Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Sub-5 nm single crystalline organic p-n heterojunctions.

ABSTRACT: The cornerstones of emerging high-performance organic photovoltaic devices are bulk heterojunctions, which usually contain both structure disorders and bicontinuous interpenetrating grain boundaries with interfacial defects. This feature complicates fundamental understanding of their working mechanism. Highly-ordered crystalline organic p-n heterojunctions with well-defined interface and tailored layer thickness, are highly desirable to understand the nature of organic heterojunctions. However, direct growth of such a crystalline organic p-n heterojunction remains a huge challenge. In this work, we report a design rationale to fabricate monolayer molecular crystals based p-n heterojunctions. In an organic field-effect transistor configuration, we achieved a well-balanced ambipolar charge transport, comparable to single component monolayer molecular crystals devices, demonstrating the high-quality interface in the heterojunctions. In an organic solar cell device based on the p-n junction, we show the device exhibits gate-tunable open-circuit voltage up to 1.04 V, a record-high value in organic single crystalline photovoltaics.

SUBMITTER: Xiao M

PROVIDER: S-EPMC8119440 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Construction of Type-II Heterojunctions in Crystalline Carbon Nitride for Efficient Photocatalytic H2 Evolution.

Project description:As an encouraging photocatalyst, crystalline carbon nitride (CCN) exhibits unsatisfactory photocatalytic activity and stability due to its rapid recombination of photo-generative carriers. Herein, high-crystalline g-C3N4 was prepared, including CCN obtained in KCl (K-CCN), LiCl-KCl mixture (Li/K-CCN), and LiCl-NaCl-KCl mixture (Li/Na/K-CCN), via the molten salt strategy using pre-prepared bulk carbon nitride (BCN) as a precursor. The obtained BCN sample was formed by heptazine-based units, which convert into triazine-based units for K-CCN. Heptazine and triazine are two isotypes that co-exist in the Li/K-CCN and Li/Na/K-CCN samples. Compared with BCN and other CCN samples, the as-prepared Li/Na/K-CCN sample exhibited the optimal photocatalytic hydrogen evolution rates (3.38 mmol·g-1·h-1 under simulated sunlight and 2.25 mmol·g-1·h-1 under visible light) and the highest apparent quantum yield (10.97%). The improved photocatalytic performance of the Li/Na/K-CCN sample is mainly attributed to the construction of type-II heterojunction and the institution of the built-in electric field between triazine-based CCN and heptazine-based BCN. This work provides a new strategy for the structural optimization and heterostructure construction of crystalline carbon nitride photocatalysts.

| S-EPMC10459030 | biostudies-literature

Positioning and joining of organic single-crystalline wires.

Project description:Organic single-crystal, one-dimensional materials can effectively carry charges and/or excitons due to their highly ordered molecule packing, minimized defects and eliminated grain boundaries. Controlling the alignment/position of organic single-crystal one-dimensional architectures would allow on-demand photon/electron transport, which is a prerequisite in waveguides and other optoelectronic applications. Here we report a guided physical vapour transport technique to control the growth, alignment and positioning of organic single-crystal wires with the guidance of pillar-structured substrates. Submicrometre-wide, hundreds of micrometres long, highly aligned, organic single-crystal wire arrays are generated. Furthermore, these organic single-crystal wires can be joined within controlled angles by varying the pillar geometries. Owing to the controllable growth of organic single-crystal one-dimensional architectures, we can present proof-of-principle demonstrations utilizing joined wires to allow optical waveguide through small radii of curvature (internal angles of ~90-120°). Our methodology may open a route to control the growth of organic single-crystal one-dimensional materials with potential applications in optoelectronics.

| S-EPMC4389254 | biostudies-literature

A single crystalline porphyrinic titanium metal-organic framework.

Project description:We successfully assembled the photocatalytic titanium-oxo cluster and photosensitizing porphyrinic linker into a metal-organic framework (MOF), namely PCN-22. A preformed titanium-oxo carboxylate cluster is adopted as the starting material to judiciously control the MOF growth process to afford single crystals. This synthetic method is useful to obtain highly crystalline titanium MOFs, which has been a daunting challenge in this field. Moreover, PCN-22 demonstrated permanent porosity and photocatalytic activities toward alcohol oxidation.

| S-EPMC5707486 | biostudies-other

Solution-Processed CsPbBr3 Quantum Dots/Organic Semiconductor Planar Heterojunctions for High-Performance Photodetectors.

Project description:Planar heterojunctions (PHJs) are fundamental building blocks for construction of semiconductor devices. However, fabricating PHJs with solution-processable semiconductors such as organic semiconductors (OSCs) is a challenge. Herein, utilizing the orthogonal solubility and good wettability between CsPbBr3 perovskite quantum dots (PQDs) and OSCs, fabrication of solution-processed PQD/OSC PHJs are reported. The phototransistors based on bilayer PQD/PDVT-10 PHJs show responsivity up to 1.64 × 104 A W-1 , specific detectivity of 3.17 × 1012 Jones, and photosensitivity of 5.33 × 106 when illuminated by 450 nm light. Such high photodetection performance is attributed to efficient charge dissociation and transport, as well as the photogating effect in the PHJs. Furthermore, the tri-layer PDVT-10/PQD/Y6 PHJs are used to construct photodiodes working in self-powered mode, which exhibit broad range photoresponse from ultraviolet to near-infrared, with responsivity approaching 10-1 A W-1 and detectivity over 106 Jones. These results present a convenient and scalable production processes for solution-processed PHJs and show their great potential for optoelectronic applications.

| S-EPMC9036026 | biostudies-literature

Characterization of single 1.8-nm Au nanoparticle attachments on AFM tips for single sub-4-nm object pickup.

Project description:This paper presents a novel method for the attachment of a 1.8-nm Au nanoparticle (Au-NP) to the tip of an atomic force microscopy (AFM) probe through the application of a current-limited bias voltage. The resulting probe is capable of picking up individual objects at the sub-4-nm scale. We also discuss the mechanisms involved in the attachment of the Au-NP to the very apex of an AFM probe tip. The Au-NP-modified AFM tips were used to pick up individual 4-nm quantum dots (QDs) using a chemically functionalized method. Single QD blinking was reduced considerably on the Au-NP-modified AFM tip. The resulting AFM tips present an excellent platform for the manipulation of single protein molecules in the study of single protein-protein interactions.

| S-EPMC3835868 | biostudies-other

Shape-Selective Ultramicroporous Carbon Membranes for Sub-0.1 nm Organic Liquid Separation.

Project description:Liquid-phase chemical separations from complex mixtures of hydrocarbon molecules into singular components are large-scale and energy-intensive processes. Membranes with molecular specificity that efficiently separate molecules of similar size and shape can avoid phase changes, thereby reducing the energy intensity of the process. Here, forward osmosis molecular differentiation of hexane isomers through a combination of size- and shape-based separation of molecules is demonstrated. An ultramicroporous carbon membrane produced with 6FDA-polyimides realized the separation of isomers for different shapes of di-branched, mono-branched, and linear molecules. The draw solvents provide the driving force for fractionation of hexane isomers with a sub-0.1 nm size difference at room temperature without liquid-phase pressurization. Such membranes could perform bulk chemical separations of organic liquids to achieve major reductions in the energy intensity of the separation processes.

| S-EPMC8425864 | biostudies-literature

Phytotoxic effect of sub-3-nm crystalline ceria nanoparticles on the hydroponic growth of Daikon radish microgreens.

Project description:Cerium oxide nanoparticles (ceria NPs) have been widely used in many industrial applications. They have been proposed as a potential remedy for reducing oxidative stress in biological systems. General concerns over the toxicity of engineered ceria NPs have led to studies of their phytotoxicity in plants. Most of these plant growth studies were conducted in soil using grain crops and commercial ceria NPs of sizes from 6 nm to 100's nm. In this paper, we report our evaluation of the phytotoxicity and uptake of sub-3-nm crystalline ceria NPs by exposing Daikon radish (Raphanus sativus var. longipinnatus) microgreens to these NPs with environmentally relevant concentrations under hydroponic growth conditions. Aqueous suspensions of different concentrations of these ceria NPs (0.1 ppm, 1 ppm, and 10 ppm) were applied to these microgreens for the last 7 days of the 12-day growth period. Our results revealed the uptake of cerium by plant roots and the translocation of cerium to the stems and the cotyledons (seed leaves). The accumulation of cerium was found to be maximum at the roots, followed by the cotyledons and the stems of the plants. Even at the lowest concentration (0.1 ppm) of the sub-3-nm ceria NPs, the accumulation of cerium at the roots significantly stunted the root growth. However, these NP treatments did not show significant changes to the distributions of macro-minerals (Mg, K, and Ca) and micro-minerals (Zn and Cu) in the microgreens at the end of the 12-day growth period. The phytotoxic effect of sub-3-nm crystalline ceria nanoparticles on the hydroponic growth of Daikon radish microgreens was studied. The cerium uptake by the plant and its effect on the bioavailability of major macro-minerals and micro-minerals within the plant were examined.

| S-EPMC9216221 | biostudies-literature

Quantifying redox heterogeneity in single-crystalline LiCoO2 cathode particles.

Project description:Active cathode particles are fundamental architectural units for the composite electrode of Li-ion batteries. The microstructure of the particles has a profound impact on their behavior and, consequently, on the cell-level electrochemical performance. LiCoO2 (LCO, a dominant cathode material) is often in the form of well-shaped particles, a few micrometres in size, with good crystallinity. In contrast to secondary particles (an agglomeration of many fine primary grains), which are the other common form of battery particles populated with structural and chemical defects, it is often anticipated that good particle crystallinity leads to superior mechanical robustness and suppressed charge heterogeneity. Yet, sub-particle level charge inhomogeneity in LCO particles has been widely reported in the literature, posing a frontier challenge in this field. Herein, this topic is revisited and it is demonstrated that X-ray absorption spectra on single-crystalline particles with highly anisotropic lattice structures are sensitive to the polarization configuration of the incident X-rays, causing some degree of ambiguity in analyzing the local spectroscopic fingerprint. To tackle this issue, a methodology is developed that extracts the white-line peak energy in the X-ray absorption near-edge structure spectra as a key data attribute for representing the local state of charge in the LCO crystal. This method demonstrates significantly improved accuracy and reveals the mesoscale chemical complexity in LCO particles with better fidelity. In addition to the implications on the importance of particle engineering for LCO cathodes, the method developed herein also has significant impact on spectro-microscopic studies of single-crystalline materials at synchrotron facilities, which is broadly applicable to a wide range of scientific disciplines well beyond battery research.

| S-EPMC7285691 | biostudies-literature

Electrically Robust Single-Crystalline WTe2 Nanobelts for Nanoscale Electrical Interconnects.

Project description:As the elements of integrated circuits are downsized to the nanoscale, the current Cu-based interconnects are facing limitations due to increased resistivity and decreased current-carrying capacity because of scaling. Here, the bottom-up synthesis of single-crystalline WTe2 nanobelts and low- and high-field electrical characterization of nanoscale interconnect test structures in various ambient conditions are reported. Unlike exfoliated flakes obtained by the top-down approach, the bottom-up growth mode of WTe2 nanobelts allows systemic characterization of the electrical properties of WTe2 single crystals as a function of channel dimensions. Using a 1D heat transport model and a power law, it is determined that the breakdown of WTe2 devices under vacuum and with AlO x capping layer follows an ideal pattern for Joule heating, far from edge scattering. High-field electrical measurements and self-heating modeling demonstrate that the WTe2 nanobelts have a breakdown current density approaching ≈100 MA cm-2, remarkably higher than those of conventional metals and other transition-metal chalcogenides, and sustain the highest electrical power per channel length (≈16.4 W cm-1) among the interconnect candidates. The results suggest superior robustness of WTe2 against high-bias sweep and its possible applicability in future nanoelectronics.

| S-EPMC6364501 | biostudies-literature

Tunable organic solvent nanofiltration in self-assembled membranes at the sub-1 nm scale.

Project description:Organic solvent-stable membranes exhibiting strong selectivity and high permeance have the potential to transform energy utilization in chemical separation processes. A key goal is developing materials with uniform, well-defined pores at the 1-nm scale, with sizes that can be tuned in small increments with high fidelity. Here, we demonstrate a class of organic solvent-stable nanoporous membranes derived from self-assembled liquid crystal mesophases that display such characteristics and elucidate their transport properties. The transport-regulating dimensions are defined by the mesophase geometry and can be controlled in increments of ~0.1 nm by modifying the chemical structure of the mesogen or the composition of the mesophase. The highly ordered nanostructure affords previously unidentified opportunities for the systematic design of organic solvent nanofiltration membranes with tailored selectivity and permeability and for understanding and modeling rejection in nanoscale flows. Hence, these membranes represent progress toward the goal of enabling precise organic solvent nanofiltration.

| S-EPMC8926336 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data