Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Glass Fiber-Supported Hybrid Monolithic Spin Tip for Enrichment of Phosphopeptides from Urinary Extracellular Vesicles.

ABSTRACT: Extracellular vesicles (EVs) are attracting increasing interest with their intriguing role in intercellular communications. Protein phosphorylation in EVs is of great importance for understanding intercellular signaling processes. However, the study of EV phosphoproteomics is impeded by their relatively low amount in limited clinical sample volumes, and it is necessary to have a sensitive and efficient enrichment method for EV phosphopeptides. Herein, a novel Ti(IV)-functionalized and glass fiber-supported hybrid monolithic spin tip, termed PhosTip, was prepared for enriching phosphopeptides from urinary EVs. Glass fiber as the stationary phase positions the hybrid monolith in a standard pipet tip and prevents the monolith from distortion during experiments. The preparation procedure for the new PhosTip is simple and time-saving. The hybrid monolithic PhosTip provides excellent enrichment efficiency of low-abundance phosphopeptides from cell digests and urinary EVs with minimum contamination and sample loss. Using the PhosTip, we demonstrate that 5373 and 336 unique phosphopeptides were identified from 100 and 1 μg of cell lysates, while 3919 and 217 unique phosphopeptides were successfully identified from 10 and 1 mL of urinary samples, respectively. The PhosTip was finally applied to enrich phosphopeptides in urine EVs from prostate cancer patients and healthy controls and quantify 118 up-regulated proteins with phosphosites in prostate cancer samples. These results demonstrated that the PhosTip could be a simple and convenient tool for enriching phosphopeptides from clinical samples and for broader applications in biomarker discovery.

SUBMITTER: Zhang H

PROVIDER: S-EPMC8281360 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

PhosTip for Enrichment of Phosphopeptides from Urinary Extracellular Vesicles

Project description:Extracellular vesicles (EVs) are attracting increasing interest with their intrigue role in intercellular communications. Protein phosphorylation in EVs is of great importance for understanding intercellular signaling processes. However, the study of EV phosphoproteomics is impeded by their relatively low amount in limited clinical samples and it is necessary to have a sensitive and efficient enrichment method for EV phosphopeptides. Herein, a novel Ti4+-functionalized and glass-fiber supported hybrid monolithic spin tip, we named PhosTip, was prepared for enriching phosphopeptides from urinary EVs.

2022-02-15 | PXD020861 | Pride

A Spin-Tip Enrichment Strategy for the Simultaneous Analysis of N-Glycopeptides and Phosphopeptides from Human Pancreatic Tissues

Project description:Post-translational modifications (PTMs) change protein structures and functions. Methods for the simultaneous enrichment of multiple PTM types can maximize coverage in analyses. We present a protocol using dual-functional Ti(IV)-immobilized metal affinity chromatography followed by mass spectrometry for the simultaneous enrichment and analysis of protein N-glycosylation and phosphorylation in pancreas tissues.

2022-08-12 | PXD033065 | Pride

Probabilistic enrichment of phosphopeptides by their mass defect.

Project description:The mass defect, that is, the difference between the nominal and actual monoisotopic masses, of a phosphorus in a phosphate group is greater than for most other atoms present in proteins. When the mass defects of tryptic peptides derived from the human proteome are plotted against their masses, phosphopeptides tend to fall off the regression line. By calculating the masses of all potential tryptic peptides from the human proteome, we show that regions of higher phosphorylation probability exist on such a plot. We developed a transformation function to estimate the mass defect of a peptide from its monoisotopic mass and empirically defined a simple formula for a user-selectable discriminant line that categorizes a peptide mass according to its probability of being phosphorylated. Our method performs similarly well on phosphopeptides derived from a database of experimentally validated phosphoproteins. The method is relatively insensitive to mass measurement error of up to 20 ppm. The approach can be used with a tandem mass spectrometer in real time to rapidly select and rank order the possible phosphopeptides from a mixture of unmodified peptides for subsequent phosphorylation site mapping and peptide sequence analysis.

| S-EPMC2547851 | biostudies-literature

Modification of Luffa Sponge for Enrichment of Phosphopeptides.

Project description:The enrichment technique is crucial to the comprehensive analysis of protein phosphorylation. In this work, a facile, green and efficient synthetic method was set up for quaternization of luffa sponge. The resultant luffa sponge showed strong anion-exchange characteristics and a high adsorption ability for phosphate ions. Along with the unique physical properties, e.g., tenacity and porous texture, quaternized luffa sponge was demonstrated to be a well-suited solid-phase extraction (SPE) material. The quaternized luffa sponge-based SPE method was simple, cost-effective and convenient in operation, and was successfully applied to the capture of phosphopeptides from protein digests. The enrichment approach exhibited exceptionally high selectivity, sensitivity and strong anti-interference ability. Four phosphopeptides were still detected by using the digest mixture of ?-casein and bovine serum albumin with a molar ratio of 1:100. 21 phosphopeptides were identified from the tryptic digest of non-fat milk.

| S-EPMC6982136 | biostudies-literature

Printed Circuit Board-Derived Glass Fiber-Epoxy Resin-Supported Mo-Cu Bimetallic Catalyst for Glucose Synthesis.

Project description:A glass fiber-epoxy resin (GFER) framework derived from mixed waste printed circuit boards (MWPCBs) was utilized to prepare a cost-effective, reusable Mo-Cu bimetallic Bronsted-Lewis solid acid catalyst through wet-impregnation under near-infrared radiation (NIRR) activation. The efficacy of the novel Mo-Cu catalyst was assessed in the synthesis of glucose through hydrolysis of jute (Corchorus olitorius) fiber, and the process parameters were optimized (Mo precursor loading: 1.0 wt %, catalyst concentration: 5 wt %, hydrolysis temperature: 80 °C, and hydrolysis time: 10 min) through Taguchi orthogonal design. The GFER support and the prepared catalysts were characterized through thermogravimetric, X-ray diffraction (XRD), Fourier-transform infrared (FTIR), Brunauer-Emmett-Teller (BET)-density functional theory, and TPD analyses. The optimal Mo-Cu catalyst and the GFER support possessed 45.377 and 7.049 m2/g BET area, 0.04408 and 0.02317 cc/g pore volume, 1.9334 and 0.7482 nm modal pore size, and surface acidity of 0.48 and 0.40 mmol NH3/g catalyst, respectively. X-ray photoelectron spectroscopy bands confirmed the coexistence of Mo6+ and Cu2+ species; XRD and FTIR analyses indicated the presence of MoO3 and CuO crystalline phases in all prepared catalysts. The optimal catalyst prepared through NIRR (wavelength 0.75-1.4 ?m)-activated hydrothermal treatment resulted in a significantly greater glucose yield (75.84 mol %) than that achieved (53.64 mol %) using a conventionally prepared catalyst. Thus, an energy-efficient application of NIRR (100 W) could significantly improve catalytic properties over conventional hydrothermal treatment (500 W). The present investigation provides an innovative application of MWPCB-derived GFER as a promising cost-effective support for the preparation of highly efficient inexpensive solid catalysts for sustainable synthesis of glucose from low-cost waste jute fiber.

| S-EPMC6643727 | biostudies-literature

Residual urinary extracellular vesicles in ultracentrifugation supernatants after hydrostatic filtration dialysis enrichment.

Project description:Urinary extracellular vesicles (UEVs) appear an ideal source of biomarkers for kidney and urogenital diseases. The majority of protocols designed for their isolation are based on differential centrifugation steps. However, little is still known of the type and amount of vesicles left in the supernatant. Here we used an isolation protocol for UEVs which uses hydrostatic filtration dialysis as first pre-enrichment step, followed by differential centrifugation. Transmission electron microscopy (TEM), mass spectrometry (MS), western blot, ELISA assays and tuneable resistive pulse sensing (TRPS) were used to characterise and quantify UEVs in the ultracentrifugation supernatant. TEM showed the presence of a variety of small size vesicles in the supernatant while protein identification by MS matched accurately with the protein list available in Vesiclepedia. Screening and relative quantification for specific vesicle markers showed that the supernatant was preferentially positive for CD9 and TSG101. ELISA tests for quantification of exosome revealed that 14%, was left in the supernatant with a particle diameter of 110 nm and concentration of 1.54 × 1010/ml. Here we show a comprehensive characterisation of exosomes and other small size urinary vesicles which the conventional differential centrifugation protocol may lose.

| S-EPMC5328348 | biostudies-literature

Photocatalytic hydrogen generation of monolithic porous titanium oxide-based glass-ceramics.

