Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Polyvinyl alcohol-montmorillonite composites for water purification: Analysis of clay mineral cation exchange and composite particle synthesis.

ABSTRACT: Municipal and residential water purification rely heavily on activated carbon (AC), but regeneration of AC is costly and cannot be performed at the point-of-use. Clay minerals (CMs) comprise a class of naturally abundant materials with known capacities for analyte adsorbance. However, the gel-forming properties of CMs in aqueous suspension pose problems for these materials being used in water-purification. In this study, we have taken three main steps to optimize the use of CMs in these applications. First, we produced several variants of montmorillonite CMs to evaluate the effect of interstitial cation hydrophobicity on the ability of the CM to uptake chargecarrying organic pollutants. These variants include CMs with the following cations: sodium, hexyl(triphenyl) phosphonium, hexyadecyl(triphenyl)phosphonium, and hexyl(tributyl)phosphonium. Second, we synthesized polymer-clay mineral composite films composed of polyvinyl alcohol (PVA), crosslinked in the presence of a CM variant. These films were evaluated for their ability to uptake malachite green (MG). Finally, we developed a one-pot synthetic method for the generation of polymer-clay particles for use in a continuous column process. We synthesized polymer-clay mineral particles using the highest performing CM (based on the film experiments) and evaluated the equilibrium capacity and kinetics of MG uptake from solution.

SUBMITTER: Brown K

PROVIDER: S-EPMC8297557 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Nanocomposite Polymer Electrolytes of Sodium Alginate and Montmorillonite Clay.

Project description:Nanocomposite polymer electrolytes (NPEs) were synthesized using sodium alginate (Alg) and either sodium (SCa-3-Na+)- or lithium (SCa-3-Li+)-modified montmorillonite clays. The samples were characterized by structural, optical, and electrical properties. SCa-3-Na+ and SCa-3-Li+ clays' X-ray structural analyses revealed peaks at 2θ = 7.2° and 6.7° that corresponded to the interlamellar distances of 12.3 and 12.8 Å, respectively. Alg-based NPEs X-ray diffractograms showed exfoliated structures for samples with low clay percentages. The increase of clay content promoted the formation of intercalated structures. Electrochemical Impedance Spectroscopy revealed that Alg-based NPEs with 5 wt% of SCa-3-Na+ clay presented the highest conductivity of 1.96 × 10-2 S/cm2, and Alg with 10 wt% of SCa-3-Li+ showed conductivity of 1.30 × 10-2 S/cm2, both measured at 70 °C. From UV-Vis spectroscopy, it was possible to infer that increasing concentration of clay promoted a decrease of the samples' transmittance and, consequently, an increase of their reflectance.

| S-EPMC8068159 | biostudies-literature

Cd(II) Sorption on Montmorillonite-Humic acid-Bacteria Composites.

Project description:Soil components (e.g., clays, bacteria and humic substances) are known to produce mineral-organic composites in natural systems. Herein, batch sorption isotherms, isothermal titration calorimetry (ITC), and Cd K-edge EXAFS spectroscopy were applied to investigate the binding characteristics of Cd on montmorillonite(Mont)-humic acid(HA)-bacteria composites. Additive sorption and non-additive Cd(II) sorption behaviour is observed for the binary Mont-bacteria and ternary Mont-HA-bacteria composite, respectively. Specifically, in the ternary composite, the coexistence of HA and bacteria inhibits Cd adsorption, suggesting a "blocking effect" between humic acid and bacterial cells. Large positive entropies (68.1~114.4 J/mol/K), and linear combination fitting of the EXAFS spectra for Cd adsorbed onto Mont-bacteria and Mont-HA-bacteria composites, demonstrate that Cd is mostly bound to bacterial surface functional groups by forming inner-sphere complexes. All our results together support the assertion that there is a degree of site masking in the ternary clay mineral-humic acid-bacteria composite. Because of this, in the ternary composite, Cd preferentially binds to the higher affinity components-i.e., the bacteria.

| S-EPMC4726142 | biostudies-literature

Montmorillonite clay-promoted, solvent-free cross-aldol condensations under focused microwave irradiation.

