surface. Technology-wise, the present work demonstrates that the developed FSP-protocols, constitutes a novel scalable process for production of co-oxides appropriate for oxygen reduction reaction electrodes.

SUBMITTER: Belles L

PROVIDER: S-EPMC8066371 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A simple method to set the spray properties for flame spray pyrolysis production of nanoparticles.

Project description:The most critical part of the flame spray pyrolysis (FSP) process is the nozzle, since it plays a key role in setting the spray properties. In this study, we developed an approach to adjust the nozzle throat gap size for a desired dispersion gas flow rate and upstream pressure, based on the external size and shape of a two phase external mixing nozzle. An equation was derived and validated by comparing the predicted gas flow rates with the data provided in a commercial nozzle supplier chart. Experiments were also conducted in our lab-scale FSP reactor to test the validity of the predictions. The approach developed here was found to closely predict the gap size necessary to pass the required dispersion gas flow at a desired pressure drop. Error in predictions was found to be less than 3% at an upstream pressure range of 3-10 bars. The isentropic flow assumption for perfect gases across the convergent-divergent nozzle was found to fail below 2 bars, consistent with the theory applied. By using the method here, the nozzle setting for a desired operation in an FSP process can be easily done, minimizing the time-consuming trial and error steps needed otherwise.

| S-EPMC7509832 | biostudies-literature

Metal Oxide (Co3O4 and Mn3O4) Impregnation into S, N-doped Graphene for Oxygen Reduction Reaction (ORR).

Project description:To address aggravating environmental and energy problems, active, efficient, low-cost, and robust electrocatalysts (ECs) are actively pursued as substitutes for the current noble metal ECs. Therefore, in this study, we report the preparation of graphene flakes (GF) doped with S and N using 2-5-dimercapto-1,3,4-thiadiazole (S3N2) as precursor followed by the immobilization of cobalt spinel oxide (Co3O4) or manganese spinel oxide (Mn3O4) nanoparticles through a one-step co-precipitation procedure (Co/S3N2-GF and Mn/S3N2-GF). Characterization by different physicochemical techniques (Fourier Transform Infrared (FTIR), Raman spectroscopy, Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD)) of both composites shows the preservation of the metal oxide spinel structure and further confirms the successful preparation of the envisaged electrocatalysts. Co/S3N2-GF composite exhibits the best ORR performance with an onset potential of 0.91 V vs. RHE, a diffusion-limiting current density of -4.50 mA cm-2 and selectivity for the direct four-electron pathway, matching the results obtained for commercial Pt/C. Moreover, both Co/S3N2-GF and Mn/S3N2-GF showed excellent tolerance to methanol poisoning and good stability.

| S-EPMC7177977 | biostudies-literature

Flame Spray Pyrolysis Synthesis of Vo-Rich Nano-SrTiO<sub>3-x</sub>.

Project description:Engineering of oxygen vacancies (Vo) in nanomaterials allows diligent control of their physicochemical properties. SrTiO3 possesses the typical ABO3 structure and has attracted considerable attention among the titanates due to its chemical stability and its high conduction band energy. This has resulted in its extensive use in photocatalytic energy-related processes, among others. Herein, we introduce the use of Flame Spray Pyrolysis (FSP); an industrial and scalable process to produce Vo-rich SrTiO3 perovskites. We present two types of Anoxic Flame Spray Pyrolysis (A-FSP) technologies using CH4 gas as a reducing source: Radial A-FSP (RA-FSP); and Axial A-FSP (AA-FSP). These are used for the control engineering of oxygen vacancies in the SrTiO3-x nanolattice. Based on X-ray photoelectron spectroscopy, Raman and thermogravimetry-differential thermal analysis, we discuss the role and the amount of the Vos in the so-produced nano-SrTiO3-x, correlating the properties of the nanolattice and energy-band structure of the SrTiO3-x. The present work further corroborates the versatility of FSP as a synthetic process and the potential future application of this process to engineer photocatalysts with oxygen vacancies in quantities that can be measured in kilograms.

| S-EPMC10891825 | biostudies-literature

Metal Oxide Quantum Dots Embedded in Silica Matrices Made by Flame Spray Pyrolysis.

Project description:Quantum dots have unique size-dependent properties and promising applications. However, their use in many applications remains hindered by mechanical, thermal, and chemical instability and the lack of viable quantum dot mass-production processes. Embedding quantum dots in matrices such as silica counteracts the instability challenges in some applications while preserving their unique properties and applicability. Here, we synthesize quantum dots of four different metal oxides embedded in a silica matrix in a one-step mass-production process using flame spray pyrolysis.

| S-EPMC8153950 | biostudies-literature

Platinum-trimer decorated cobalt-palladium core-shell nanocatalyst with promising performance for oxygen reduction reaction.

Project description:Advanced electrocatalysts with low platinum content, high activity and durability for the oxygen reduction reaction can benefit the widespread commercial use of fuel cell technology. Here, we report a platinum-trimer decorated cobalt-palladium core-shell nanocatalyst with a low platinum loading of only 2.4 wt% for the use in alkaline fuel cell cathodes. This ternary catalyst shows a mass activity that is enhanced by a factor of 30.6 relative to a commercial platinum catalyst, which is attributed to the unique charge localization induced by platinum-trimer decoration. The high stability of the decorated trimers endows the catalyst with an outstanding durability, maintaining decent electrocatalytic activity with no degradation for more than 322,000 potential cycles in alkaline electrolyte. These findings are expected to be useful for surface engineering and design of advanced fuel cell catalysts with atomic-scale platinum decoration.

| S-EPMC6347633 | biostudies-literature

Yttrium Copper Titanate as a Highly Efficient Electrocatalyst for Oxygen Reduction Reaction in Fuel Cells, Synthesized via Ultrafast Automatic Flame Technique.

Project description:Replacing platinum (Pt) metal-based electrocatalysts used in the oxygen reduction reaction (ORR) in fuel cells is an important research topic due to the high cost and scarcity of Pt, which have restricted the commercialization of these clean-energy technologies. The ABO3-type perovskite family of an ACu3Ti4O12 (A?=?Ca, Y, Bi, and La) polycrystalline material can serve as an alternative electrocatalyst for the ORR in terms of low-cost, activity, and stability. These perovskite materials may be considered the next generation electro-catalyst for the ORR because of their photocatalytic activity and physical and chemical properties capable of containing a wide range of A- and B-site metals. This paper reports the ORR activity of a new Y2/3Cu3Ti4O12 perovskite, synthesized via a rapid and facile automatic flame synthesis technique using rotating disk electrode (RDE) measurements. Y2/3Cu3Ti4O12/C has superior ORR activity, stability, and durability compared to commercial Pt/C. The results presented in this article will provide the future perspectives to research based on ACu3Ti4O12 (A?=?Ca, Y, Bi, Sm, Cd, and La) perovskite as the next generation electro-catalyst for the ORR in various electrochemical devices, such as fuel cells, metal-air batteries, and electrolysis.

| S-EPMC5571221 | biostudies-literature

Coral-like Co3O4 Decorated N-doped Carbon Particles as active Materials for Oxygen Reduction Reaction and Supercapacitor.

Project description:Coral reef has a unique dendritic structure with large specific surface area, rich pore structure, so that it can be attached to a large number of zooxanthellae for gas exchange. Coral reef ecosystems are also known as underwater rainforests. Inspired by this biological structure, we designed and fabricated coral-like Co3O4 decorated N-doped carbon particles (Co3O4/N-CP). The obtained Co3O4/N-CP-900 catalyst shows efficient ORR electrocatalytic performances in an alkaline medium with a positive onset and half-wave potentials of 0.97 and 0.90?V (vs. RHE), as well as a high diffusion-limited current density (5.50?mA?cm-2) comparable to that of a Pt/C catalyst (5.15?mA?cm-2). It also displays better stability and methanol tolerance than commercial Pt/C. In addition, the Co3O4/N-CP-900 electrode has a high specific capacitance of 316.2?F?g-1 in 6?M KOH, as well as good rate capabilities and excellent cycle performance. These results are due to large surface area, narrow pore size distribution, high density electrochemical energy conversion and storage activity centers. This method presented here offers an effective path for the development of high performance multi-functional carbon-based materials for ORR and supercapacitor applications.

| S-EPMC5789056 | biostudies-literature

Hierarchical CO(2)-protective shell for highly efficient oxygen reduction reaction.

Project description:The widespread application of intermediate-temperature solid oxide fuel cells is mainly being hurdled by the cathode's low efficiency on oxygen reduction reaction and poor resistance to carbon dioxide impurity. Here we report the fabrication of a hierarchical shell-covered porous cathode through infiltration followed by microwave plasma treatment. The hierarchical shell consists of a dense thin-film substrate with cones on the top of the substrate, leading to a three-dimensional (3D) heterostructured electrode. The shell allows the cathode working stably in CO(2)-containing air, and significantly improving the cathode's oxygen reduction reactivity with an area specific resistance of ∼0.13 Ωcm(2) at 575°C. The method is also suitable for fabricating functional shell on the irregularly shaped substrate in various applications.

| S-EPMC3309399 | biostudies-literature

Polydopamine-coated graphene nanosheets as efficient electrocatalysts for oxygen reduction reaction.

Project description:Polydopamine-modified graphene (G-PDA) materials were synthesized by in situ polymerization of a dopamine monomer on the surface of graphene oxide. X-ray photoelectron spectroscopy (XPS) has confirmed that new N-containing functional groups are formed during the synthesis process, which result in the excellent electrocatalytic activity of the composite towards ORR in terms of onset potential, number of electron transferred and limiting current density. The electrocatalytic activity of the optimized G-PDA sample is better than N-doped graphene and comparable to the commercial 20 wt% Pt/C catalyst. Furthermore, compared with the Pt-based catalysts, the G-PDA showed superior stability and methanol resistance, which favored its practical applications in fuel cells.

| S-EPMC9080247 | biostudies-literature

Partial deligandation activated ZIF-67 for efficient electrocatalytic oxygen reduction reaction

Project description:Removing the blocked molecular groups and fully exposing the intrinsic active sites of metal-organic frameworks (MOFs) could give full play to their advantages of multi-active sites and multi-channel mass transfer, which will benefit the electrocatalytic oxygen reduction reaction (ORR) in fuel cells. Here, the partial diligandation-activated ZIF-67 (named as ZIF-67–400) with excellent ORR performance was obtained by simple low-temperature pyrolysis. The ORR electrocatalytic activity exhibits a half-wave potential of 0.82 V and the stability of maintaining 96% activity after 10 h of operation, which is comparable to commercial Pt/C. Further research studies reveal that the morphology, special dodecahedron configuration, and crystal structure of ZIF-67-400 are maintained well during the pyrolysis, but some hydrocarbon groups in the ligands are eliminated, resulting in the active sites being exposed and coordinated with the intrinsic porosity, improving the catalytic performance. This work may provide an alternative path for activating the electrocatalytic performance of metal-organic frameworks by low-temperature annealing.

| S-EPMC9583129 | biostudies-literature