Browse
Submit Data
Databases
API
Help

Dataset Information

36 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

MXene Core-Shell Nanosheets: Facile Synthesis, Optical Properties, and Versatile Photonics Applications.

ABSTRACT: In recent years, the transition metal carbonitrides(MXenes) have been widely applied to photoelectric field, and better performance of these applications was achieved via MXene complex structures. In our work, we proposed a MXene core-shell nanosheet composed of a Ti₂C (MXene) phase and gold nanoparticles, and applied it to mode-locked and single-frequency fiber laser applications. The optoelectronic results suggested that the performances of these two applications were both improved when MXene core-shell nanosheets were applied. As a result, we obtained a mode-locking operation with 670 fs pulses, and the threshold pump power reached to as low as 20 mW. Besides, a single-frequency laser with the narrowest linewidth of ~1 kHz is also demonstrated experimentally. Our research work proved that MXene core-shell nanosheets could be used as saturable absorbers (SAs) to promote versatile photonic applications.

SUBMITTER: Wang Y

PROVIDER: S-EPMC8398170 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Zero-Dimensional MXene-Based Optical Devices for Ultrafast and Ultranarrow Photonics Applications.

Project description:In recent years, MXene has become a hotspot because of its good conductivity, strong broadband absorption, and tunable band gap. In this contribution, 0D MXene Ti3C2Tx quantum dots are synthesized by a liquid exfoliation method and a wideband nonlinear optical response from 800 to 1550 nm is studied, which have a larger nonlinear absorption coefficient β of -(11.24 ± 0.14) × 10-2 cm GW-1. The carrier dynamic processes of 0D MXene are explored with ultrahigh time resolution nondegenerate transient absorption (TA) spectroscopy, which indicates that the TA signal reaches its maximum in 1.28 ps. Furthermore, 0D MXene is used to generate ultrashort pulses in erbium or ytterbium-doped fiber laser cavity. High signal-to-noise (72 dB) femtosecond lasers with pulse durations as short as 170 fs with spectrum bandwidth of 14.8 nm are obtained. Finally, an ultranarrow fiber laser based on 0D MXene is also investigated and has a full width at half maximum of only 5 kHz, and the power fluctuation is less than 0.75% of the average power. The experimental works prove that 0D MXene is an excellent SA and has a promising application in ultrafast and ultranarrow photonics.

| S-EPMC7675195 | biostudies-literature

Core/Shell Pigments with Polyaniline Shell: Optical and Physical-Technical Properties.

Project description:Core/shell pigments allow for the combination of the active anti-corrosion effect of the shell and the barrier effect of the core. This makes it possible to obtain anti-corrosion pigments, with a high-protective effect and low toxicity. Thus, the need for a comprehensive study of the properties of these pigments grows more urgent, before their application to paints and varnishes. The hiding power of core/shell pigments comes close to the one of pure polyaniline (PANi), when the PANi content in the pigment reaches 50 wt.%, with sulfuric and phosphoric acids used as dopants. This paper, also, shows that the blackness value of core/shell pigments with 10 wt.% PANi is around 35 and constant; for pure PANi, their blackness value is 40. When PANi content is 5 wt.%, kaolin-based pigment shows the lowest blackness, which happens due to a generally higher whiteness of kaolin. However, when the PANi content surpasses 10 wt.%, there seems to be no influence on the blackness of the core/shell pigments. The core/shell pigment with a 20 wt.% PANi is, optically, identical to a black-iron-oxide pigment. An increase in the PANi content of the core/shell pigment leads to an increase in the oil absorption of the samples. It was found that the dispersion process would be the most energy efficient for core/shell pigments, containing kaolin and talc as a core.

| S-EPMC9144958 | biostudies-literature

Magnetic and optical properties of multifunctional core-shell radioluminescence nanoparticles.

Project description:When X-rays irradiate radioluminescence nanoparticles, they generate visible and near infrared light that can penetrate through centimeters of tissue. X-ray luminescence tomography (XLT) maps the location of these radioluminescent contrast agents at high resolution by scanning a narrow X-ray beam through the tissue sample and collecting the luminescence at every position. Adding magnetic functionality to these radioluminescent particles would enable them to be guided, oriented, and heated using external magnetic fields, while their location and spectrum could be imaged with XLT and complementary magnetic resonance imaging. In this work, multifunctional monodispersed magnetic radioluminescent nanoparticles were developed as potential drug delivery carriers and radioluminescence imaging agents. The particles consisted of a spindle-shaped magnetic γ-Fe2O3 core and a radioluminescent europium-doped gadolinium oxide shell. Particles with solid iron oxide cores displayed saturation magnetizations consistent with their ~13% core volume, however, the iron oxide quenched their luminescence. In order to increase the luminescence, we partially etched the iron oxide core in oxalic acid while preserving the radioluminescent shell. The core size was controlled by the etching time which in turn affected the particles' luminescence and magnetic properties. Particles with intermediate core sizes displayed both strong magnetophoresis and luminescence properties. They also served as MRI contrast agents with relaxivities of up to 58 mM-1s-1 (r2) and 120 mM-1s-1 (r2*). These particles offer promising multimodal MRI/fluorescence/X-ray luminescence contrast agents. Our core-shell synthesis technique offers a flexible method to control particle size, shape, and composition for a wide range of biological applications of magnetic/luminescent nanoparticles.

| S-EPMC3918467 | biostudies-literature

Optical properties of anisotropic core-shell pyramidal particles.

Project description:This paper describes an approach to fabricate anisotropic core-shell particles by assembling dielectric beads within fabricated noble metal pyramidal structures. Particles with gold (Au) shells and different dielectric cores were generated, and their optical properties were characterized by single particle spectroscopy. Because of their unique geometry, these particles exhibit multiple plasmon resonances from visible to near-IR wavelengths.

| S-EPMC2670351 | biostudies-other

ZnSe/ZnS Core/Shell Quantum Dots with Superior Optical Properties through Thermodynamic Shell Growth.

Project description:Epitaxial growth of a protective semiconductor shell on a colloidal quantum dot (QD) core is the key strategy for achieving high fluorescence quantum efficiency and essential stability for optoelectronic applications and biotagging with emissive QDs. Herein we investigate the effect of shell growth rate on the structure and optical properties in blue-emitting ZnSe/ZnS QDs with narrow emission line width. Tuning the precursor reactivity modifies the growth mode of ZnS shells on ZnSe cores transforming from kinetic (fast) to thermodynamic (slow) growth regimes. In the thermodynamic growth regime, enhanced fluorescence quantum yields and reduced on-off blinking are achieved. This high performance is ascribed to the effective avoidance of traps at the interface between the core and the shell, which are detrimental to the emission properties. Our study points to a general strategy to obtain high-quality core/shell QDs with enhanced optical properties through controlled reactivity yielding shell growth in the thermodynamic limit.

| S-EPMC7467768 | biostudies-literature

Facile synthesis, microstructure and photophysical properties of core-shell nanostructured (SiCN)/BN nanocomposites.

Project description:Increasing structural complexity at nanoscale can permit superior control over photophysical properties in the precursor-derived semiconductors. We demonstrate here the synthesis of silicon carbonitride (SiCN)/boron nitride (BN) nanocomposites via a polymer precursor route wherein the cobalt polyamine complexes used as the catalyst, exhibiting novel composite structures and photophysical properties. High Resolution Transmission Electron Microscopy (HRTEM) analysis shows that the diameters of SiCN-BN core-shell nanocomposites and BN shells are 50‒400 nm and 5‒25 nm, respectively. BN nanosheets (BNNSs) are also observed with an average sheet size of 5‒15 nm. The photophysical properties of these nanocomposites are characterized using the UV-Vis and photoluminescence (PL) analyses. The as-produced composites have emission behavior including an emission lifetime of 2.5 ns (±20 ps) longer observed in BN doped SiCN than that seen for SiC nanoparticles. Our results suggest that the SiCN/BN nanocomposites act as semiconductor displaying superior width photoluminescence at wavelengths spanning the visible to near-infrared (NIR) spectral range (400‒700 nm), owing to the heterojunction of the interface between the SiC(N) nanowire core and the BN nanosheet shell.

| S-EPMC5233973 | biostudies-literature

Non-resonant Mie scattering: emergent optical properties of core-shell polymer nanowires.

