Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Rapidly self-deoxygenating controlled radical polymerization in water via in situ disproportionation of Cu(i).

ABSTRACT: Rapidly self-deoxygenating Cu-RDRP in aqueous media is investigated. The disproportionation of Cu(i)/Me₆Tren in water towards Cu(ii) and highly reactive Cu(0) leads to O₂-free reaction environments within the first seconds of the reaction, even when the reaction takes place in the open-air. By leveraging this significantly fast O₂-reducing activity of the disproportionation reaction, a range of well-defined water-soluble polymers with narrow dispersity are attained in a few minutes or less. This methodology provides the ability to prepare block copolymers via sequential monomer addition with little evidence for chain termination over the lifetime of the polymerization and allows for the synthesis of star-shaped polymers with the use of multi-functional initiators. The mechanism of self-deoxygenation is elucidated with the use of various characterization tools, and the species that participate in the rapid oxygen consumption is identified and discussed in detail.

SUBMITTER: Liarou E

PROVIDER: S-EPMC8159280 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Supported Cu<sup>0</sup> nanoparticles catalyst for controlled radical polymerization reaction and block-copolymer synthesis.

Project description:The synthesis of Cu0 nanoparticles on different supports and their activity in controlled living radical polymerization processes is presented. The type of support influences the final size of the copper nanoparticles as well as their adhesion to the support. These aspects have a direct influence on the characteristics of the polymers obtained. The best results were obtained for SiO2 particles, which afforded a good molecular weight distribution (Mw/Mn?=?1.25). The activity, recovery and recycling of the catalyst was explored for ultrafast polymerization reaction of butyl acrylate. Further, the terminal bromine reactivity was used for the synthesis of a block poly(n butyl acrylate-block-styrene). The influence of ligand type on the control of the reaction was studied. Also, a straightforward polymerization procedure without any ligand afforded a polydispersity value of 1.38.

| S-EPMC5583343 | biostudies-literature

Fabrication of Water-Resistant Nacre-like Polymer/Clay Nanocomposites via in Situ Polymerization.

Project description:Fabrication and characterization of water-resistant nacre-like polymer/clay nanocomposites, in which clay platelets and hydrophobic polymer chains are alternately stacked in parallel, are reported. Hydrophilic clay was converted by an ion-exchange reaction with a methacrylate monomer having a long alkyl chain and a quaternary ammonium salt group at the end. The subsequent in situ polymerization bound the neighboring clay surfaces, leading to the preferential orientation of the clay platelets owing to their high aspect ratio. The composites maintained excellent mechanical properties even after being immersed in water for more than a day. Strong shape stability was observed in water as well as in various organic solvents.

| S-EPMC6645041 | biostudies-literature

Self-organized and cu-coordinated surface linear polymerization.

Project description:We demonstrate a controllable surface-coordinated linear polymerization of long-chain poly(phenylacetylenyl)s that are self-organized into a "circuit-board" pattern on a Cu(100) surface. Scanning tunneling microscopy/spectroscopy (STM/S) corroborated by ab initio calculations, reveals the atomistic details of the molecular structure, and provides a clear signature of electronic and vibrational properties of the poly(phenylacetylene)s chains. Notably, the polymerization reaction is confined epitaxially to the copper lattice, despite a large strain along the polymerized chain that subsequently renders it metallic. Polymerization and depolymerization reactions can be controlled locally at the nanoscale by using a charged metal tip. This control demonstrates the possibility of precisely accessing and controlling conjugated chain-growth polymerization at low temperature. This finding may lead to the bottom-up design and realization of sophisticated architectures for molecular nano-devices.

| S-EPMC3696919 | biostudies-literature

Biomimetic temporal self-assembly via fuel-driven controlled supramolecular polymerization.

Project description:Temporal control of supramolecular assemblies to modulate the structural and transient characteristics of synthetic nanostructures is an active field of research within supramolecular chemistry. Molecular designs to attain temporal control have often taken inspiration from biological assemblies. One such assembly in Nature which has been studied extensively, for its well-defined structure and programmable self-assembly, is the ATP-driven seeded self-assembly of actin. Here we show, in a synthetic manifestation of actin self-assembly, an ATP-selective and ATP-fuelled, controlled supramolecular polymerization of a phosphate receptor functionalised monomer. It undergoes fuel-driven nucleation and seeded growth that provide length control and narrow dispersity of the resultant assemblies. Furthermore, coupling via ATP-hydrolysing enzymes yielded its transient characteristics. These results will usher investigations into synthetic analogues of important biological self-assembly motifs and will prove to be a significant advancement toward biomimetic temporally programmed materials.

| S-EPMC5878180 | biostudies-literature

Protein-polymer bioconjugates via a versatile oxygen tolerant photoinduced controlled radical polymerization approach.

Project description:The immense application potential of amphiphilic protein-polymer conjugates remains largely unexplored, as established "grafting from" synthetic protocols involve time-consuming, harsh and disruptive deoxygenation methods, while "grafting to" approaches result in low yields. Here we report an oxygen tolerant, photoinduced CRP approach which readily affords quantitative yields of protein-polymer conjugates within 2 h, avoiding damage to the secondary structure of the protein and providing easily accessible means to produce biomacromolecular assemblies. Importantly, our methodology is compatible with multiple proteins (e.g. BSA, HSA, GOx, beta-galactosidase) and monomer classes including acrylates, methacrylates, styrenics and acrylamides. The polymerizations are conveniently conducted in plastic syringes and in the absence of any additives or external deoxygenation procedures using low-organic content media and ppm levels of copper. The robustness of the protocol is further exemplified by its implementation under UV, blue light or even sunlight irradiation as well as in buffer, nanopure, tap or even sea water.

| S-EPMC7083936 | biostudies-literature

Synthesis of Polymer Grafted Magnetite Nanoparticle with the Highest Grafting Density via Controlled Radical Polymerization.

Project description:The surface-initiated ATRP of benzyl methacrylate, methyl methacrylate, and styrene from magnetite nanoparticle is investigated, without the use of sacrificial (free) initiator in solution. It is observed that the grafting density obtained is related to the polymerization kinetics, being higher for faster polymerizing monomer. The grafting density was found to be nearly 2 chains/nm2for the rapidly polymerizing benzyl methacrylate. In contrast, for the less rapidly polymerizing styrene, the grafting density was found to be nearly 0.7 chain/nm2. It is hypothesized that this could be due to the relative rates of surface-initiated polymerization versus conformational mobility of polymer chains anchored by one end to the surface. An amphiphilic diblock polymer based on 2-hydroxylethyl methacrylate is synthesized from the polystyrene monolayer. The homopolymer and block copolymer grafted MNs form stable dispersions in various solvents. In order to evaluate molecular weight of the polymer that was grafted on to the surface of the nanoparticles, it was degrafted suitably and subjected to gel permeation chromatography analysis. Thermogravimetric analysis, transmission electron microscopy, and Fourier transform infrared spectroscopy were used to confirm the grafting reaction.

| S-EPMC2894347 | biostudies-literature

Photochemical control of DNA structure through radical disproportionation.

Project description:Photolysis of an aryl sulfide-containing 5,6-dihydropyrimidine (1) at 350 nm produces high yields of thymidine and products resulting from trapping of a 5,6-dihydrothymidin-5-yl radical by O₂ or thiols. Thymidine is believed to result from disproportionation of the radical pair originally generated from C--S bond homolysis of 1 on the microsecond timescale, which is significantly shorter than other photochemical transformations of modified nucleotides into their native forms. Duplex DNA containing 1 is destabilized, presumably due to disruption of π-stacking. Incorporation of 1 within the binding site of the restriction endonuclease EcoRV provides a photochemical switch for turning on the enzyme's activity. In contrast, 1 is a substrate for endonuclease VIII and serves as a photochemical off switch for this base excision repair enzyme. Modification 1 also modulates the activity of the 10-23 DNAzyme, despite its incorporation into a nonduplex region. Overall, dihydropyrimidine 1 shows promise as a tool to provide spatiotemporal control over DNA structure on the miscrosecond timescale.

| S-EPMC3807129 | biostudies-literature

Chirality-controlled polymerization-induced self-assembly.

Project description:Recent studies have shown that biodegradable nanoparticles can be efficiently prepared with polymerization of N-carboxyanhydrides-induced self-assembly (NCA-PISA). However, thus far, the effect of chiral monomer ratio on such NCA-PISA formulations and the resulting nanoparticles has not yet been fully explored. Herein, we show, for the first time, that the morphology, secondary structure, and biodegradation rate of PISA nanoparticles can be controlled by altering the chiral ratio of the core-forming monomers. This chirality-controlled PISA (CC-PISA) method allowed the preparation of nanoparticles that are more adjustable and applicable for future biomedical applications. Additionally, the complex secondary peptide structure (ratio of α-helix to β-sheet) and π-π stacking affect the polymer self-assembly process. More specifically, a PEG45 macro-initiator was chain-extended with l- and d-phenylalanine (l- and d-Phe-NCA) in various molar ratios in dry THF at 15 wt%. This ring-opening polymerization (ROP) allowed the preparation of homo- and hetero-chiral Phe-peptide block copolymers that self-assembled in situ into nanoparticles. For homo-chiral formulations, polymers self-assembled into vesicles once a sufficiently high phenylalanine degree of polymerization (DP) was obtained. Hetero-chiral formulations formed larger nanoparticles with various morphologies and, much to our surprise, using an equal enantiomer ratio inhibited PISA and led to a polymer solution instead. Finally, it was shown that the enzymatic biodegradation rate of such PISA particles is greatly affected by the polymer chirality. This PISA approach could be of great value to fabricate nanoparticles that exploit chirality in disease treatment.

| S-EPMC9728572 | biostudies-literature

End-group-functionalized poly(N,N-diethylacrylamide) via free-radical chain transfer polymerization: Influence of sulfur oxidation and cyclodextrin on self-organization and cloud points in water.

Project description:In this work we report the synthesis of thermo-, oxidation- and cyclodextrin- (CD) responsive end-group-functionalized polymers, based on N,N-diethylacrylamide (DEAAm). In a classical free-radical chain transfer polymerization, using thiol-functionalized 4-alkylphenols, namely 3-(4-(1,1-dimethylethan-1-yl)phenoxy)propane-1-thiol and 3-(4-(2,4,4-trimethylpentan-2-yl)phenoxy)propane-1-thiol, poly(N,N-diethylacrylamide) (PDEAAm) with well-defined hydrophobic end-groups is obtained. These end-group-functionalized polymers show different cloud point values, depending on the degree of polymerization and the presence of randomly methylated ?-cyclodextrin (RAMEB-CD). Additionally, the influence of the oxidation of the incorporated thioether linkages on the cloud point is investigated. The resulting hydrophilic sulfoxides show higher cloud point values for the lower critical solution temperature (LCST). A high degree of functionalization is supported by (1)H NMR-, SEC-, FTIR- and MALDI-TOF measurements.

| S-EPMC3999829 | biostudies-literature

Shewanella oneidensis as a living electrode for controlled radical polymerization.

Project description:Metabolic engineering has facilitated the production of pharmaceuticals, fuels, and soft materials but is generally limited to optimizing well-defined metabolic pathways. We hypothesized that the reaction space available to metabolic engineering could be expanded by coupling extracellular electron transfer to the performance of an exogenous redox-active metal catalyst. Here we demonstrate that the electroactive bacterium Shewanella oneidensis can control the activity of a copper catalyst in atom-transfer radical polymerization (ATRP) via extracellular electron transfer. Using S. oneidensis, we achieved precise control over the molecular weight and polydispersity of a bioorthogonal polymer while similar organisms, such as Escherichia coli, showed no significant activity. We found that catalyst performance was a strong function of bacterial metabolism and specific electron transport proteins, both of which offer potential biological targets for future applications. Overall, our results suggest that manipulating extracellular electron transport pathways may be a general strategy for incorporating organometallic catalysis into the repertoire of metabolically controlled transformations.

| S-EPMC5939106 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data