Dataset Information

Sodium caseinate as a particulate emulsifier for making indefinitely recycled pH-responsive emulsions.

ABSTRACT: pH-responsive emulsions are one of the simplest and most readily implementable stimuli-responsive systems. However, their practical uses have been greatly hindered by cyclability. Here, we report a robust pH-responsive emulsion prepared by utilizing pure sodium caseinate (NaCas) as the sole emulsifier. We demonstrate that the emulsification/demulsification of the obtained NaCas-stabilized emulsion can be triggered by simply changing the pH value over 100 cycles, which has never been observed in any protein-stabilized emulsion system. The NaCas-stabilized emulsion maintains its pH-responsive properties even in a saturated salt solution (NaCl ∼ 6.1 M) or seawater. We illustrate how NaCas functions in pH-responsive emulsions and show that when conventional nanoparticles such as zein protein or bare SiO₂ particles were coated with a layer of NaCas, the resulting formulated emulsions could be switched on and off over 10 cycles. The unique properties of NaCas thus enable the engineering of conventional Pickering emulsions to pH-responsive Pickering emulsions. Finally, we have integrated catalytically active gold (Au) nanoclusters (NCs) into the NaCas protein and then utilized them to produce emulsions. Remarkably, these NaCas-Au NCs assembled at the oil-water interface exhibited excellent catalytic activity and cyclability, not only in aqueous solution, but also in complicated seawater environments.

SUBMITTER: Xi Y

PROVIDER: S-EPMC8152521 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Liquid crystals are appealing in pharmaceutical and cosmetic fields due to their unique structures that combine the properties of both liquid and solid states. Forming an emulsion into liquid crystals can be affected by a number of factors, including the emulsion composition and temperature. Changing the types and concentrations of surfactants could be another factor that affects liquid crystals. Currently, most liquid crystal research focuses on the nanostructure of liquid crystal systems without evaluating the efficacy of liquid crystals clinically. In this study, liquid crystalline emulsions made from camellia seed oil with four different surfactants (Olivem 1000, Polyaquol-2W, Nikkomulese LC, and Lecinol S-10 with Tween 80) were created. The liquid crystal emulsions were formulated in the form of oil-in-water (o/w) emulsions with Camellia oleifera seed oil serving as the main ingredient in the oil phase (10% w/w). All formulations exhibited liquid crystal characteristics with lamellar structures as determined by the polarized light microscopy and small-angle X-ray scattering with supporting data of the nanostructure from wide-angle X-ray scattering and differential scanning calorimetry (DSC). They all showed good stability under normal (room temperature) and accelerated conditions (4 °C and 40 °C) in long-term storage (6 months). Using the reconstructed human epidermis as a skin model, all formulations did not cause skin irritation. In the clinical trial, all formulations were able to reduce transepidermal water loss (TEWL) and increase skin hydration immediately after application. This lasted at least 10 h. All formulations showed distinct Maltese crosses under the polarized light microscope with a positive result for liquid crystals in wide angle X-ray scattering (WAXS) and small angle X-ray scattering (SAXS) methods. Moreover, among all formulations tested, Formulation D, which contained Lecinol S-10 and Tween 80 as emulsifiers, showed the most robust interaction between the surfactant and water molecules in the lamellar structure under DSC. The formulation was stable in long-term normal and accelerated conditions. Above all, Formulation D, which was formulated with Lecinol S-10 with Tween 80, had the best clinical result, was nonirritating to the skin, and can be used as a cream base in the pharmaceutical and cosmeceutical sectors.

Project description:Poor water solubility and low bioavailability of hydrophobic flavonoids such as rutin remain as substantial challenges to their oral delivery via functional foods. In this study, the effect of pH and the addition of a protein (sodium caseinate; NaCas) on the aqueous solubility and stability of rutin was studied, from which an efficient delivery system for the incorporation of rutin into functional food products was developed. The aqueous solubility, chemical stability, crystallinity, and morphology of rutin (0.1-5% w/v) under various pH (1-11) and protein concentrations (0.2-8% w/v) were studied. To manufacture the concentrated colloidally stable rutin-NaCas particles, rutin was dissolved and deprotonated in a NaCas solution at alkaline pH before its subsequent neutralisation at pH 7. The excess water was removed using ultrafiltration to improve the loading capacity. Rutin showed the highest solubility at pH 11, while the addition of NaCas resulted in the improvement of both solubility and chemical stability. Critically, to achieve particles with colloidal stability, the NaCas:rutin ratio (w/w) had to be greater than 2.5 and 40 respectively for the lowest (0.2% w/v) and highest (4 to 8% w/v) concentrations of NaCas. The rutin-NaCas particles in the concentrated formulations were physically stable, with a size in the range of 185 to 230 nm and zeta potential of -36.8 to -38.1 mV, depending on the NaCas:rutin ratio. Encapsulation efficiency and loading capacity of rutin in different systems were 76% to 83% and 2% to 22%, respectively. The concentrated formulation containing 5% w/v NaCas and 2% w/v rutin was chosen as the most efficient delivery system due to the ideal protein:flavonoid ratio (2.5:1), which resulted in the highest loading capacity (22%). Taken together, the findings show that the delivery system developed in this study can be a promising method for the incorporation of a high concentration of hydrophobic flavonoids such as rutin into functional foods.

Dataset Information

Sodium caseinate as a particulate emulsifier for making indefinitely recycled pH-responsive emulsions.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets