Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Determination of Minimum Miscibility Pressure of CO₂-Oil System: A Molecular Dynamics Study.

ABSTRACT: CO₂ enhanced oil recovery (CO₂-EOR) has become significantly crucial to the petroleum industry, in particular, CO₂ miscible flooding can greatly improve the efficiency of EOR. Minimum miscibility pressure (MMP) is a vital factor affecting CO₂ flooding, which determines the yield and economic benefit of oil recovery. Therefore, it is important to predict this property for a successful field development plan. In this study, a novel model based on molecular dynamics to determine MMP was developed. The model characterized a miscible state by calculating the ratio of CO₂ and crude oil atoms that pass through the initial interface. The whole process was not affected by other external objective factors. We compared our model with several famous empirical correlations, and obtained satisfactory results-the relative errors were 8.53% and 13.71% for the two equations derived from our model. Furthermore, we found the MMPs predicted by different reference materials (i.e., CO₂/crude oil) were approximately linear (R² = 0.955). We also confirmed the linear relationship between MMP and reservoir temperature (T_R). The correlation coefficient was about 0.15 MPa/K in the present study.

SUBMITTER: Li D

PROVIDER: S-EPMC8401628 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Experimental Determination of Molecular Weight-Dependent Miscibility of PBAT/PLA Blends.

Project description:Blends of poly(butylene adipate-co-terephthalate) (PBAT) and polylactide (PLA) have attracted the attention of academia and industry as a sustainable material. Unfortunately, this combination results in problems related to poor miscibility on the molecular level. This study mainly aims to determine the influence of molecular weights on the miscibility of PBAT/PLA blends. First, polymers with various molecular weights were obtained by the hydrolysis of PBAT and methanolysis of PLA. Second, the two components were solution-blended with different molecular weights and weight ratios. Third, each blend was heated to the molten state and subsequently stored at room temperature. Finally, the samples were tested using DSC and SEM. The thermal analysis indicated that the difference in glass transition temperature between both components decreased from about 91 °C to 57 °C and 0 °C, as the number-average molecular weights (Mn) decreased from 52/127 to 9.4/9 and 6.3/6.6 kg/mol. Moreover, the morphology changed from phase-separated with dispersed large particles gradually to uniform and homogeneous. This experimental work validated the trends predicted in the previous study, namely that PBAT/PLA blends changed the state from immiscible to partially miscible to fully miscible with decreasing Mn values. Moreover, we discussed the influencing factors such as weight ratio, temperature, and molecular structure on the miscibility. Based on the results, this work contributes to developing partially miscible and compatible blends without additives.

| S-EPMC8586918 | biostudies-literature

Self-microemulsifying drug delivery system and nanoemulsion for enhancing aqueous miscibility of Alpinia galanga oil.

Project description:Alpinia galanga oil (AGO) possesses various activities but low aqueous solubility limits its application particularly in aquatic animals. AGO has powerful activity on fish anesthesia. Ethanol used for enhancing water miscible of AGO always shows severe side effects on fish. The present study explores the development of self-microemulsifying drug delivery systems (SMEDDS) and nanoemulsions (NE) to deliver AGO for fish anesthesia with less or no alcohol. Pseudoternary phase diagrams were constructed to identify the best SMEDDS-AGO formulation, whereas NE-AGO were developed by means of high-energy emulsification. The mean droplet size of the best SMEDDS-AGO was 82 ± 0.5 nm whereas that of NE-AGO was 48 ± 1.6 nm. The anesthetic effect of the developed SMEDDS-AGO and NE-AGO in koi (Cyprinus carpio) was evaluated and compared with AGO ethanolic solution (EtOH-AGO). It was found that the time of induction the fish to reach the surgical stage of anesthesia was dose dependent. NE-AGO showed significantly higher activity than SMEDDS-AGO and EtOH-AGO, respectively. EtOH-AGO caused unwanted hyperactivity in the fish. This side effect did not occur in the fish anesthetized with SMEDDS-AGO and NE-AGO. In conclusion, SMEDDS and NE are promising delivery systems for AGO.

| S-EPMC5708845 | biostudies-literature

In Silico Determination of Gas Permeabilities by Non-Equilibrium Molecular Dynamics: CO2 and He through PIM-1.

Project description:We study the permeation dynamics of helium and carbon dioxide through an atomistically detailed model of a polymer of intrinsic microporosity, PIM-1, via non-equilibrium molecular dynamics (NEMD) simulations. This work presents the first explicit molecular modeling of gas permeation through a high free-volume polymer sample, and it demonstrates how permeability and solubility can be obtained coherently from a single simulation. Solubilities in particular can be obtained to a very high degree of confidence and within experimental inaccuracies. Furthermore, the simulations make it possible to obtain very specific information on the diffusion dynamics of penetrant molecules and yield detailed maps of gas occupancy, which are akin to a digital tomographic scan of the polymer network. In addition to determining permeability and solubility directly from NEMD simulations, the results shed light on the permeation mechanism of the penetrant gases, suggesting that the relative openness of the microporous topology promotes the anomalous diffusion of penetrant gases, which entails a deviation from the pore hopping mechanism usually observed in gas diffusion in polymers.

| S-EPMC4384093 | biostudies-literature

Determination of the Gas-Oil Ratio below the Bubble Point Pressure Using the Adaptive Neuro-Fuzzy Inference System (ANFIS).

Project description:Determining the solution gas-oil ratio (R s) below the bubble point is a vital requirement that aids in multiple production engineering and reservoir analysis issues. Currently, there are some models available for the determination of the solution gas-oil ratio under the bubble point. However, they still may prove unreliable due to the applied assumptions and their specification to operate only under a particular range of data. In this study, the neuro-fuzzy, i.e., the adaptive neuro-fuzzy inference system (ANFIS) approach, is utilized to develop an accurate and dependable model for determining the R s below the bubble point pressure. A total of 376 pressure-volume-temperature datasets from Sudanese oil fields were used to establish the proposed ANFIS model. The trend analysis was applied to affirm the proper relationships between the inputs and outputs. Furthermore, using different statistical error analyses, the developed model was benchmarked against widely used empirical methods to evaluate the proposed method's performance in predicting the R s at pressures below the bubble point. The proposed ANFIS model performs with an average absolute percent relative error of 10.60% and a correlation coefficient of 99.04%, surpassing the previously studied correlations.

| S-EPMC9202275 | biostudies-literature

Transport Properties of Waxy Crude Oil: A Molecular Dynamics Simulation Study.

Project description:To study the effects of paraffin on viscosity of waxy crude oil and transport properties of small molecules, light and waxy crude oil models were investigated at atmospheric pressure and 293-323 K temperature range using atomistic molecular dynamics simulations. The optimized parameters for liquid simulations all-atom (OPLS-AA) and atomistic polarizable potential for liquids, electrolytes, and polymers (APPLE&P) force fields were employed. The self-diffusion coefficients, viscosity, and paraffin configurations were compared for two oil models and between the two employed force fields. However, the behavior of paraffin molecules predicted by two force fields was quite different. Simulations using the OPLS-AA force field showed crystallization of longer paraffin molecules below 323 K, while simulations with the APPLE&P force field demonstrated a homogeneous mixture down to 293 K. To provide additional validation of the employed force fields, the density, diffusion coefficient, and crystallization of pure alkanes were compared with experimental data. The density and diffusion coefficients of n-C6 and n-C14 simulated with the APPLE&P force field were found to be in much closer agreement with the experimental data. The OPLS-AA force field was found to overestimate the crystallization temperature of pure alkanes. Therefore, simulations with the APPLE&P provide more realistic description of the waxy oil structure and transport properties. In this temperature range, the paraffin molecules are homogeneously distributed in the mixture, and viscosity of the system increased by a factor of two compared to light oil. Crystallization of paraffins requires lower temperatures or/and the presence of other components such as nanoparticles or asphaltene molecules to facilitate nucleation.

| S-EPMC7407551 | biostudies-literature

Ab initio molecular dynamics study of high-pressure melting of beryllium oxide.

Project description:We investigate, through first-principles molecular dynamics simulations, the high-pressure melting of BeO in the range 0 ≤ p ≤ 100 GPa. The wurtzite (WZ), zinc blend (ZB), and rocksalt (RS) phases of BeO are considered. It is shown that below 40 GPa, the melting temperature for the WZ phase is higher than that for the ZB and RS phases. When the pressure is beyond 66 GPa, the melting temperature for the RS phase is the highest one, in consistent with the previously reported phase diagram calculated within the quasiharmonic approximation. We find that in the medium pressure range between 40 to 66 GPa, the ZB melting data are very close to those of RS, which results from the fact that the ZB structure first transforms to RS phase before melting. The ZB-RS-liquid phase transitions have been observed directly during the molecular dynamics runs and confirmed using the pair correlation functions analysis. In addition, we propose the melting curve of BeO in the form Tm = 2696.05 (1 + P/24.67)(0.42), the zero-pressure value of 2696.05 K falling into the experimental data range of 2693 ~ 2853 K.

| S-EPMC3998012 | biostudies-other

Miscibility and ordered structures of MgO-ZnO alloys under high pressure.

Project description:The MgxZn(1-x)O alloy system may provide an optically tunable family of wide band gap materials that can be used in various UV luminescences, absorption, lighting, and display applications. A systematic investigation of the MgO-ZnO system using ab initio evolutionary simulations shows that MgxZn(1-x)O alloys exist in ordered ground-state structures at pressures above about 6.5 GPa. Detailed enthalpy calculations for the most stable structures allowed us to construct the pressure-composition phase diagram. In the entire composition, no phase transition from wurzite to rock-salt takes place with increasing Mg content. We also found two different slops occur at near x = 0.75 of Eg-x curves for different pressures, and the band gaps of high pressure ground-state MgxZn(1-x)O alloys at the Mg concentration of x > 0.75 increase more rapidly than x < 0.75.

| S-EPMC4104395 | biostudies-literature

Estimating CO2 Emission Savings from Ultrahigh Performance Concrete: A System Dynamics Approach.

Project description:Ordinary Portland cement concrete (OPC) is the world's most consumed commodity after water. However, the production of cement is a major contributor to global anthropogenic CO2 emissions. In recent years, ultrahigh performance concrete (UHPC) has emerged as a strong contender to replace OPC in diverse applications. UHPC has much higher mechanical strength, and thus less material is used in a structural member to resist the same load. Moreover, it has a much longer service life, reducing the long-term need for repair and replacement of aging civil infrastructure. Thus, UHPC can enhance the sustainability of cement and concrete. However, there is currently no robust tool to estimate the sustainability benefits of UHPC. This task is challenging considering that such benefits can only be captured over the long-term since variables, such as population growth and cement demand per capita, become more uncertain. In addition, the problem of CO2 emissions from cement and concrete is a complex system affected by time-dependent feedback. The System Dynamics (SD) method has specifically been developed for modeling such complex systems. Accordingly, a SD model was developed in this study to test various pertinent policy scenarios. It is shown that UHPC can reduce cumulative CO2 emissions of cement and concrete-over the studied simulation period-by more than 17%. If supplementary cementitious materials are further deployed in UHPC and new technologies permit reducing the carbon footprint per unit mass of cement, emission savings can become more substantial. The model offers a flexible framework where the user controls various inputs and can extend the model to account for new data, without the need for reconstruction of the entire model.

| S-EPMC7924067 | biostudies-literature

Indoor Test System for Liquid CO2 Phase Change Shock Wave Pressure with PVDF Sensors.

Project description:Liquid carbon dioxide phase change fracturing technology (LCPCFT) has been widely used in engineering blasting due to the advantage of no flames, and no toxic and harmful gas. However, few studies have been conducted on the acquisition of shock wave pressure and its loading characteristics, which are key parameters in fracturing. Referring to the CO2 in-situ fracturing technology, an indoor test system for shock wave pressure generated during LCPCFT has been built, with a protected polyvinylidene fluoride (PVDF) piezoelectric sensor. Then three verification experiments with different radial distances between the fracturing tube and test points were carried out on the test system, and in each experiment, four PVDF sensors as four test points were arranged with different axial distance from the detonating point to test the pressure distribution. The experimental results show that when the radial distance between the fracturing tube and test points is not too large (?345 mm), the pressure generated during LCPCFT is approximately uniformly distributed within the axial length of the fracturing tube, but when it is relatively large (?895 mm), the results between different test points are in a certain degree of dispersion. And finally, this paper uses the intraclass correlation coefficient (ICC) and coefficient of variation (CV) of peak pressure and impulse to process the test results to evaluate the reliability and stability of the test system. Evaluation results show that the test results are in good consistency. The test system in this paper has good stability and high reliability. The test system provides a useful tool for accurately obtaining the shock wave pressure, which is helpful for further research on LCPCFT.

| S-EPMC7219579 | biostudies-literature

Molecular Dynamics Computational Study of Sustainable Green Surfactant for Application in Chemical Enhanced Oil Recovery

Project description: Not available

| S-EPMC11209909 | biostudies-literature