Dataset Information

Anterior reduction and C1-ring osteosynthesis with Jefferson-fracture reduction plate (JeRP) via transoral approach for unstable atlas fractures.

ABSTRACT:

Background

To introduce a novel transoral instrumentation in the treatment of unstable fractures of the atlas.

Methods

From January 2008 to May 2018, 22 patients with unstable C1 fractures who received Jefferson-fracture reduction plate (JeRP) via transoral approach were retrospectively analyzed. The case history and the radiographs before and after surgery were noted. The type of fracture, the reduction of the fracture, and position of the internal fixation were assessed through preoperative and postoperative CT scans.

Results

All 22 patients successfully underwent anterior C1-ring osteosynthesis using the JeRP system, with a follow-up of 26.84 ± 9.23 months. Among them, 9 patients had transverse atlantal ligament (TAL) injury, including 3 in Dickman type I and 6 in type II. The preoperative lateral mass displacement (LMD) decreased from 7.13 ± 1.46 mm to 1.02 ± 0.65 mm after the operation. Bone union was achieved in all patients without implant failure or loss of reduction. There were no surgery-related complications, such as wound infection, neurological deficit, or vertebral artery injury. However, atlantoaxial dislocation occurred in 3 patients with Dickman type I TAL injury 3 months postoperatively without any neurological symptoms or neck pain.

Conclusions

Transoral C1-ring osteosynthesis with JeRP is an effective surgical strategy to treat unstable atlas fractures with a safe, direct, and satisfactory reduction. The primary indication for the JeRP system is an unstable fracture (Gehweiler type I/III) or/ and TAL injury (Dickman type II).

SUBMITTER: Tu Q

PROVIDER: S-EPMC8406960 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:IntroductionStable reduction and rigid fixation of the sacrum and posterior ring structures are of paramount importance in the management of complex pelvic ring disruptions, Tile B and C. The major concern with the use of conventional methods, like iliosacral screws and iliolumbar fixations is the increased risk for surgical and implant-related morbidity, especially in difficult situations, such as comminuted, bilateral sacral fractures, and fractures in the dysmorphic sacrum. Although various biomechanical studies have reported the posterior trans-iliac plates to provide maximum resistance to distracting forces by the principle of tension band, the literature pertaining to this implication in clinical studies has been limited. The purpose of our study was to assess the efficacy of the trans-iliac plate in the management of unstable sacral fractures and its utility in pelvic disruptions associated with surgical site morbidity.MethodologyThe patients with unstable pelvic fractures (Tile B and C) between 2013 and 2017 were retrospectively analyzed at a trauma center. First, the anterior ring disruptions were stabilized, and then, the sacral fractures (Denis Zone 1-3) treated by posterior tension band plate osteosynthesis (3.5 mm reconstruction plate) were included. Demographic and perioperative data were assessed. The outcome variables studied were surgical morbidity, pain, loss of reduction, and union and implant-related complications. The outcomes were graded using Lindhal's (radiological) and Majeed (functional assessment) scores.ResultsThirteen patients (nine male/four female) with a median age of 42 years, had sacral fractures in Denis zones 1/2/3 (four/ten/one, respectively), resulting from Tile pelvic injury B and C were included. The pelvis in five patients was stabilized only with the posterior plate due to the anteriorly-associated surgical site morbidity (Morel-Lavallee lesions and urinary tract injuries). The mean follow-up was 21.5 ± 2.8 months. All fractures had a radiological union by 22 weeks; Lindhal's grade A in ten patients and grade B in three patients. Two out of three patients recovered from preoperative neurological involvement. Two had complained of implant prominence (BMI<19 kg/m2) and there were no implant failures. Four had excellent, six had good, and three had fair or poor functional outcomes.ConclusionThe posterior trans-iliac plate is a minimally invasive and safe procedure that can be used in a wide range of unstable sacral fractures with notably less implant failure rate. The rigid posterior construct restores the principle tension between the iliac blades and minimizes the secondary displacement of the anterior disrupted structures, thereby useful in managing ring disruptions with surgical site morbidity.

Project description:Nonsurgical treatment of Jefferson burst fractures (JBF) confers increased rates of C1-2 malunion with potential for cranial settling and neurologic sequels. Hence, fusion C1-2 was recognized as the superior treatment for displaced JBF, but sacrifies C1-2 motion. Ruf et al. introduced the C1-ring osteosynthesis (C1-RO). First results were favorable, but C1-RO was not without criticism due to the lack of clinical and biomechanical data serving evidence that C1-RO is safe in displaced JBF with proven rupture of the transverse atlantal ligament (TAL). Therefore, our objectives were to perform a biomechanical analysis of C1-RO for the treatment of displaced Jefferson burst fractures (JBF) with incompetency of the TAL. Five specimens C0-2 were subjected to loading with posteroanterior force transmission in an electromechanical testing machine (ETM). With the TAL left intact, loads were applied posteriorly via the C1-RO ramping from 10 to 100 N. Atlantoaxial subluxation was measured radiographically in terms of the anterior antlantodental interval (AADI) with an image intensifier placed surrounding the ETM. Load-displacement data were also recorded by the ETM. After testing the TAL-intact state, the atlas was osteotomized yielding for a JBF, the TAL and left lateral joint capsule were cut and the C1-RO was accomplished. The C1-RO was subjected to cyclic loading, ramping from 20 to 100 N to simulate post-surgery in vivo loading. Afterwards incremental loading (10-100 N) was repeated with subsequent increase in loads until failure occurred. Small differences (1-1.5 mm) existed between the radiographic AADI under incremental loading (10-100 N) with the TAL-intact as compared to the TAL-disrupted state. Significant differences existed for the beginning of loading (10 N, P = 0.02). Under physiological loads, the increase in the AADI within the incremental steps (10-100 N) was not significantly different between TAL-disrupted and TAL-intact state. Analysis of failure load (FL) testing showed no significant differences among the radiologically assessed displacement data (AADI) and that of the ETM (P = 0.5). FL was Ø297.5 +/- 108.5 N (range 158.8-449.0 N). The related displacement assessed by the ETM was Ø5.8 +/- 2.8 mm (range 2.3-7.9). All specimens succeeded a FL >150 N, four of them >250 N and three of them >300 N. In the TAL-disrupted state loads up to 100 N were transferred to C1, but the radiographic AADI did not exceed 5 mm in any specimen. In conclusion, reconstruction after displaced JBF with TAL and one capsule disrupted using a C1-RO involves imparting an axial tensile force to lift C0 into proper alignment to the C1-2 complex. Simultaneous compressive forces on the C1-lateral masses and occipital condyles allow for the recreation of the functional C0-2 ligamentous tension band and height. We demonstrated that under physiological loads, the C1-RO restores sufficient stability at C1-2 preventing significant translation. C1-RO might be a valid alternative for the treatment of displaced JBF in comparison to fusion of C1-2.