Dataset Information

Study on the Effect of Nanoparticle Used in Nano-Fluid Flooding on Droplet-Interface Electro-Coalescence.

ABSTRACT: Nano-fluid flooding is a new method capable of improving oil recovery; however, nanoparticles (NPs) significantly affect electric dehydration, which has rarely been investigated. The effect of silica (SiO₂) NPs on the droplet-interface coalescence was investigated using a high-speed digital camera under an electric field. The droplet experienced a fall, coalescence, and secondary droplet formation. The results revealed that the oil-water interfacial tension and water conductivity changed because of the SiO₂ NPs. The decrease of interfacial tension facilitated droplet deformation during the falling process. However, with the increase of particle concentration, the formed particle film inhibited the droplet deformation degree. Droplet and interface are connected by a liquid bridge during coalescence, and the NP concentration also resulted in the shape of this liquid bridge changing. The increase of NP concentration inhibited the horizontal contraction of the liquid bridge while promoting vertical collapse. As a result, it did not facilitate secondary droplet formation. Moreover, the droplet falling velocity decreased, while the rising velocity of the secondary droplet increased. Additionally, the inverse calculation of the force balance equation showed that the charge of the secondary droplet also increased. This is attributed to nanoparticle accumulation, which resulted in charge accumulation on the top of the droplet.

SUBMITTER: Yang D

PROVIDER: S-EPMC8308123 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Coalescence-induced condensate droplet jumping from superhydrophobic surfaces can be exploited in condensation heat-transfer enhancement, imparting self-cleaning behavior to surfaces, anti-icing coatings, and other industrial uses. An intriguing application would exploit this phenomenon to achieve thermal rectification using a sealed vapor chamber with opposing superhydrophilic and superhydrophobic surfaces. During forward operation, continuous evaporation occurs from the heated superhydrophilic evaporator surface; self-propelled jumping returns the condensate droplets from the cooler superhydrophobic surface to the evaporator, allowing passive recirculation of the working fluid without a reliance on gravity or capillary wicking for fluid return. In reverse operation, when the superhydrophobic surface is heated, the absence of a mechanism for fluid return from the cooler superhydrophilic side to the evaporator restricts heat transport across the (low conductivity) vapor gap. The effectiveness of this jumping-droplet thermal diode can be enhanced by maximizing the distance between the opposing superhydrophobic and superhydrophilic surfaces. It is, therefore, important to investigate the height to which the condensate droplets jump from the superhydrophobic surfaces such that replenishment of liquid to the superhydrophilic surface is maintained. In this study, we systematically investigate the height to which the condensate droplets jump from the hierarchical superhydrophobic surfaces having truncated microcones coated with nanostructures. The condensate droplet jumping height increases with a decrease in microcone pitch. A general theoretical model that accounts for surface adhesion, line tension, and initial wetting states of multiple coalescing droplets of different radii is used to predict and explain the experimentally observed trend of droplet jumping height with surface roughness. The insights provided regarding the effect of surface topography on droplet jumping height are critical to the design of high-performance thermal diode devices.

Dataset Information

Study on the Effect of Nanoparticle Used in Nano-Fluid Flooding on Droplet-Interface Electro-Coalescence.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets