Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Radical Photopolymerization Using 1,4-Dihydropyrrolo[3,2-b]pyrrole Derivatives Prepared via One-Pot Synthesis.

ABSTRACT: Radical photopolymerization has attracted significant attention for manufacturing products with complicated structures. Herein, the synthesized 1,4-bis(4-bromophenyl)-2,5-bis(4-nitrophenyl)-1,4-dihydropyrrole[3,2-b]pyrrole (PyBN) is found to show varying photoactivity upon irradiation at different wavelengths. PyBN affords two main absorption bands, and its maximum absorption peak is at 462 nm, attributing to its strong intramolecular charge transfer property based on the donor-acceptor structure. It efficiently photoinitiates the radical photopolymerization of different (meth)acrylate materials under 365 and 395 nm LED irradiation. The highest double bond conversion of 99.86% is achieved for these materials. Under 470 nm LED, PyBN does not show molecular structure change from photolysis results as a result of intramolecular charge transfer. Therefore, PyBN shows wavelength-selective photoactivity with potential application in dual-wavelength volumetric additive manufacturing. A unique solid product is successfully fabricated using a 365 nm LED with co-irradiation of a 470 nm LED. Additionally, PyBN incorporating camphorquinone (CQ) as a two-component visible light photoinitiator system is investigated under 470 nm LED irradiation. As PyBN has a charge transfer activity at 470 nm, the combination with CQ exhibits a good synergistic interaction. Besides nitro-based PyBN, a methyl-based PyBC was prepared as a reference compound.

SUBMITTER: Xu Y

PROVIDER: S-EPMC8374902 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Mechanoresponsive Material of AIE-Active 1,4-Dihydropyrrolo[3,2-b]pyrrole Luminophores Bearing Tetraphenylethylene Group with Rewritable Data Storage.

Project description:A new tetraphenylethylene (TPE) functionalized 1,4-dihydropyrrolo[3,2-b]pyrrole derivative (APPTPECN) was synthesized with obvious aggregation-induced emission (AIE) active by simple synthetic method. APPTPECN exhibited reversible mechanofluorochromic (MFC) behavior. The powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) investigations exhibited that the MFC nature is originated through a conversion from the microcrystalline to amorphous phase under the stimulus of external force. The results obtained would be of major help in understanding the MFC mechanism and designing new MFC materials. Compound APPTPECN has the potential possibility to employ in rewritable data storage and is of assistance in the rational design of smart luminescent materials.

| S-EPMC6321101 | biostudies-literature

2,5-bis(4-alkoxycarbonylphenyl)-1,4-diaryl-1,4-dihydropyrrolo[3,2-b]pyrrole (AAPP) AIEgens: tunable RIR and TICT characteristics and their multifunctional applications.

Project description:Aggregation-induced emission luminogens (AIEgens) have attracted extensive interest for their outstanding luminescence properties in the aggregated state and even in the solid state. In this work, we developed a series of novel AIEgens based on 2,5-bis(4-alkoxycarbonylphenyl)-1,4-diaryl-1,4-dihydropyrrolo[3,2-b]pyrrole (AAPP). The AIEgens can be facilely synthesized through a single-step reaction under mild conditions with satisfactory yields. Interestingly, AAPP was found to have multiple luminous mechanisms that result in variable fluorescence properties. The propeller-like structure of AAPP enables a restricted intramolecular rotation (RIR) process which significantly enhances its fluorescence in the aggregated state (i.e. AIE fluorescence). In addition, there is a donor-acceptor interaction between the heterocycle center and the alkoxycarbonyl units in AAPP which allows a typical twisted intramolecular charge transfer (TICT) process in the dispersed state, resulting in strong fluorescence emissions in non-polar or low-polarity solvents but fluorescence quenching in high-polarity solvents. Due to the tunable RIR and TICT processes and the multiple fluorescence, AAPP compounds exhibit multifunctional applications: (1) as a reversible fluorescent thermometer, AAPP exhibited excellent fatigue resistance. There was a good linear relationship between its fluorescence intensity and temperature from 10 °C to 60 °C. (2) The desethyl AAPP derivative (CAPP) was successfully applied in the detection of Cd(ii) in aqueous solution at neutral pH, and showed a 500-fold fluorescence "turn-on" response to Cd(ii) with good selectivity.

| S-EPMC5633666 | biostudies-literature

Relating Design and Optoelectronic Properties of 1,4-Dihydropyrrolo[3,2-b]pyrroles Bearing Biphenyl Substituents.

Project description:Understanding the influence of peripheral functionality on optoelectronic properties of conjugated materials is an important task for the continued development of chromophores for myriad applications. Here, π-extended 1,4-dihydropyrrolo[3,2-b]pyrrole (DHPP) chromophores with varying electron-donating or electron-withdrawing capabilities were synthesized via Suzuki cross-coupling reactions, and the influence of functionality on optoelectronic properties was elucidated. First, chromophores display distinct differences in the UV-vis absorbance spectra measured via UV-vis absorbance spectroscopy in addition to changes in the onset of oxidation measured with cyclic voltammetry and differential pulse voltammetry. Solution oxidation studies found that variations in the electron-donating and -withdrawing capabilities result in different absorbance profiles of the radical cations that correspond to quantifiably different colors. In addition to fundamental insights into the molecular design of DHPP chromophores and their optoelectronic properties, two chromophores display high-contrast electrochromism, which makes them potentially compelling in electronic devices. Overall, this study represents the ability to fine-tune the optoelectronic properties of DHPP chromophores in their neutral and oxidized states and expands the understanding of structure-property relationships that will guide the continued development of DHPP-based materials.

| S-EPMC10461294 | biostudies-literature

Three differently coloured polymorphs of 3,6-bis(4-chlorophenyl)-2,5-dipropyl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione.

Project description:In this paper, the conformational polymorphism of a chlorinated diketopyrrolopyrrole (DPP) dye having flexible substituents in a non-hydrogen-bonding system is reported. The propyl-substituted DPP derivative (PR3C) has three polymorphic forms, each showing a different colour (red, orange and yellow). All polymorphs could be obtained concomitantly under various crystallization conditions. The results of the crystal structure analysis indicate that PR3C adopts different conformations in each polymorph. The packing effect caused by the difference in the arrangement of neighbouring molecules was found to play an important role in the occurrence of the observed polymorphism. The thermodynamic stability relationship between the three polymorphs was identified by thermal analysis and indicates that the yellow polymorph is the thermally stable form. The results indicate that the yellow form and orange form are enantiotropically related, and the other polymorph is monotropically related to the others.

| S-EPMC6549220 | biostudies-literature

Strongly Polarized π-Extended 1,4-Dihydropyrrolo[3,2-b]pyrroles Fused with Tetrazolo[1,5-a]quinolines.

Project description:A straightforward route to 1,4-dihydropyrrolo[3,2-b]pyrroles comprised of two electron-withdrawing quinoline or tetrazolo[1,5-a]quinoline scaffolds has been developed. The versatile multicomponent reaction affording 1,4-dihydropyrrolo[3,2-b]pyrroles combined with intramolecular direct arylation enables assembly of these products in just three steps from anilines with overall yields exceeding 30%. The planarized, ladder-type heteroacenes possess up to 14 conjugated rings. These nominally quadrupolar materials exhibit efficient fluorescence with wavelengths spanning most of the visible spectrum from green-yellow for the dyes possessing biaryl bridges and orange-red for the fully fused systems. In many cases, the fluorescence quantum yields are large, the solvatofluorochromic effects are strong, and the fluorescence is maintained even in crystalline state. Analysis of the electronic structure of these molecular architectures using quantum chemical methods suggests that the character and position of the flanking heterocycle determine the shape of HOMO and LUMO and their extension to N-aryl substituents, influencing the values of molar absorption coefficient. An experimental study of the two-photon absorption (2PA) properties has revealed that it occurs in the 700-800 nm range with apparent deviation from the Laporte parity selection rule, which may be attributed to Hertzberg-Teller contribution to vibronically allowed 2PA transition.

| S-EPMC11002929 | biostudies-literature

Novel one-pot synthesis of a library of 2-aryloxy-1,4-naphthoquinone derivatives. Determination of antifungal and antibacterial activity.

Project description:The development of new antibiotics and inexpensive antifungals is an important field of research. Based on the privileged pharmacophore of lawsone, a series of phenolic ether derivatives of 1,4-naphthoquinone were synthesized easily in one step in reasonable yields. All the new compounds were characterized and tested as potential antifungal and antibacterial agents against Candida albicans, Escherichia coli and Staphylococcus aureus. Compound 55 has significant antibacterial action (as good as or better than the controls) against E. coli and S. aureus. Against C. albicans, compounds 38, 46, 47 and 60 were the best candidates as antifungals. Using a qualitative structure-activity analysis, a correlation between molar mass and antimicrobial activity was identified, regardless of the substituent group on the phenolic moiety, except for 55 and 63, where electronic effects seem more important. An in silico evaluation of the absorption, distribution, metabolism and excretion (ADME) for 37, 50, 55 and 63 was made, indicating that the classic Lipinski's rule of five applies in all cases.

| S-EPMC9218966 | biostudies-literature

Compressible and monolithic microporous polymer sponges prepared via one-pot synthesis.

Project description:Compressible and monolithic microporous polymers (MPs) are reported. MPs were prepared as monoliths via a Sonogashira-Hagihara coupling reaction of 1,3,5-triethynylbenzene (TEB) with the bis(bromothiophene) monomer (PBT-Br). The polymers were reversibly compressible, and were easily cut into any form using a knife. Microscopy studies on the MPs revealed that the polymers had tubular microstructures, resembling those often found in marine sponges. Under compression, elastic buckling of the tube bundles was observed using an optical microscope. MP-0.8, which was synthesized using a 0.8:1 molar ratio of PBT-Br to TEB, showed microporosity with a BET surface area as high as 463?m(2)g(-1). The polymer was very hydrophobic, with a water contact angle of 145° and absorbed 7-17 times its own weight of organic liquids. The absorbates were released by simple compression, allowing recyclable use of the polymer. MPs are potential precursors of structured carbon materials; for example, a partially graphitic material was obtained by pyrolysis of MP-0.8, which showed a similar tubular structure to that of MP-0.8.

| S-EPMC4632124 | biostudies-literature

A one-pot multistep cyclization yielding thiadiazoloimidazole derivatives.

Project description:A versatile synthetic procedure is described to prepare the benzimidazole-fused 1,2,4-thiadiazoles 2a-c via a methanesulfonyl chloride initiated multistep cyclization involving the intramolecular reaction of an in-situ generated carbodiimide with a thiourea unit. The structure of the intricate heterocycle 2a was confirmed by single-crystal X-ray analysis and its mechanism of formation supported by DFT computations.

| S-EPMC4311674 | biostudies-literature

One-Pot Synthesis of α-Alkyl Styrene Derivatives.

Project description:There is a significant need to develop more rapid and efficient routes to styrene derivatives, since they are extensively used in polymer sciences. This manuscript reports a one-pot synthesis of an array of α-alkyl styrene derivatives from readily available natural products (i.e., estragole and safrole). This method is regioselective, producing a rearranged adduct, under transition metal-free conditions. This methodology has broad nucleophile scope, even tolerating sterically hindered nucleophiles; it is general for carbon, nitrogen, oxygen, and sulfur nucleophiles.

| S-EPMC8359136 | biostudies-literature

Polybasic Nanomatrices Prepared By UV-initiated Photopolymerization.

Project description:A novel method for synthesizing nanoscale polymer networks that swell in acidic media is described here using photoinitiated emulsion polymerization. These nanomatrices consist of a crosslinked core of poly[2-(diethylamino)ethyl methacrylate] surface grafted with poly(ethylene glycol) (PDGP) with an average diameter of 50-150 nm. Control over mesh size, surface charge, encapsulation efficiency and in vitro biocompatibility was obtained by varying crosslinking density. The ability to image nanomatrices in their dry state using conventional scanning electron microscopy was made possible by increasing crosslinking density. Theoretical calculations of matrix mesh sizes were supported by the encapsulation of both insulin and colloidal gold 2-5 nm in diameter. The ability to sequester and control the aggregation of an inorganic phase confirmed their use as a nanocomposite matrix material. These networks could be used as imaging agents, drug delivery devices or as components of sensing devices.

| S-EPMC2880552 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data