Project description:A large relative surface area is crucial for high catalytic activity. Monolithic catalysts are important catalytic materials because of minimal self-degradation. Regarding large surface area catalysts, the glass-ceramics (GCs) with high formability, obtained by heat-treatment of the precursor glass, are plausible candidates. This study examines the photocatalytic behaviour of porous GCs obtained after acid leaching of MgO-TiO2-P2O5 GCs. After heat-treatment, anatase TiO2 was precipitated along with other phases. The diffraction intensity ratio between anatase and other phases was the maximum for a heat-treatment temperature of 900 °C. After acid leaching of the GCs, the relative surface area decreased with increasing TiO2 fraction; the surface area was also affected by the sample morphology. H2 generation was observed from porous GCs, while GCs without etching exhibited approximately zero activity. Thus, it was demonstrated that high surface area and prevention of the reduction reaction to Ti(III) are important for tailoring monolithic photocatalytic materials.

| S-EPMC7363924 | biostudies-literature

Thermodynamic glass transition in a spin glass without time-reversal symmetry.

Project description:Spin glasses are a longstanding model for the sluggish dynamics that appear at the glass transition. However, spin glasses differ from structural glasses in a crucial feature: they enjoy a time reversal symmetry. This symmetry can be broken by applying an external magnetic field, but embarrassingly little is known about the critical behavior of a spin glass in a field. In this context, the space dimension is crucial. Simulations are easier to interpret in a large number of dimensions, but one must work below the upper critical dimension (i.e., in d < 6) in order for results to have relevance for experiments. Here we show conclusive evidence for the presence of a phase transition in a four-dimensional spin glass in a field. Two ingredients were crucial for this achievement: massive numerical simulations were carried out on the Janus special-purpose computer, and a new and powerful finite-size scaling method.

| S-EPMC3340103 | biostudies-literature

Biofilm Detection by a Fiber-Tip Ball Resonator Optical Fiber Sensor.

Project description:Bacterial biofilms are one of the most important challenges that modern medicine faces due to the difficulties of diagnosis, antibiotic resistance, and protective mechanisms against aggressive environments. For these reasons, methods that ensure the inexpensive and rapid or real-time detection of biofilm formation on medical devices are needed. This study examines the possibilities of using optical- and fiber-based biosensors to detect and analyze early bacterial biofilms. In this study, the biofilm-forming model organism Pseudomonas aeruginosa was inoculated on the surface of the optical sensor and allowed to attach for 2 h. The biosensors were made by a fiber-tip ball resonator, fabricated through a CO2 laser splicer on a single-mode fiber, forming a weak reflective spectrum. An optical backscatter reflectometer was used to measure the refractive index detected by the sensors during different growth periods. The early biofilm concentration was determined by crystal violet (CV) binding assay; however, such a concentration was lower than the detection limit of this assay. This work presents a new approach of biofilm sensing in the early attachment stage with a low limit of detection up to 10-4 RIU (refractive index units) or 35 ± 20 × 103 CFU/mL (colony formed units).

| S-EPMC9313161 | biostudies-literature

Nanosphere lithography for optical fiber tip nanoprobes.

Project description:This paper reports a simple and economical method for the fabrication of nanopatterned optical fiber nanotips. The proposed patterning approach relies on the use of the nanosphere lithography of the optical fiber end facet. Polystyrene (PS) nanospheres are initially self-assembled in a hexagonal array on the surface of water. The created pattern is then transferred onto an optical fiber tip (OFT). The PS monolayer colloidal crystal on the OFT is the basic building block that is used to obtain different periodic structures by applying further treatment to the fiber, such as metal coating, nanosphere size reduction and sphere removal. Ordered dielectric and metallo-dielectric sphere arrays, metallic nanoisland arrays and hole-patterned metallic films with feature sizes down to the submicron scale are achievable using this approach. Furthermore, the sizes and shapes of these periodic structures can be tailored by altering the fabrication conditions. The results indicate that the proposed self-assembly approach is a valuable route for the development of highly repeatable metallo-dielectric periodic patterns on OFTs with a high degree of order and low fabrication cost. The method can be easily extended to simultaneously produce multiple fibers, opening a new route to the development of fiber-optic nanoprobes. Finally, we demonstrate the effective application of the patterned OFTs as surface-enhanced Raman spectroscopy nanoprobes.

| S-EPMC6062194 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data