Project description:We provide the in-depth characterization of light-polymer nanowire interactions in the context of an effective Mie scattering regime associated with low refractive index materials. Properties of this regime sharply contrast with these of resonant Mie scattering, and involve the formation of strictly forward-scattered and coupling-free optical fields in the vicinity of core-shell polymer nanowires. Scattering from these optical fields is shown to be non-resonant in nature and independent from incident polarization. In order to demonstrate the potential utility of this scattering regime in one-dimensional (1D) polymeric nanostructures, we fabricate polycarbonate (PC) - polyvinylidene difluoride (PVDF) core-shell nanowires using a novel iterative thermal drawing process that yields uniform and indefinitely long core-shell nanostructures. These nanowires are successfully engineered for novel nanophotonics applications, including size-dependent structural coloration, efficient light capture on thin-film solar cells, optical nano-sensors with ultrahigh sensitivity and a mask-free photolithography method suitable for the straightforward production of 1D nanopatterns.

| S-EPMC3980223 | biostudies-literature

Optical Properties of Stanene-like Nanosheets on Al<sub>2</sub>O<sub>3</sub>(0001): Implications for Xene Photonics.

Project description:Stanene is one of the most intriguing two-dimensional (2D) materials because of its nontrivial topological properties. Here, the optical properties from THz to UV of molecular beam deposited tin nanosheets on Al2O3(0001) are reported. The experimental absorption coefficient cannot be described in terms of metallic tin or tin oxides. Nonetheless, a similar optical behavior was predicted by theory for freestanding stanene, thus suggesting the formation of the 2D tin nanosheets with stanene-like properties. These findings show that 2D tin bears appealing optical properties in a broad range of the electromagnetic spectrum, thus paving the way to Xenes-based nanophotonics.

| S-EPMC8023281 | biostudies-literature

Au@Ag core-shell nanocubes with finely tuned and well-controlled sizes, shell thicknesses, and optical properties.

Project description:This paper describes a facile method for generating Au@Ag core-shell nanocubes with edge lengths controllable in the range of 13.4-50 nm. The synthesis involved the use of single-crystal, spherical Au nanocrystals of 11 nm in size as the seeds in an aqueous system, with ascorbic acid serving as the reductant and cetyltrimethylammonium chloride (CTAC) as the capping agent. The thickness of the Ag shells could be finely tuned from 1.2 to 20 nm by varying the ratio of AgNO(3) precursor to Au seeds. We also investigated the growth mechanism by examining the effects of seeds (capped by CTAC or cetyltrimethylammonium bromide(CTAB)) and capping agent (CTAC vs CTAB) on both size and shape of the resultant core-shell nanocrystals. Our results clearly indicate that CTAC worked much better than CTAB as a capping agent in both the syntheses of Au seeds and Au@Ag core-shell nanocubes. We further studied the localized surface plasmon resonance properties of the Au@Ag nanocubes as a function of the Ag shell thickness. By comparing with the extinction spectra obtained from theoretical calculations, we derived a critical value of ca. 3 nm for the shell thickness at which the plasmon excitation of the Au cores would be completely screened by the Ag shells. Moreover, these Au@Ag core-shell nanocubes could be converted into Au-based hollow nanostructures containing the original Au seeds in the interiors through a galvanic replacement reaction.

| S-EPMC2997519 | biostudies-literature

From tunable core-shell nanoparticles to plasmonic drawbridges: Active control of nanoparticle optical properties.

Project description:The optical properties of metallic nanoparticles are highly sensitive to interparticle distance, giving rise to dramatic but frequently irreversible color changes. By electrochemical modification of individual nanoparticles and nanoparticle pairs, we induced equally dramatic, yet reversible, changes in their optical properties. We achieved plasmon tuning by oxidation-reduction chemistry of Ag-AgCl shells on the surfaces of both individual and strongly coupled Au nanoparticle pairs, resulting in extreme but reversible changes in scattering line shape. We demonstrated reversible formation of the charge transfer plasmon mode by switching between capacitive and conductive electronic coupling mechanisms. Dynamic single-particle spectroelectrochemistry also gave an insight into the reaction kinetics and evolution of the charge transfer plasmon mode in an electrochemically tunable structure. Our study represents a highly useful approach to the precise tuning of the morphology of narrow interparticle gaps and will be of value for controlling and activating a range of properties such as extreme plasmon modulation, nanoscopic plasmon switching, and subnanometer tunable gap applications.

| S-EPMC4672758 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data