Project description:An environmentally benign, clean and general protocol was developed for the synthesis of aryl and heteroaryl trans-chalcones. This method involved solvent-free reaction conditions under microwave irradiation in the presence of a clay-based catalyst, and afforded the target compounds in good yields and short reaction times. Furthermore, the same conditions allowed the synthesis of symmetrical, diarylmethylene-?,?-unsaturated ketones from aromatic aldehydes and ketones.

| S-EPMC6271373 | biostudies-literature

Modeling the Optical Properties of a Polyvinyl Alcohol-Based Composite Using a Particle Swarm Optimized Support Vector Regression Algorithm.

Project description:We developed particle swarm optimization-based support vector regression (PSVR) and ordinary linear regression (OLR) models for estimating the refractive index (n) and energy gap (E) of a polyvinyl alcohol composite. The n-PSVR model, which can estimate the refractive index of a polyvinyl alcohol composite using the energy gap as a descriptor, performed better than the n-OLR model in terms of root mean square error (RMSE) and mean absolute error (MAE) metrics. The E-PSVR model, which can predict the energy gap of a polyvinyl alcohol composite using its refractive index descriptor, outperformed the E-OLR model, which uses similar descriptor based on several performance measuring metrics. The n-PSVR and E-PSVR models were used to investigate the influences of sodium-based dysprosium oxide and benzoxazinone derivatives on the energy gaps of a polyvinyl alcohol polymer composite. The results agreed well with the measured values. The models had low mean absolute percentage errors after validation with external data. The precision demonstrated by these predictive models will enhance the tailoring of the optical properties of polyvinyl alcohol composites for the desired applications. Costs and experimental difficulties will be reduced.

| S-EPMC8402182 | biostudies-literature

Bioinspired Self-Shaping Clay Composites for Sustainable Development.

Project description:Bioinspired self-shaping is an approach used to transform flat materials into unusual three-dimensional (3D) shapes by tailoring the internal architecture of the flat material. Bioinspiration and bioinspired materials have a high potential for fostering sustainable development, yet are often fashioned out of expensive and synthetic materials. In this work, we use bioinspiration to endow clay with self-shaping properties upon drying. The composites created are based on clay and starch, and the internal architecture is built using celery fibers. The viscosity, shrinkage, and bending of the architected composite monolayers are studied for several compositions by measuring penetration depth and using optical characterization methods. Bilayer structures inspired from plants are then processed using a simple hand layup process to achieve bending, twisting, and combinations of those after drying. By layering a mixture of 32 vol% clay, 25.8 vol% starch, and 42.2 vol% water with 40 wt% embedded aligned celery fibers, it is possible to obtain the desired shape change. The work presented here aims at providing a simple method for teaching the concept of bioinspiration, and for creating new materials using only clay and plant-based ingredients. Rejuvenating clay with endowed self-shaping properties could further expand its use. Furthermore, the materials, methods, and principles presented here are affordable, simple, largely applicable, and could be used for sustainable development in the domain of education as well as materials and structures.

| S-EPMC8788514 | biostudies-literature

Purification of Monoclonal Antibodies Using a Fiber Based Cation-Exchange Stationary Phase: Parameter Determination and Modeling.

Project description:Monoclonal antibodies (mAb) currently dominate the market for protein therapeutics. Because chromatography unit operations are critical for the purification of therapeutic proteins, the process integration of novel chromatographic stationary phases, driven by the demand for more economic process schemes, is a field of ongoing research. Within this study it was demonstrated that the description and prediction of mAb purification on a novel fiber based cation-exchange stationary phase can be achieved using a physico-chemical model. All relevant mass-transport phenomena during a bind and elute chromatographic cycle, namely convection, axial dispersion, boundary layer mass-transfer, and the salt dependent binding behavior in the fiber bed were described. This work highlights the combination of model adaption, simulation, and experimental parameter determination through separate measurements, correlations, or geometric considerations, independent from the chromatographic cycle. The salt dependent binding behavior of a purified mAb was determined by the measurement of adsorption isotherms using batch adsorption experiments. Utilizing a combination of size exclusion and protein A chromatography as analytic techniques, this approach can be extended to a cell culture broth, describing the salt dependent binding behavior of multiple components. Model testing and validation was performed with experimental bind and elute cycles using purified mAb as well as a clarified cell culture broth. A comparison between model calculations and experimental data showed a good agreement. The influence of the model parameters is discussed in detail.

| S-EPMC5597267 | biostudies-literature

Mineral Acquisition from Clay by Budongo Forest Chimpanzees.

Project description:Chimpanzees of the Sonso community, Budongo Forest, Uganda were observed eating clay and drinking clay-water from waterholes. We show that clay, clay-rich water, and clay obtained with leaf sponges, provide a range of minerals in different concentrations. The presence of aluminium in the clay consumed indicates that it takes the form of kaolinite. We discuss the contribution of clay geophagy to the mineral intake of the Sonso chimpanzees and show that clay eaten using leaf sponges is particularly rich in minerals. We show that termite mound soil, also regularly consumed, is rich in minerals. We discuss the frequency of clay and termite soil geophagy in the context of the disappearance from Budongo Forest of a formerly rich source of minerals, the decaying pith of Raphia farinifera palms.

| S-EPMC4517816 | biostudies-literature

Enhanced Thermal Conductivity in Oriented Polyvinyl Alcohol/Graphene Oxide Composites.

Project description:Polymer composites have attracted increasing interest as thermal management materials for use in devices owing to their ease of processing and potential lower costs. However, most polymer composites have only modest thermal conductivities, even at high concentrations of additives, resulting in high costs and reduced mechanical properties, which limit their applications. To achieve high thermally conductive polymer materials with a low concentration of additives, anisotropic, solid-state drawn composite films were prepared using water-soluble polyvinyl alcohol (PVA) and dispersible graphene oxide (GO). A co-additive (sodium dodecyl benzenesulfonate) was used to improve both the dispersion of GO and consequently the thermal conductivity. The hydrogen bonding between GO and PVA and the simultaneous alignment of GO and PVA in drawn composite films contribute to an improved thermal conductivity (∼25 W m-1 K-1), which is higher than most reported polymer composites and an approximately 50-fold enhancement over isotropic PVA (0.3-0.5 W m-1 K-1). This work provides a new method for preparing water-processable, drawn polymer composite films with high thermal conductivity, which may be useful for thermal management applications.

| S-EPMC8289248 | biostudies-literature

Intervention trial with calcium montmorillonite clay in a south Texas population exposed to aflatoxin.

Project description:South Texas currently has the highest incidence of hepatocellular carcinoma (HCC) in the United States, a disease that disproportionately affects Latino populations in the region. Aflatoxin B1 (AFB1) is a potent liver carcinogen that has been shown to be present in a variety of foods in the United States, including corn and corn products. Importantly, it is a dietary risk factor contributing to a higher incidence of HCC in populations frequently consuming AFB1-contaminated diets. In a randomised double-blind placebo controlled trial, we evaluated the effects of a 3-month administration of ACCS100 (refined calcium montmorillonite clay) on serum AFB1-lysine adduct (AFB-Lys) level and serum biochemistry in 234 healthy men and women residing in Bexar and Medina counties, Texas. Participants recruited from 2012 to 2014 received either a placebo, 1.5 g or 3 g ACCS100 each day for 3 months, and no treatment during the fourth month. Adverse event rates were similar across treatment groups and no significant differences were observed for serum biochemistry and haematology parameters. Differences in levels of AFB-Lys at 1, 3 and 4 months were compared between placebo and active treatment groups. Although serum AFB-Lys levels were decreased by month 3 for both treatment groups, the low dose was the only treatment that was significant (p = 0.0005). In conclusion, the observed effect in the low-dose treatment group suggests that the use of ACCS100 may be a viable strategy to reduce dietary AFB1 bioavailability during aflatoxin outbreaks and potentially in populations chronically exposed to this carcinogen.

| S-EPMC5145309 | biostudies-literature

Electrical resistivity tomography (ERT) data for clay mineral mapping.

Project description:In order to identify potential zones for clay mineral (kaolinite) in Ranong province, Thailand, ten 2D ERT survey lines were deployed across potential site. The data were collected using the IRIS Syscal Pro Plus multi-electrode imaging system with internal switchbox and an array of 48 steel electrodes. The Dipole-Dipole configuration was utilized with electrode separations of 10 m. The Res2DInv software was used to process the data. Images for the resistivity survey are presented as 2D cross section of resistivity profile. The data were interpreted by comparing with geology of the area and based on the available lithological borehole information.

| S-EPMC7163305 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data