Color-encoded single-shot computer-generated Moire profilometry.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhang H
PROVIDER: S-EPMC8155059 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Recently, a computer-generated moiré profilometry was proposed by our research group. It can effectively avoid the influence of the transient caused by moiré fringes' direct acquisition and generally owns a higher accuracy. But when the spatial spectrum of the captured deformed pattern is severely aliased caused by the measured object, the accuracy of this method may be affected to some extent due to the impure background light component extraction. So, a high precision computer-generated moiré profilometry based on background light component's accurate elimination is proposed. By adding an additional special phase-shifting sinusoidal grating to accurately extract valid information in the spatial domain and improve the sinusoidal feature of the pattern, the measurement precision can be improved effectively. Though the single-shot feature is broken, the real-time measuring feature is still maintained successfully. Experimental results show the feasibility and validity of the proposed method.
| S-EPMC6534590 | biostudies-literature
Project description:By using the time-division multiplexing characteristics of the projector and the integral exposure characteristics of the charge coupled device (CCD) camera, a super-grayscale and real-time computer-generated Moiré profilometry based on video grating projection is proposed. The traditional digital static grating is of 256-grayscale at most. If an expected super-grayscale grating with a maximum grayscale of 766 is designed and divided into three 256-grayscale fringe patterns with balanced grayscale as far as possible, they can be synthesized into a repeated playing video grating instead of the traditional static grating. When the video grating is projected onto the measured object, as long as the exposure time is set to three times the refresh cycle of the video grating, the super-grayscale deformed patterns in the 766-grayscale can be captured with a 10-bit CCD camera, so that the deformed patterns are realistic. The digital error in computer-generated Moiré profilometry is effectively reduced. In addition, this method can expand the linear range of the deformed pattern by 20% in computer Moiré profilometry. Therefore, the proposed method has the perspectives of high accuracy and real-time measurement. Theoretical analysis and experimental results demonstrate the validity and capability of the proposed method.
| S-EPMC8494878 | biostudies-literature
Project description:We present a new technique for quantitative phase and amplitude microscopy from a single color image with coded illumination. Our system consists of a commercial brightfield microscope with one hardware modification-an inexpensive 3D printed condenser insert. The method, color-multiplexed Differential Phase Contrast (cDPC), is a single-shot variant of Differential Phase Contrast (DPC), which recovers the phase of a sample from images with asymmetric illumination. We employ partially coherent illumination to achieve resolution corresponding to 2× the objective NA. Quantitative phase can then be used to synthesize DIC and phase contrast images or extract shape and density. We demonstrate amplitude and phase recovery at camera-limited frame rates (50 fps) for various in vitro cell samples and c. elegans in a micro-fluidic channel.
| S-EPMC5289592 | biostudies-literature
Project description:Regulating the fluorescent properties of organic small molecules in a controlled and dynamic manner has been a fundamental research goal. Although several strategies have been exploited, realizing multi-color molecular emission from a single fluorophore remains challenging. Herein, we demonstrate an emissive system by combining pyrene fluorophore and acylhydrazone units, which can generate multi-color switchable fluorescent emissions at different assembled states. Two kinds of supramolecular tools, amphiphilic self-assembly and ?-cyclodextrin mediated host-guest recognition, are used to manipulate the intermolecular aromatic stacking distances, resulting in the tunable fluorescent emission ranging from blue to yellow, including a pure white-light emission. Moreover, an external chemical signal, amylase, is introduced to control the assembly states of the system on a time scale, generating a distinct dynamic emission system. The dynamic properties of this multi-color fluorescent system can be also enabled in a hydrogel network, exhibiting a promising potential for intelligent fluorescent materials.
| S-EPMC6952351 | biostudies-literature
Project description:Various approaches are being pursued to realize compact optical elements with the ability to manipulate light, but it is difficult to simultaneously achieve high reflectivity and the ability to see through the element. Here, we present a reflective computer-generated hologram that is completely transparent in the visible, based on the Berry (geometric) phase in a self-organizing Bragg reflector. The Bragg reflector has a helical dielectric tensor distribution with the phase information imprinted in the distribution of the optic axis on the substrate. The structure possesses only a single Fourier component and high-order reflections are suppressed; thus, the device appears completely transparent by setting the main reflection band outside the visible range for all angles of incidence accessible by ambient light. On the other hand, the encoded phase information can be played back using visible light by increasing the accessible incidence angle, which we demonstrate experimentally by (i) attaching a coupling prism, and (ii) integrating the device in a waveguide. Bragg-Berry reflectors thus enable a new route to realize advanced optical elements with no apparent reflection in the visible region.
| S-EPMC7235227 | biostudies-literature
Project description:Standard fluorescence microscopy relies on filter-based detection of emitted photons after fluorophore excitation at the appropriate wavelength. Although of enormous utility to the biological community, the implementation of approaches for simultaneous multicolor fluorescence imaging is commonly challenged by the large spectral overlap between different fluorophores. Here, we describe an alternative multicolor fluorescence imaging methodology that exclusively relies on the absorption spectra of the fluorophores instead of their fluorescence emissions. The method is based on multiplexing optical excitation signals in the frequency domain and using single color-blind detection. Because the spectral information is fully encoded during excitation, the method requires minimal spectral filtering on detection. This enables the simultaneous identification of multiple color channels in a single measurement with only one color-blind detector. We demonstrate simultaneous three-color confocal imaging of individual molecules and of four-target imaging on cells with excellent discrimination. Moreover, we have implemented a non-negative matrix factorization algorithm for spectral unmixing to extend the number of color targets that can be discriminated in a single measurement. Using this algorithm, we resolve six spectrally and spatially overlapping fluorophores on fixed cells using four excitation wavelengths. The methodology is fully compatible with live imaging of biological samples and can be easily extended to other imaging modalities, including super-resolution microscopy, making simultaneous multicolor imaging more accessible to the biological research community.
| S-EPMC6104530 | biostudies-literature
Project description:This study aimed to determine the validity of the digital photocolorimetric (PCM) method in matching the color of human teeth. First, two Vitapan Classical shade guides, each containing 16 shade guide teeth, were visually shade matched, and digital photographs of each three pair of shade guide teeth were taken in a color matching booth. Secondly, visual shade matching of the upper central incisors of 48 subjects was performed by two prosthodontists independently in a chair, using the Vitapan Classical shade guide. The three closest shade guide teeth were visually selected and ranked in order of preference, for which digital photographs were taken under ceiling daylight-corrected fluorescent lighting. All digital images were analyzed on a computer screen using software to calculate the color difference between the reference tooth and other teeth in the same digital image. The percent color matching for the shade guide teeth and human teeth was 88% and 75%, respectively. There was no statistically significant difference in matching the tooth color between the shade guide teeth and human teeth. The digital PCM method is valid for the range of human teeth based on the Vitapan Classical shade guide. This method enhances communication with the laboratory personnel in matching the tooth color.
| S-EPMC5521749 | biostudies-literature
Project description:Computer Generated Holography achieves patterned illumination at the sample plane through phase modulation of the laser beam at the objective back aperture. This is obtained by using liquid crystal-based spatial light modulators (LC-SLMs), which modulate the spatial phase of the incident laser beam. A variety of algorithms is employed to calculate the phase modulation masks addressed to the LC-SLM. These algorithms range from simple gratings-and-lenses to generate multiple diffraction-limited spots, to iterative Fourier-transform algorithms capable of generating arbitrary illumination shapes perfectly tailored on the base of the target contour. Applications for holographic light patterning include multi-trap optical tweezers, patterned voltage imaging and optical control of neuronal excitation using uncaging or optogenetics. These past implementations of computer generated holography used binary input profile to generate binary light distribution at the sample plane. Here we demonstrate that using graded input sources, enables generating intensity graded light patterns and extend the range of application of holographic light illumination. At first, we use intensity-graded holograms to compensate for LC-SLM position dependent diffraction efficiency or sample fluorescence inhomogeneity. Finally we show that intensity-graded holography can be used to equalize photo evoked currents from cells expressing different levels of chanelrhodopsin2 (ChR2), one of the most commonly used optogenetics light gated channels, taking into account the non-linear dependence of channel opening on incident light.
| S-EPMC5065964 | biostudies-literature
Project description:Imaging through opaque scattering media is critically important in applications ranging from biological and astronomical imaging to metrology and security. While the random process of scattering in turbid media produces scattered light that appears uninformative to the human eye, a wealth of information is contained in the signal and can be recovered using computational post-processing techniques. Recent studies have shown that statistical correlations present in the scattered light, known as 'memory effects', allow for diffraction-limited imaging through opaque media without detailed knowledge of (or access to) the source or scatterer. However, previous methods require that the object and/or scatterer be static during the measurement. We overcome this limitation by combining traditional memory effect imaging with coded-aperture-based computational imaging techniques, which enables us to realize for the first time single-shot video of arbitrary dynamic scenes through dynamic, opaque media. This has important implications for a wide range of real-world imaging scenarios.
| S-EPMC6128846 | biostudies-literature
Project description:Precise estimation of the number of follicles in ovaries is of key importance in the field of reproductive biology, both from a developmental point of view, where follicle numbers are determined at specific time points, as well as from a therapeutic perspective, determining the adverse effects of environmental toxins and cancer chemotherapeutics on the reproductive system. The two main factors affecting follicle number estimates are the sampling method and the variation in follicle numbers within animals of the same strain, due to biological variability. This study aims at assessing the effect of these two factors, when estimating ovarian follicle numbers of neonatal mice. We developed computer algorithms, which generate models of neonatal mouse ovaries (simulated ovaries), with characteristics derived from experimental measurements already available in the published literature. The simulated ovaries are used to reproduce in-silico counting experiments based on unbiased stereological techniques; the proposed approach provides the necessary number of ovaries and sampling frequency to be used in the experiments given a specific biological variability and a desirable degree of accuracy. The simulated ovary is a novel, versatile tool which can be used in the planning phase of experiments to estimate the expected number of animals and workload, ensuring appropriate statistical power of the resulting measurements. Moreover, the idea of the simulated ovary can be applied to other organs made up of large numbers of individual functional units.
| S-EPMC4374836 | biostudies-literature